BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | OFFROAD HANDLEBARS & HAND CONTROLS 114 FINISH PART # Clear anodized 0602-0654 FINISH PART # Black anodized 0602-0657 PRO-OFFSET ELITE BLOCK RISERS • Unique design allows for installation in either direction • 11/4” rise; for use with 7/8” or 11/8” handlebars • 1” offset means bar can be moved closer or farther away, depending on rider preference • Reducers lock into risers to ensure no slippage between components • Rox Pro-Offset risers have an oblong hole that fits virtually any fore and aft bolt center-to-center distance with 8mm bolt threads • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0657 0602-0654 COLOR PART # Black 0602-0296 COLOR PART # Natural aluminum 0602-0439 PIVOTING HANDLEBAR RISERS FOR 7/8” BAR CLAMPS • Incredibly universal, with a two-piece design that allows them to be clamped to almost any motorcycle with 7/8” handlebar clamps • Risers are held by the original clamps and re-clamp the handlebars with pivoting fore and aft adjustment • 2” rise; for use with 7/8” diameter handlebar • Outboard positioning also makes them incredibly durable • Available in black or natural aluminum finish • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0439 0602-0296 DESCRIPTION PART # 2” Deluxe pivoting risers 0602-0656 2”DELUXE RISERS FOR 7/8”HANDLEBARS • Fit most applications with 7/8” handlebars and a 7/8” bar clamp • Sleek, stylish design • Machined from billet 6061-T6 aluminum • Anodized clear finish • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. FINISH PART # 13/4” PIVOTING RISERS FOR BMW F800/850GS , KAWASAKI VERSYS 1000 , KTM 250/300/450/500 EX/EXC AND 690/990/1190/120 ADVENTURE/SUPER ADVENTURE Clear anodized 0602-0438 Black anodized 0602-0658 KTM special edition orange 0602-0909 2” PIVOTING RISERS FOR BMW F800GT, R1200GS THROUGH 12, R NINET, DUCATI HYPERMOTARD, MULTISTRADA 10-20, HONDA AFRICA TWIN, KTM 250/300XC, 350/450 EXC/XC/SXF, 500 EXC/XC, 690 E/R, 990 ADV/BAJA/SUPER ENDURO, 1190 ADV, 1290 SUPER ADV, MOTO GUZZI STELVIO 1200, TRIUMPH TIGER 800 XC/XCS 11-17,TIGER 800 STREET/ROAD 11-17,TIGER 1200 EXPLORER,YAMAHA SUPER TENERE THRU 13 Natural aluminum 0602-0437 Clear anodized 0602-0651 Gray anodized 0602-0652 Black anodized 0602-0653 ROX PIVOTING HANDLEBAR RISERS FOR 11/8” BAR CLAMPS • Very popular addition for the BMW F800GS, KTM 690 Enduro and 990/1190 Adventure • Also fit many other street, off-road and dual sport models with a 11/8” stem clamp and a 11/8” handlebar • Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position • Engineered and tested for maximum strength and durability • CNC-machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks • Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0438 0602-0658 0602-0909 0602-0651 0602-0652
RkJQdWJsaXNoZXIy NDI5NTY=