BOLD MAGENTA part numbers are new for 2022 PARTSCANADA.COM 2022 | OFFROAD BIKE STANDS & ACCESSORIES 88 DESCRIPTION PART # RAM composite double-socket swivel and ratchet arm 0603-0896 RAM COMPOSITE DOUBLE-SOCKET SWIVEL AND RATCHET ARM • High-strength composite, double-socket swivel and ratchet arm features 360° center rotation and 180° swivel joint • Overall length of 6.25” and a socket-to-socket length of 5.5” • Central pivot point provides unsurpassed adjustability for 1” B-size ball bases, device holders and adapter connected via the sockets • Attaches to any B-size RAM ball component DESCRIPTION PART # Double-socket arm w/ swivel 0603-0470 DOUBLE-SOCKET ARM WITH SWIVEL • High-strength composite • Consists of double 1” diameter open-ball sockets with a 360° rotation point at the center and a connecting swivel joint that rotates forward and back 180° • The rubber ball and socket at either end and a central pivot point provides unsurpassed adjustability • The RAM ball sockets maximize ball coverage for optimal fit • 5” overall length DESCRIPTION PART # Short 2” 0603-0467 Medium 3” 0603-0468 Long 5.2” 0603-0469 RAM DOUBLESOCKET ARMS • Marine-grade aluminum with a black powdercoated finish • Fit 1” rubber ball, bases and adapters 0603-0468 DESCRIPTION PART # Ball accessory base adapter for B-size socket arm 0636-0062 BALL ACCESSORY BASE ADAPTER FOR B-SIZE SOCKET ARM • The ideal accessory if you are looking to mount more than one device but cannot locate multiple mounting points on your motorcycle or vehicle • Connects another device to existing RAM Mount • Includes 1” ball connecting to a 1/4”-20 threaded stud with a length of 1.6” • Threads on this ball replace the bolt in any B-size socket arm, and the ball connects to middle of socket arm on the opposite side of the tightening knob NOTE: Socket arm assembly not included. DESCRIPTION PART # RAM spine clip holder w/ 1” ball 0603-0821 RAM SPINE CLIP HOLDER WITH 1” BALL FOR GARMIN® HANDHELD DEVICES • Easily clips into the integrated spine connection on a wide variety of Garmin® devices • 1” rubber ball • B-size diamond base adapter and hardware allow connection to any RAM B-size mounting base DESCRIPTION PART # RAM locking knob 0603-0495 RAM LOCKING KNOB • Replaces the existing knob on the socket arm • Locks the arm firmly in place and gives added security DESCRIPTION PART # RAM pin-lock security knob 0603-0825 RAM PIN-LOCK™ SECURITY KNOB FOR B-SIZE SOCKET ARMS • High-strength composite • Consists of a 1/4”-20 female-threaded security knob and key knob • Replaces all knobs on 1” diameter B-size arms and mounts DESCRIPTION PART # RAM double 1” ball adapter 0603-0496 RAM DOUBLE 1” BALL ADAPTER • Marine-grade aluminum with a 1” rubber ball on each end • Allows the connection of two 1” socket arms • When measured from ball center to ball center, the arm length is 1.75” • Ideal if your mount arm is too short DESCRIPTION PART # RAM GoPRO® camera adapter 0603-0475 GOPRO® CAMERA ADAPTER • High-strength composite construction • Consists of a 1” diameter rubber ball, connected to a custom GoPro® adapter • Rubber ball design dampens shock and vibration, helping to extend the life of your camera • Multiple articulation and adjustment points for perfect viewing angles • Attaches directly to the underside of the camera, replacing the factory mounting bracket • Compatible with GoPro cameras including HD HERO, HD HERO2, HD HERO3 and HD HERO 960 • Mounts to many RAM double-socket arms and mounts (sold separately) NOTE: Camera not included.
RkJQdWJsaXNoZXIy NDI5NTY=