BOLD MAGENTApart numbers are new for 2022 PARTSCANADA.COM 2022 | STREET EXHAUST 22 DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. SEE PAGES 6-7 FOR IMPORTANT EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND WARRANTY INFORMATION. FITS MODEL DESCRIPTION PART # APRILIA RSV4 15-20, Tuono V4 17-20 4/2/1 header w/ carbon muffler and carbon cap (must remove passenger pegs to install) 1810-2298 RSV4 21, Tuono V4 21 4-into-1 header w/ carbon muffler and carbon end cap (ECU re-mapping is mandatory; must remove passenger pegs to install) 1810-3050 Optional titanium Track day link pipe/collector w/ resonator (ECU re-mapping is mandatory) 1812-0547 BMW S1000RR 15-18 4/2/1 header w/ titanium muffler and carbon end cap 1810-2278 Optional carbon muffler bracket (must order if passenger pegs are removed) 1861-1025 S1000RR 19-21, M1000RR 20-21, S1000R 21 4/2/1 header w/ titanium muffler and carbon end cap 1810-2898 Optional carbon fiber heat shield 1861-1355 Optional noise insert for PART #1810-2898 1860-1386 HONDA CBR1000RR/ SP/SP2 17-19, CBR1000RR ABS 17-19 4/2/1 header w/ titanium muffler and titanium end cap (ECU re-mapping is required) 1810-2525 Optional carbon muffler bracket (must order if passenger pegs are removed) 1861-1215 CBR1000RR-R Fireblade/ SP 21 4/2/1 header w/ titanium muffler and titanium end cap (ECU re-mapping is required; carbon muffler bracket included if passenger pegs are removed) 1810-2786 Optional stainless Track day link pipe/collector lowers the noise levels for use on racetracks where lower noise levels are required 1812-0484 Optional carbon fiber heat shield 1860-2019 FITS MODEL DESCRIPTION PART # HONDA (CONT) CBR1000RR-R Fireblade SP 21 (for use w/ HRC ECU) 4/2/1 header w/ titanium muffler and titanium end cap 1810-2780 KAWASAKI ZX-10R 16-20, ZX-10RR 17-20,ZX-10R SE 18-20 4/2/1 header w/ carbon muffler and carbon end cap 1810-2366 Optional carbon fiber muffer bracket w/ clamp (must order if passenger footrests are removed) 1861-1083 ZX-10R 21, ZX-10RR 21 4-into-1 header w/ carbon muffler and titanium end cap (ECU re‑mapping is required) 1810-2871 Optional stainless steel link pipe w/ resonator (for mounting w/ muffler/header set from PART #1810-2871; for use on racetracks where lower noise levels are required) 1812-0510 Optional aluminum muffler bracket for PART #1810-2871 1861-1579 SUZUKI GSX-R1000 17-21 4/2/1 header w/ titanium muffler and titanium end cap 1810-2531 YAMAHA YZF-R6 08-21 4/2/1 header w/ titanium muffler and titanium end cap 1810-2520 Optional stainless Track day link pipe/collector w/ resonator (for perfect performance, throttle response and durability ECU re-mapping is recommended) 1812-0543 YZF-R1/R1M 15-21 4/2/1 header w/ titanium muffler and titanium end cap 1810-2757 EVOLUTION LINE COMPLETE EXHAUST SYSTEMS • The flagship of the Akrapovic exhaust systems, used and tested by top factory teams in racing • Each model is unique and dedicated to maximizing engine performance while reducing overall weight for optimized handling of the whole motorcycle • Significantly lighter compared to the stock exhaust system • Headpipes/collector/link pipe are made of titanium • Muffler sleeves constructed from titanium or carbon fiber • End caps constructed from titanium or carbon fiber • Optional/mandatory mounting brackets available separately • Optional stainless Track day link pipe/collector with resonator lowers the noise levels for use on racetracks where lower noise levels are required (sold separately) NOTE: Evolution line kit PART #1810-2780 is aimed exclusively at race riders and racing teams using a HRC Race Kit.This full system is constructed from lightweight titanium alloys,with complex parts cast in the Akrapovic in-house foundry.This race-inspired design,with a relief-imprinted muffler, is exclusively deigned for the machine,and its specific routing and construction meets the demands of racing.Weighing less than 5 kg (11 lb.),the system provides optimum performance through the rev range with perfect throttle control.Its light weight aids handling and on-track behavior.All tailor-made fitments offer a perfect installation between the bike’s engine and the exhaust,all with a standard of finish befitting an Akrapovic system.The R&D department of Honda Motor Corporation recommends the Evolution Line Kit (Titanium) exhaust for the Honda CBR1000RR-R Fireblade with the official HRC Race Kit. 1810-2366 1810-2525 1810-2871 1810-2898
RkJQdWJsaXNoZXIy NDI5NTY=