BOLD MAGENTA part numbers are new for 2023 PARTSCANADA.COM 2023 | STREET LIGHTING FITS MODEL PART # INDIAN Vintage 21, Roadmaster Elite 20-21, Springfield 16-21, Roadmaster 15-22, Chieftain Classic 18-20, Chief Vintage 15-20, Springfield Dark Horse 18-19, Chief/C hief Classic/Chief Dark Horse 15-19 and Roadmaster Classic 18 models 2050-0319 Scout and Scout Sixty 15-22 models (except Scout Bobber models) 2050-0408 Universal 2050-0156 SMART TRIPLE PLAY® MODULES • Converts rear turn signals to run-brake-turn • Works with LEDs or incandescent bulbs • Ten user-selectable, built-in brake light strobe/flash patterns (user can also select no strobe/flash on brake) • Ten user-selectable running light intensities allow user to match the running light brightness of turns to center taillight • Ability to apply brake strobe/flash patterns on center taillight only, rear turns only, or rear turns and center taillight • Built-in short circuit protection • Sealed, weathertight case • Slim line design: 4.2” L x 1.4”W x 0.6” H DESCRIPTION PART # GLOSS BLACK 37mm 2020-1431 56mm 2020-1288 DESCRIPTION PART # CHROME 37mm 2020-1432 49mm 2020-1287 WRAP-AROUNDS™ LED TURN SIGNALS WITH DAYTIME RUNNING LIGHTS • 6061-T billet aluminum housings in chrome or gloss black finish • 15 super-bright White Daytime Running Light (DRL) LEDs per side • 15 super-bright Amber Turn Signal LEDs per side • Available with smoke lens • Available for: 37mm, 49mm and 56mm forks • Order based on outside diameter of fork tubes • Sold in pairs NOTE: May require load equalizers for proper flash rate. DESCRIPTION LENS PART # 39MM Chrome Smoke 2020-1211 Gloss black Clear 2020-1212 41MM Chrome Clear 2020-1214 DESCRIPTION LENS PART # 43MM Chrome Clear 2020-1218 Gloss black Smoke 2020-1221 AMBER WRAP-AROUNDS™ LED TURN SIGNALS • Each light has 30 super-bright amber LEDs • Clear or smoke lens available • Housings are 6061 billet aluminum with a chrome or gloss black finish • Order based on outside diameter of the fork tubes; see chart • Sold in pairs NOTE: Load equalizer may be required. NOTE: PART #2050-0251 is required on all H-D® BCM models if front turn signals are removed, sold separately (see below) DESCRIPTION PART # Wrap-Arounds™ wire converters 2050-0251 WRAP-AROUNDS™ WIRE CONVERTERS • Converts 2-wire Custom Dynamics Wrap-Arounds™ to 3-wire • Converts wire function to run as both running and turn instead of just turn • Sold in pairs 2050-0156 2050-0319 2050-0408 2020-1288 2020-1431 2020-1432 2020-1212 2020-1214 592
RkJQdWJsaXNoZXIy NDI5NTY=