2022 Parts Canada Snow

BOLD MAGENTA part numbers are new for 2022 PARTSCANADA.COM 2022 | SNOW ELECTRICAL 346 DESCRIPTION PART # 12V/1.25A 0210128 1 Repl.snap cord,black (has eye connectors) 0810-0696 25’snap cord extension 081-0148-25 1 Not for sale in California or Oregon. BATTERY TENDER ® PLUS • Constantly monitors the battery without the damaging effects of trickle chargers (a trickle charger will eventually boil dry or overcharge a battery) • Battery Tender Plus’ voltage output compensates for temperature changes, providing additional protection • Initial charge brings battery to full charge at approximately 14.6V • After full charge is reached, converts to float charger and monitors battery at 13.2V • Although a constant charge is being applied to the battery, there is little or no current draw (approx. 100A) • Periodic maintenance is recommended, but Battery Tender ® can monitor a battery for years without the fear of boiling or destroying the battery • 12V Battery Tender ® Plus has fused quick-disconnect rings with a weather cover • Optional Battery Tender storage pouch (PART #500-0017X), for safe and easy storage or transportation is available separately; see page 347 NOTE: Earlier model Battery Tenders have a WHITE snap cord connector; later models have a BLACK snap cord connector.These snap cords are NOT interchangeable. DESCRIPTION PART # Two-bank Battery Tender ® charger 3807-0019 TWO-BANK BATTERY TENDER ® CHARGER • Provides 12V/1.25A per channel • Features a four-step microprocessor-controlled fully automatic charge program • Protects against sparks, short circuits and reverse polarity, while also protecting marginal batteries with a 72-hour safety timer • Optional Battery Tender storage pouches, for safe and easy storage or transportation, are available separately; see page 347 for PART #s 3807-0074 or 3807-0075 DESCRIPTION PART # Four-bank Battery Tender ® charging station 022-0148 FOUR-BANK BATTERY TENDER ® CHARGING STATION • This charging station from Deltran will operate anywhere in the world, due to its voltage range of 100V-240V • The four independent charging stations feature 12V/1.25A per station • Also features microprocessor-controlled constant current charging and reverse polarity protection, and it is spark-proof • Perfect for all AGM (Absorbed Glass Mat), gel-cell, sealed maintenance-free and flooded batteries • Complies with all international safety standards: UL/​CSA/CE • Optional Battery Tender ® storage pouches, for safe and easy storage or transportation, are available separately; see page 347 for PART #s 3807-0074 or 3807-0075 DESCRIPTION PART # 10-unit 12V battery charger 3807-0443 10-UNIT BATTERY MANAGEMENT SYSTEM • Charge and/or maintain up to ten 12V batteries simultaneously • Advanced microchip circuitry won’t activate the output until the clips are correctly connected to a battery; clips can be clamped to each other without danger • Keep batteries fully charged for months • The Battery Tender ® at 2A will charge as fast as or faster than any 5A charger on the market DESCRIPTION PART # Replacement lead wire 08101146 BATTERY MANAGEMENT SYSTEM REPLACEMENT LEAD WIRE • Replacement lead wire for PART #s 0210114 and 0210115 only • 6’ standard