2021 FatBook Canadian Catalogue Drag Specialties

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 4 All part numbers in BLUE are new for 2021. 241 See OLDBOOK For Early Model Applications FOR DRESSER/TOURING PART # DESCRIPTION 0801-0601 For 08‑20 FLHT/​FLHR/​FLTR/​FLHX ONE-PIECE HEATED TOURING SEAT • Mustang’s one-piece touring design provides the rider and passenger with the fullest, most comfortable seat possible • Dual-zone high/​low heat settings for driver and passenger right on the side of the seat • Illuminated switches • Does not require any OEM controllers or switches to function • Seat pan is constructed with extra-rugged, triple-layered fiberglass • Wire harness hooks to accessory port in front of battery; seat has power only when the ignition key is turned on and accessory toggle switch below the handlebars is flipped up • Baseplate open in the middle to accept a Mustang or stock H-D driver backrest kit • 17” W front bucket, 14” W rear seat • Seat will fit with a handrail • Made in the U.S.A. NOTE: Installation on 14-20 FL Touring requires use of H-D adapter 69200722 or 69201599, depending on the year. If the accessory port is already in use, install H-D adapter 70264-94A or 70270-04, depending on the year, to add additional ports. Seat will fit with handrail. All seating position notes are compared to the standard Electra Glide touring position. If your seat is a reduced-reach, extended-reach or low seat, these comparisons may not apply. PART # DESCRIPTION 0801-0604 For 08‑20 FLHT/​FLHR/​FLTR/​FLHX LOWDOWN ™ SEAT WITH DRIVER BACKREST • High-quality expanded vinyl cover with a marine-grade fiberglass baseplate • 16.5” W front bucket, 14” W rear seat • Seat will fit with a handrail • Contoured backrest pad pivots to match back angle • Notched backrest post with four easy snap-in-place height adjustment positions • Backrest folds completely flat for ease of getting on motorcycle • Easily remove/​install backrest without removing seat, no tools needed • Adjust backrest up to 2”, forward or back, while rider is seated • Made in the U.S.A. PART # DESCRIPTION FOR 08‑20 FLHR/​FLHX/​FLTR/​FLHT 0801-0461 Smooth style w/ black studs; 17” W front, 14” W rear 0801-0456 Smooth style w/ no studs; 17” W front, 14” W rear 0801-0458 Regal style w/ no studs; 17” W front, 14” W rear PART # DESCRIPTION FOR 99‑07 FLHR, 06‑07 FLHX (EXCEPT FLHRS) 0805-0029 Smooth style w/ no studs; 17” W front, 14” W rear FOR 99‑07 FLHT/​FLTR 0805-0037 Smooth style w/ no studs; 18” W front, 15” W rear 0805-0034 Regal style w/ no studs; 18” W front, 15” W rear ONE-PIECE ULTRA TOURING SEATS • The ultimate in design and cushioning • Top covering made of highest-quality expanded vinyl • Nose is narrower than stock; allows for optimum rider comfort and less knee bend • Optional driver backrest kits are available separately for the models listed; see page 249 for kits • Made in the U.S.A. 0801‑0456 0801‑0458 0805‑0034 0805‑0029

RkJQdWJsaXNoZXIy NDI5NTY=