2022 Parts Canada Helmet & Apparel

BOLD MAGENTA part numbers are new for 2022 SEE PAGE 7 FOR AN IMPORTANT SAFETY WARNING PARTSCANADA.COM 2022 | HELMET & APPAREL OFFROAD HELMETS 122 SM-5 HELMETS • Constructed from a special lightweight and impact resistant thermo-injected polymer results in a significantly lighter helmet with increased structural strength and outer shell uniformity in two outer shell sizes • Inner shell includes multi-density advanced EPS construction for optimal impact absorption performance in three sizes • Features two concepts for impact energy management including a resin-coated inner shell surface that noticeably improves impact resistance and reduces linear acceleration values and an elastic joint to connect the helmet’s inner shell and comfort liner to move independently in a crash scenario with an oblique impact, thereby spreading the energy forces from an impact, reducing rotational acceleration • Uses Alpinestars Emergency Release System (ERS) consisting of removable cheek pads for safe, quick and easy removal of the helmet by trained medical professionals/​ emergency responders in the event of a crash RAYON SIZE (E) GRAY/​BLACK/​SILVER (F) BLACK/​WHITE/​ORANGE S 0110-6918 0110-6924 M 0110-6919 0110-6925 SIZE (E) GRAY/​BLACK/​SILVER (F) BLACK/​WHITE/​ORANGE L 0110-6920 0110-6926 XL 0110-6921 0110-6927 ROVER SIZE (A) BLACK/​FLUO YELLOW/​GRAY (B) BLACK/​FLUO RED/​GRAY (C) BLACK/​CAMO (D) SAND/​CAMO S 0110-6906 0110-6912 0110-7618 0110-7624 M 0110-6907 0110-6913 0110-7619 0110-7625 L 0110-6908 0110-6914 0110-7620 0110-7626 XL 0110-6909 0110-6915 0110-7621 0110-7627 2X - - 0110-7622 0110-7628 • The ERS features easy to locate pull-tabs for rapid release of the cheek pads, thus minimizing risk of additional injury • Includes a multi-angle, quick-release visor system that is flush over the helmet’s shell to diminish the visor protrusion from the helmet thereby enhancing safety, doesn’t use screws used in the visor for increased levels of safety and convenience to be easily adjusted and allows for ease of detachment and reconnection from the helmet in order to facilitate helmet cleaning and maintenance • Designed to offer exceptional ventilation to prevent overheating on warm track/​trail days, with the inner air network channeling combining with the outer-shell’s multi-air inlets and exhaust ports for effective ventilation and high levels of heat transfer exchange • Hydration tube compatible channels are intelligently integrated into the helmet’s cheek pads for convenience and performance • See helmet size chart on page 120 before ordering • DOT FMVSS218 and ECE 22.05 certified A D B C E F