2022 Parts Canada Snow

BOLD MAGENTA part numbers are new for 2022 PARTSCANADA.COM 2022 | SNOW TRACKS 240 TRACK APPLICATION CHART (CONT) FITS MODEL WIDTH (INCHES) LENGTH (INCHES) PITCH (INCHES) YAMAHA (CONT) SX Viper S 04 15 121 2.52 Transporter 600/​800 20-21 15 153 3.00 Transporter Lite 21 15 146 2.86 Venom - see SX Venom above Venture 500,600 & 700 97-01 15 136 2.52 Venture 600 02-06 15 136 2.52 Venture 700 02-04 15 136 2.52 Venture GT 92-93 15 121 2.52 Venture Lite 07-13 15 144 2.52 Venture MP 13-18 16 144 2.52 Venture TR (480) 96-97 15 136 2.52 Venture XL (480) 91-97 15 121 2.52 Venture XL (500) 99-00 15 136 2.52 Venture XL (500 fan) 99-00 15 136 2.52 Viking - see VK below Viper - see SX Viper above VK 540 17-21 20 156 2.52 FITS MODEL WIDTH (INCHES) LENGTH (INCHES) PITCH (INCHES) YAMAHA (CONT) VK 540 II 88-98 20 156 2.52 VK 540 III 99-12 20 156 2.52 VK 540 IV 13-14 (Europe) 20 154 2.86 VK 540 EC 06-12 (Europe & Canada) 20 156 2.52 VK Professional 13-15 (RS Viking Professional,4-stroke) 20 154 2.86 VK Professional 06-13 20 156 2.52 VK Professional II EPS 16-21 20 154 2.86 Vmax 95-01 (inc.XT, XTC,XTC Deluxe,LE & SX) 15 121 2.52 Vmax DX 94 (all) 15 121 2.52 Vmax DX 95-96 (all) 15 136 2.52 Vmax ST 94-95 (all) 15 136 2.52 Vmax Mountain Max 96 15 136 2.52 Vmax-4 92-97 15 121 2.52 Vmax-4 Mountain Max & ST 95-97 15 136 2.52 Vmax-4 ST 94 15 136 2.52 XL-V 85-90 15 121 2.52 DESCRIPTION PART # Track clip tool 3820-0018 DESCRIPTION PART # Insert for 3” lug tracks 3820-0023 SNOWMOBILE TRACK CLIP TOOL AND INSERT FOR 3” LUG TRACKS • A track clip tool that stands up to Woody’s quality and durability; constructed by KB Tooling • Tool can be used while track is still on sled • Only two-piece unit • Top is made of case-hardened 1018 steel • Anvil is made of 6061-T6 tempered aluminum with a hardened steel ball locked in for the bolt to press on • Anvil is locked in by two hardened shoulder bolts; worry-free from falling out or getting cocked • Drive bolt is grade 8 and is designed to fit perfectly on the anvil ball • Base plate is made of 5 / 16 ” hot rolled steel, laser cut, fitted with rubber grips to hold the bolts snug and is cut with clearance for guided track clips • Track clip tool insert PART #3820-0023 (sold separately) makes changing clips on a track with 3” lug height much easier • Made in the U.S.A. 3820-0023 3820-0018 TRACK CLIPS • Top-quality Camso track clips replace OEM track clips and Camso aftermarket tracks • Sold in packs of 10 1240-0022 1240-0044 1240-0242 1240-0243 1240-0244 1240-0245 PART # VENDOR # NOTES A B C D 1240-0022 AFT120106 - 1.00” 1.948” 1.063” 0.625” 1240-0044 AFT120107 - 1.00 1.640”+/-.020” 1.063” - 1240-0242 AFT120112 Replace Camso #012-0092.Fit 1”and 1.5”hole tracks. 1.00” 1.536” 1.063” - 1240-0243 AFT120113 Replace Camso #012-0103.Are AC compatible.Could be used where Camso #012-0067 or #012-0106 are called for.Fit 1”and 1.5”hole tracks. 1.00” 1.948” 1.063” 0.438” 1240-0311 AFT120114 - 1.00” 1.760” 0.438” 1.063” 1240-0298 AFT120116 - 0.595” 1.748”+/- .020” 1.063” 0.438” 1240-0312 AFT120117 - 0.800” 1.640+/- .020” 1.330”+/-.020” - 1240-0314 AFT120118 - 0.625” 1.063” 1.010” 2.300” 1240-0244 AFT5000027 Large guide clips used on flat tracks. 1.496” 1.948” 0.915” .0728” 1240-0313 AFT5000031 - 0.810” 1.500” 0.915” - 1240-0245 AFT5700031 Small flat tab clips used on flat tracks. 0.810” 1.500” 0.915” - DIMENSIONS