BOLD MAGENTA part numbers are new for 2022 AUDIO/COMMUNICATION & MOUNTS PARTSCANADA .COM ATV/UTV | 2022 117 DESCRIPTION PART # GoPro® camera adapter 0603-0475 GOPRO® CAMERA ADAPTER • High-strength composite construction • Consists of a 1” diameter rubber ball, connected to a custom GoPro® adapter • Rubber ball design dampens shock and vibration, helping to extend the life of your camera • Multiple articulation and adjustment points for perfect viewing angles • Attaches directly to the underside of the camera, replacing the factory mounting bracket • Compatible with GoPro cameras including HD HERO, HD HERO2, HD HERO3 and HD HERO 960 • Mounts to many RAM double-socket arms and mounts (sold separately) NOTE: Camera not included. DESCRIPTION PART # 1” rubber ball w/ round base; 1/4”-20 thread 0603-0473 1” rubber ball w/ 2.5” round base; 1/4”-20 thread 0603-0474 1” rubber ball with 1/4”-20 thread; does not include round base 0603-0892 RAM UNIVERSAL CAMERA AND CAMCORDER ADAPTERS • Consists of a 1” diameter rubber ball, connected to a round base with 1/4”-20 camera thread • The round base provides extra support and stability for cameras that rest on top of it • The male 1/4”-20 threaded steel stud will connect to any standard female thread found on camcorders and digital cameras • PART #0603-0892 consists of a 1” diameter rubber ball with 1/4”-20 thread; does not include round base • Compatible cameras include Contour GPS, Contour HD, Gobandit GPS-HD, GoPro® HD helmet HERO, GoPro HD Motorsports HERO, GoPro HD Surf HERO, GoPro Helmet HERO Wide, GoPro Motorsports HERO, GoPro Motorsports HERO Wide, GoPro RC HERO, GoPro Surf Hero and GoPro Wide HERO DESCRIPTION PART # RAM socket arm 0603-0942 RAM SOCKET ARM • High-strength composite • Features a long, preassembled extension pole with 1” and 1.5” ball single open sockets • Socket ends swivel 360°, allowing you to rotate the camera adapter in any direction • Pole length (socket end to socket end) is 18” DESCRIPTION PART # Ball w/ adapter AMPS hole 0603-0471 Ball w/ adapter diamond-shaped 0603-0472 RAM MOUNT ADAPTERS • Marine-grade aluminum with a black powdercoat finish • 1” rubber ball • Predrilled holes in base allows mounting to a variety of arms and cradles DESCRIPTION PART # RAM mount Tough-Ball™ base 0636-0065 RAM MOUNT TOUGH-BALL™ BASE • Features 1” diameter rubber ball connected to a 1/4”-20 x .25” male threaded post • Male thread matches most standard camera and camcorder female threads found on the bottom of the camera DESCRIPTION PART # X-Grip® cradle 0603-0478 4-pk. post caps; black 0603-0645 X-Grip replacement tether 0603-0685 RAM UNIVERSAL X-GRIP® CELL PHONE CRADLE WITH 1” BALL • High-strength composite and rustproof, marine-grade stainless steel construction • Spring-loaded holder expands and contracts for perfect fit on your device • Rubber-coated tips will hold device firm and stable • Includes 1” ball; mount adapter is not required • Versatility of holder allows for attachment to many RAM arms • Cradle dimensions: minimum width = 1.875” (minimum height = 4.25”) maximum width = 3.25” (minimum height = 2.25”) depth = 0.875” • X-Grip® includes a device tether • Made in the U.S.A. NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. DESCRIPTION PART # RAM universal Finger-Grip™ cradle 0603-0477 RAM UNIVERSAL FINGER-GRIP™ CRADLE • This mount is designed to hold cell phones and electronic devices • High-strength composite • Comes with three sets of four flexible rubber-coated fingers placed along the sides to grip your device • The fingers open by squeezing the ends of the holder • The bottom of the holder includes a back plate that adds support to the device being held by the mount • Can also be used with several other phone accessories • The spine plate contains the universal AMPS and 1.5” x 2” hole patterns • Height dimensions: minimum with top and bottom plates is 5.25” and maximum with top and bottom plates is 6.0” • The top and bottom plates can be removed for larger devices • Spine plate dimensions: 3”W x 3” H • Using short-arm side clamps: maximum depth is 0.75”, minimum width is 1.25” and maximum width is 3.0” • Using medium-arm side clamps: maximum depth is 1.25”, minimum width is 1.5” and maximum width is 3.5” • Using long-arm side clamps: maximum depth is 1.6”, minimum width is 2.25” and maximum width is 3.5” • Made in the U.S.A. NOTE: Does not come with ball mount adapter; use PART #0603-0472 to mount to RAM double-socket arm. 0603-0473 0603-0474 0603-0471 0603-0472 0603-0478 0603-0685
RkJQdWJsaXNoZXIy NDI5NTY=