BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | OFFROAD EXHAUST 48 DISCLAIMER: SEE PAGE 6 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. DESCRIPTION PART # 250-gram bag M702 500-gram bag 1860-0060 DESCRIPTION PART # 750-gram bag 1860-0575 COMPETITION MUFFLER PACKING • The same low-weight, high-quality packing material used in our repack cartridges • Lighter, quieter, and longer lasting than fiberglass mat packing • Resists breakdown up to 1100°F • 250g bag works for most 2-stroke applications • 500g bag repacks most 4-stroke mufflers • Available in 250, 500 and 750 gram bulk packs • Made in the U.S.A. M702 DESCRIPTION PART # Fiberglass muffler packing M701 FIBERGLASS MUFFLER PACKING • Repack blown-out silencers for more power and a quieter ride • Long filament fiberglass made especially for muffler packing • Measures 10.5” x 16”,more than enough to repack virtually any 2-stroke silencer • Resists breakdown up to 1200°F • Made in the U.S.A. DESCRIPTION PART # 15” 1860-0573 DESCRIPTION PART # 19” 1860-0574 MUFFLER PACKING PILLOWS • The latest in muffler packing technology • Available with Competition Muffler Packing • Universal, easy-to-install design • Pillow can be trimmed to length to fit off-road muffler up to 20” long • Lasts 3-5 times longer than traditional packing and extends service to 30-40 engine hours • Competition Pillows resist breakdown up to 1100°F • Comes with cap stuffer to fill packable end-caps • Adhesive closure flap used to eliminate the need to wrap the packing with tape or wire • Available in 15” and 19” • Made in the U.S.A. DESCRIPTION PART # Stainless repack kit 1860-0037 UNIVERSAL STAINLESS REPACK KIT • Louder exhaust does not mean more horsepower • Blown-out packing causes exhaust turbulence and increased back pressure, which reduces horsepower • Repack your silencer with this pro-quality, three-layer packing system and restore the power you’ve blown out • Also great for getting in compliance with new sound laws • Kit contains 1/4” thick 60” x 20” glass mat, 7” x 20” stainless wool, 8” x 20” stainless mesh, twelve 3/16” rivets, and full instructions • Made in the U.S.A. DESCRIPTION PART # Muffler core sleeve 1860-0474 MUFFLER CORE SLEEVE • Two-layer wrap consists of 304 stainless wire cloth and a very durable, high-temp stainless steel wool • Keeps engine performance and sound levels more consistent compared to packing fiber directly around the core • Available in 19” length and can be easily trimmed with scissors for shorter mufflers • Designed to fit cores from 1.75” to 2.125” • Stainless steel wire is included to secure the wrap in place around the core • Increases intervals between repacks by 3 to 5 times • Works great with the Moose Racing Packing Pillow • Made in the U.S.A. DESCRIPTION PART # 2” x 36” strip 1861-0153 DESCRIPTION PART # 18” x 18” sheet M30051 HEAT SHIELDS • Aluminized heat barrier with adhesive backing • Foil-coated fiberglass cloth adheres to body panels to protect plastic or fiberglass from engine or exhaust heat • One 18” x 18” sheet provides 324 square inches of superior heat protection • Also available in a long narrow strip sized 2” x 36” • Made in the U.S.A. 1861-0153 M30051
RkJQdWJsaXNoZXIy NDI5NTY=