2022 Parts Canada Snow

BOLD MAGENTA part numbers are new for 2022 EXHAUST PARTSCANADA.COM SNOW | 2022 297 DESCRIPTION PART # 38mm M7713 57mm M7714 DESCRIPTION PART # 60mm M7715 63mm M7709 DESCRIPTION PART # 67mm M7710 70mm M7716 DESCRIPTION PART # 75mm M7711 80mm M7717 DESCRIPTION PART # 83mm M7712 90mm M7718 DESCRIPTION PART # 100mm M7720 EXHAUST SPRINGS • Stainless steel construction gives superior strength and appearance • Swivel hook design eliminates binding, extending spring life • Sold in pairs • Made in the U.S.A. NOTE: When measuring for exhaust spring length,please use the following points for reference: 1.Exhaust springs should be measured when they are off the vehicle.Wear eye protection when removing. 2.The length measurement should be taken from inside of one hook to the inside of the hook at the opposite end of the spring. 3.For correct fit,an exhaust spring should not be extended more than 20% of its free length. DESCRIPTION PART # Black 1861-0318 Tan 1861-0319 DESCRIPTION PART # Exhaust wrap clamps 1861-0320 HIGH-TEMPERATURE EXHAUST WRAP KITS • Wrap will increase power and reduce radiated exhaust heat • Kit includes 2” x 25’ top-quality high-temperature wrap and four stainless steel tie wraps for that finishing touch • Wrap can withstand up to 2,000°F • Optional 4-pack exhaust wrap clamps are also available 1861-0319 1861-0318 DESCRIPTION PART # Tan M30050 DESCRIPTION PART # Black 1861-0341 EXHAUST WRAP • Fiberglass cloth wrap available in black or tan • Stable at temperatures up to 1,200°F continuous operation and 2,000°F intermittent • Insulates exhaust header pipes to protect you or your machine from intense heat • Generous size roll is enough to wrap one long header or critical areas on multiple exhausts; measures 2” x 50’ • Made in the U.S.A. M30050 1861-0341 DESCRIPTION PART # Exhaust tape M703 EXHAUST TAPE • High-temperature exhaust tape with adhesive • Designed to seal exhaust joints on the muffler when repacking or if needed where the muffler attaches to the head pipe • Max operating temperature is 525°F • Package includes two strips of tape that are 8” L x 1”W x .020” thick • Made in the U.S.A. DESCRIPTION PART # 2”x 36”strip 1861-0153 DESCRIPTION PART # 18”x 18”sheet M30051 HEAT SHIELD • Aluminized heat barrier with adhesive backing • Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat • One 18” x 18” sheet provides 324 square inches of superior heat protection • Also available in a long narrow strip sized 2” x 36” • Made in the U.S.A. 1861-0153 M30051 DESCRIPTION PART # Muffler core sleeve 1860-0474 MUFFLER CORE SLEEVE • Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool • Keeps engine performance and sound levels more consistent compared to packing fiber directly around the core • Available in 19” length that can be easily trimmed with scissors for shorter mufflers • Designed to fit cores from 1.75” to 2.125” • Stainless steel wire is included to secure the wrap in place around the core • Increases intervals between re-packs by three to five times • Works great with the Moose Racing Packing Pillow • Made in the U.S.A. 1860-0474 DESCRIPTION PART # Matrix Heat Shield™ exhaust mat 1861-0816 MATRIX HEAT SHIELD ™ EXHAUST MAT • The Matrix Heat Shield Mat is a unique self-adhesive heat shield with a carbon-fiber finish • Made from crushed volcanic rock; 25% stronger than a typical fiberglass wrap • Weather and chemical resistant • Measures 12” x 24” Detail