2021 Parts Canada Snow

RIDER & SLED ACCESSORIES partscanada.com 2021 PARTS CANADA SNOWMOBILE BOLD MAGENTA part numbers are new for 2021 120 BALL ACCESSORY BASE ADAPTER FOR B-SIZE SOCKET ARM • The ideal accessory if you are looking to mount more than one device but cannot locate multiple mounting points on your motorcycle or vehicle • Connects another device to existing RAM Mount • Includes 1” ball connecting to a 1 / 4 ”-20 threaded stud with a length of 1.6” • Threads on this ball replace the bolt in any B-size socket arm, and the ball connects to middle of socket arm on the opposite side of the tightening knob NOTE: Socket arm assembly not included. RAM MOTORCYCLE BRAKE/​ CLUTCH RESERVOIR BASE WITH 1” BALL • Powdercoated marine-grade aluminum • 1” rubber ball B-size • Connects to handlebar clutch/​ brake on left or right side • Base fits control clamps on motorcycle with 40mm x 6mm stainless steel hardware provided in kit • Hole centers on base have a minimum width of 0.94” and a maximum of 1.58” RAM MOUNT FORK STEM BASES • Cleanest way to mount small electronics • PART #0603-0898 consists of a fork stem base, short length double- socket arm and RAM X-Grip ® ; holder dimensions: 1.75”-4.5” W, 0.875” D • Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit • Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from .5”-1.10” • Powdercoated marine-grade aluminum RAM MOUNT TOUGH-BALL ™ BASE • Features 1” diameter rubber ball connected to a 1 / 4 ”-20 x .25” male-threaded post • Male thread matches most standard camera and camcorder female threads found on the bottom of the camera NPI DISPLAY HANDLE • Allows consumers to see Ram Mount Products in use • Mounts a handlebar of your choosing to display • No charge with qualifying purchase; see your sales rep for details RAM MOUNT MALE-THREAD BASES WITH 1” BALL • Powdercoated marine-grade aluminum and rubber construction • Choice of M10 x 1.25 pitch or M10 x 1.50 pitch thread; both with 1” “B”-size rubber ball • PART #0636-0063 features M10 1.25 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.5mm and the thread length is 10.15mm • PART #0636-0064 features M10 x 1.5 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.3mm and the thread length is 10.5mm DESCRIPTION PART # Ball accessory base for B‑size socket arm 0636‑0062 DESCRIPTION PART # Brake/​clutch reservoir base w/ 1” ball 0603‑0891 DESCRIPTION PART # Fork stem w/ 1” ball 0603‑0457 X‑Grip ® mount w/ fork stem base 0603‑0898 DESCRIPTION PART # RAM Tough‑Ball ™ base 0636‑0065 DESCRIPTION PART # NPI display handle 9903‑0501 DESCRIPTION PART # M10 x 1.25 base 0636‑0063 DESCRIPTION PART # M10 x 1.5 base 0636‑0064 0603‑0457 0636‑0063

RkJQdWJsaXNoZXIy NDI5NTY=