WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS &MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 7 282 See FATBOOK For Late Model Applications DISCLAIMER: SEE PAGE 5 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EMISSION CONTROL REGULATION COMPLIANCE AND NOISE REGULATION INFORMATION. PART # DESCRIPTION 0926-2056 For 84-99 Evolution Big Twin SIDEWINDER® .650” VALVE SPRING KIT • Includes springs, upper and lower collars and keys • For valve lift to .650” with 1.860”/178 lbs. installed height, 376 lbs. at max lift • Max 6500 rpm • Made in the U.S.A. PART # DESCRIPTION DS-199729 For 48-84 Big Twin HIGH-LIFT VALVE SPRING KIT • To be used with cams with up to .550” lift • Includes springs and aluminum top retainers • 140-lb. seat pressure • Made in the U.S.A. PART # DESCRIPTION 0930-0237 For 84-99 Evolution Big Twin VALVE SPRING SEAT SHIMS • Set valve spring open height to match camshaft lifts for optimum valve-train stability and performance • Includes four 0.060” thick shims, four 0.030” thick shims and four 0.015” thick shims with 1.500” OD (outside diameter) and 0.645” ID (inside diameter) • Made in the U.S.A. PART # DESCRIPTION 125904 For 84-99 Evolution Big Twin w/ 5/16” dia. valve stems and cams with up to .600” lift BEEHIVE™ VALVE SPRING KIT • Beehive™ Valve Spring Kit designed as drop-in performance valve train upgrade • Beehive valve springs deliver a host of well-documented benefits over conventional cylindrical valve springs • Increased rpm capability with no rocker box clearance problems • Designed to work with the limited valve spring installed height of the Harley V-Twin engine, small spring pocket and high-lift cams • Made in the U.S.A. PART # DESCRIPTION FOR 84-99 EVOLUTION BIG TWIN 0926-1467 7°,5/16” valve stem w/ stock keeper groove (includes steel retainers) 0926-3322 7°,5/16” valve stem w/ stock keeper groove (includes titanium retainers) ECONO BEEHIVE® VALVE SPRING KITS • Made from premium stress-relieved conical ovate wire • Feature extremely high-level of fatigue life • Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion • Designed to handle the demands of performance engines with .585” and smaller lift camshafts • Available for 5/16” valves • PART #0926-1467 includes Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system • PART #0926-3322 includes Econo BeeHive® valve springs, lightweight 7° Ti retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system • Seat lb./installed height; 183 lb. at 1.760” (0.510” lift), 175 lb. at 1.785” (0.535” lift), 172 lb. at 1.803” (0.553” lift), 165 lb. at 1.825” (0.574” lift), 163 lb. at 1.835” (0.585” lift), 380 lb. at 1.250” OPEN HEIGHT coil bind at 1.180” • Dyno proven and track tested • Feuling® BeeHive® valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs • Made in the U.S.A. NOTE: Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to .574” lift for 84-99 Evolution Big Twin. 0926-1467 0926-3322
RkJQdWJsaXNoZXIy NDI5NTY=