BOLD MAGENTA part numbers are new for 2023 RIDER & SLED ACCESSORIES PARTSCANADA.COM SNOW | 2023 149 DESCRIPTION PART # Handlebar rail mount with U-bolt base, Level Cup™ drink holder 0636-0129 RAM HANDLEBAR RAIL MOUNT WITH U-BOLT BASE, LEVEL CUP™ DRINK HOLDER AND KOOZIE • High-strength composite and powdercoated,marine-grade aluminum mount with drink holder designed with two pivot points to keep your drink upright, regardless of conditions • Kit includes a zinc-coated, U-bolt base, double-socket arm and RAM Level Cup™ Self-Leveling Drink Holder with koozie; base includes black cover caps to be placed over exposed ends of U-bolt • Integrated eyelet and hook provide an optional tethering function to help secure any small or open container • U-bolt accommodates rails from 0.5” to 1.25” in diameter • Fits cans, cups,mugs, etc. ranging from 2.5” to 3.5” diameter • 1” rubber B-size ball DESCRIPTION PART # RAM socket arm 0603-0942 RAM SOCKET ARM • High-strength composite • Features a long, preassembled extension pole with 1” and 1.5” ball single open sockets • Socket ends swivel 360°, allowing you to rotate the camera adapter in any direction • Pole length (socket end to socket end) is 18” DESCRIPTION PART # RAM composite double-socket swivel and ratchet arm 0603-0896 RAM COMPOSITE DOUBLE-SOCKET SWIVEL AND RATCHET ARM • High-strength composite, double-socket swivel and ratchet arm features 360° center rotation and 180° swivel joint • Overall length of 6.25” and a socket-to-socket length of 5.5” • Central pivot point provides unsurpassed adjustability for 1” B-size ball bases, device holders and adapter connected via the sockets • Attaches to any B-size RAM ball component DESCRIPTION PART # RAM clutch/brake mount w/ X-Grip® holder 0636-0123 RAM CLUTCH/BRAKE MOUNT KIT WITH X-GRIP® HOLDER • Features hardware for mounting to either brake or clutch reservoirs, rails that are 0.5” to 1.25” in diameter, double-socket arm and universal X-Grip® large phone/phablet holder • Mount features a 1” rubber ball and socket mounting system with adjustment points at both ends of the socket arm • The mounting hardware for brake/c lutch reservoirs includes both standard and metric mounting bolts • Included spring-loaded, X-Grip cradle has a clean and clever four-leg design that provides great holding power without hiding your phone; X-Grip cradle expands and contracts, allowing for a perfect custom fit • X-Grip also includes a device tether recommended for outdoor applications • Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75”with a minimum height of 5.5”; maximum width of 4.5”with a minimum height of 3.25”; depth of 0.875” NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. DESCRIPTION PART # Medium X-Grip® w/ U-bolt base; 1.875”-3.25”W and .5”-1.25” D 0603-0902 Large X-Grip w/ U-bolt base; 1.75”-4.5”W, 3.25”-5.5” H and .875” D 0636-0122 U-bolt base only w/ short arm ( 2.42”) 0603-0900 RAM HANDLEBAR RAIL MOUNTS WITH U-BOLT BASE AND UNIVERSAL X-GRIP® FOR LARGE PHONE/PHABLET CRADLE • Consists of a zinc-coated U-bolt base, double-socket arm and universal spring-loaded X-Grip® IV cradle for large phones and phablets • Package includes hardware that will accommodate rails from 0.50” to 1.25” in diameter • Base comes with black cover caps to place over exposed ends of the U-bolt • Included composite rail adapter narrows the rail to a minimum width of 0.5” • Mount is designed with a RAM B-sized 1” diameter rubber ball and socket system that features adjustment points at both ends of the double-socket arm; allows for almost infinite adjustment and perfect viewing angles • Spring-loaded X-Grip IV cradle expands and contracts, allowing for a perfect custom fit of phone or phablet • X-Grip also includes a device tether recommended for outdoor applications • Cradle is compatible with handheld devices that will fit the following dimensions: minimum width of 1.75”with a minimum height of 5.5”; maximum width of 4.5”with a minimum height of 3.25”; depth of 0.875” • U-Bolt dimensions: 0.50” to 1.25” NOTE: It is important to verify the dimensions of your handheld device with a case/sleeve/skin when determining the overall size. 0636-0122
RkJQdWJsaXNoZXIy NDI5NTY=