BOLD MAGENTA part numbers are new for 2022 PARTSCANADA.COM 2022 | OFFROAD HANDLEBARS & HAND CONTROLS 204 CABLE HOUSING SIZE PART # 5mm (for 1.5mm wire) BA-01104 6mm (for 2.0mm wire) BA-01105 7mm (for 2.5mm wire) BA-01103 CABLE WIRE DESCRIPTION PART # 1.2mm (.047”) w/ 4.5mm ball (1550mm L (61”)) 875068 1.5mm (.060”) BA-01100 2.0mm (.080”) BA-01101 2.0mm (.080”) w/ 8 x 10 barrel (1650mm L (65”)) 875067 2.5mm (.100”) BA-01102 BULK CABLE COMPONENTS CABLE WIRE • 100’ bulk steel cable wire for custom cable fabrication or individual lengths as noted CABLE HOUSING • Bulk cable housing for custom cable fabrication • 50’ L DESCRIPTION TYPE PART # Throttle ball 7/32” for 1.5mm wire A BA-01000 Carb end for 1.5mm wire B BA-01001 Carb end (short) for 1.5mm wire B BA-01012 Barrel nipple 3/8” for 2mm wire C BA-01002 Barrel nipple 5/16” for 2mm wire C BA-01003 Barrel nipple 5/16” for 2.5mm wire C BA-01009 Cable housing end for 5mm housing D BA-01004 Cable housing end for 6mm housing D BA-01005 Cable housing end for 7mm housing D BA-01006 DESCRIPTION TYPE PART # Clutch cable nipple for 2.0mm wire E BA-01007 Clutch cable nipple for 2.5mm wire E BA-01008 Barrel nipple 6 x 10mm for 1.5mm wire F BA-01010 Barrel nipple 6 x 7mm for 1.5mm wire F BA-01011 Mid-cable adjuster for 5mm housing G BA-01015 Screw-in adapter for universal cable to CR-type throttle - 875018 Throttle cap cable adjuster screw - 8750151 Cable angle screw, Mikuni carb top - 875016 1 Fits Motion Pro TORS eliminator carb cap for Mikuni carbs; not for use with stock carb cap. CABLE FITTINGS • Cable fittings for repairing or custom cable fabrication • Sold in 10-packs A B C D E F G DESCRIPTION PART # T3 clutch cable bracket 875000 T3 CLUTCH CABLE BRACKET FOR HONDA CRF450R 09-14 • Engine side mounting bracket for T3 clutch cable • Constructed from billet 6061 aluminum DESCRIPTION HOUSING LENGTH FREE LENGTH HOUSING SIZE TOP FITTING BOTTOM FITTING PART # NOTES Throttle or compression release 68” 4.4” 5mm Ball BBL 875077 Extra-long all-purpose mid adjuster. Cut off end not needed. Throttle or compression release 40” 2.4” 5mm Ball - 875078 Ball top with mid adjuster. Clutch or brake cable 60” 8.4” 6mm BBL - 875079 2mm wire; 5/16” with 3/8” adapter top, loose lower. Throttle 36.375” - - - - 875075 Fits Mikuni 36-38, Bing or Keihin round slide. UNIVERSAL CABLES • Sold each 875075 875079 BA-01105 BA-01101
RkJQdWJsaXNoZXIy NDI5NTY=