Alpinestars Fall Intro Collection 2024 ALPINESTARS.COM
2 H E L M E T S ALPINESTARS MOTORCYCLING COLLECTION The S-M10’s design is coherent to Alpinestars philosophy and shares distinctive themes with other products in the portfolio; a smooth, attractive, profile which is streamlined and free of any external channels and features that might act as a load point in an impact, or compromise the overall integrity of the construction. The surface curvature promotes reduced friction on impact, allowing deflection and the most efficient transfer of energy to protect the rider’s head from direct force to the skull and referred to the neck and spinal column. The aperture is designed to accommodate a wide variety of goggles and the air vents in the shell are located to maximize ventilation efficiency. The S-M10 shell has been profiled with performance as a priority and with a design style that identifies the profile of the helmet and its sculpted surface as uniquely ‘Alpinestars’. Another key feature is the S-M10 shell sizeng solution; each helmet fit size has its own appropriate shell size to deliver the most anatomical solution for the wide variety of fit needs worldwide. The helmet’s shell construction utilizes a highly advanced molding technology with a multi-composite combination:. - 3K Carbon, high density carbon outer layer that improves strength and efficiency of energy dissipation over the shell Uni-directional carbon composite layer that gives significantly greater radial strength around the shell, preventing compression but allowing controlled deflection for reducing transmitted impact energy. Aramid fiber layer which provides critical penetration protection. This combination of layers is given even greater performance with an epoxy resin bonding that offers the best possible strength and energy management; limited outer shell deflection means the energy spreads wider and is better absorbed by the EPS liner. The result of the unique shell lay-up process employed in the S-M10 construction results in extremely effective impact protection. With a fully equipped helmet testing facility, within Alpinestars Racing Development Center, an exhaustive impact research program has resulted in the Supertech M10 returning linear and oblique impact performance which far improves upon current helmet regulation standard limits. For direct, linear, impact by an average magnitude of 41% and for rotational acceleration, oblique, impact performance by an average of 48%. ECE R 22.06 approved 24
H E L M E T S 3 ALPINESTARS MOTORCYCLING COLLECTION SUPERTECH M10 SOLID CARBON HELMET SUPERTECH M10 FLOOD HELMET 0110-8338 0110-8339 0110-8340 0110-8341 0110-8453 0110-8454 0110-8455 0110-8456 0110-8644 0110-8645 0110-8646 0110-8647 0110-8365 0110-8366 0110-8367 0110-8368 BLACK B - BLACK DARK GREY A - SILVER BLACK ORANGE C - RED S M L XL S M L XL SIZE SIZE PRICE: 849.95 SIZE: S - XL PRICE: 929.95 SIZE: S - XL A B C
4 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION SIZE A - WHITE DARK NAVY LIGHT BLUE B - LAVAN PURPLE BLACK C - MARS RED BURGUNDY D - YELLOW FLUO BLUE NIGHT NAVY E - LIGHT GREY HOT ORANGE BLACK 28 2901-11244 2901-11251 2901-11258 2901-11265 2901-11272 30 2901-11245 2901-11252 2901-11259 2901-11266 2901-11273 32 2901-11246 2901-11253 2901-11260 2901-11267 2901-11274 34 2901-11247 2901-11254 2901-11261 2901-11268 2901-11275 36 2901-11248 2901-11255 2901-11262 2901-11269 2901-11276 38 2901-11249 2901-11256 2901-11263 2901-11270 2901-11277 A B D C E + Advanced, highly resistant 600D poly-fabric main chassis construction is PU coated for strength with a technical yarn for enhanced durability + Micro rip-stop stretch fabric panels on crotch, knees and rear waist for enhanced rider comfort + 3D pattern, pre-curved ergonomic construction for additional rider comfort and superior freedom of movement + Large rear stretch panel insert provides increased comfort and flexibility to the waist and lower back + Extensive lightweight and ventilated mesh with stretch panel inserts for an optimized fit + Mesh lining for superior comfort + Leather-reinforced inner-leg panels for enhanced heat resistance, grip and comfort + Ratchet closure with waist adjustment straps for a secure, personalized fit + Gripper internal waist elastic band helps keep garment in position + Convenient interior hip pocket for key/coin storage + Please see size chart on pages 74-76 before ordering PRICE: 189.95 SIZE: 28 - 38 RACER HOEN 2024
O F F R O A D 5 ALPINESTARS MOTORCYCLING COLLECTION + Advanced poly-fabric construction is lightweight, moisture-wicking and durable, with a mechanical stretch feature for rider comfort + Stretch collar and wrist cuff neck construction for fit and comfort + Cut longer in the rear for greater coverage when riding + Fitted wrist cuffs for an optimized fit + Fade-resistant sublimated graphics + Please see size chart on pages 74-76 before ordering SIZE A - WHITE DARK NAVY LIGHT BLUE B - LAVAN PURPLE BLACK C - MARS RED BURGUNDY D - YELLOW FLUO BLUE NIGHT NAVY E - LIGHT GREY HOT ORANGE BLACK S 2910-7776 2910-7781 2910-7786 2910-7791 2910-7796 M 2910-7777 2910-7782 2910-7787 2910-7792 2910-7797 L 2910-7778 2910-7783 2910-7788 2910-7793 2910-7798 XL 2910-7779 2910-7784 2910-7789 2910-7794 2910-7799 2X 2910-7780 2910-7785 2910-7790 2910-7795 2910-7800 E A C B D PRICE: 64.95 SIZE: S - 2XL RACER HOEN 2024
6 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION SIZE A - BLACK YELLOW FLUO B - MARS RED WHITE C - MUD BLACK 28 2901-11302 2901-11309 2901-11330 30 2901-11303 2901-11310 2901-11331 32 2901-11304 2901-11311 2901-11332 34 2901-11305 2901-11312 2901-11333 36 2901-11306 2901-11313 2901-11334 38 2901-11307 2901-11314 2901-11335 40 2901-11308 2901-11315 2901-11336 B C A + Offers optimized levels of comfort and performance in the riding position + 600D poly-fabric main chassis construction that is PU-coated for strength with a technical yearn for durability + Stretch fabric panels on crotch, knees and rear waist for enhanced rider comfort + 3D pattern construction for additional rider comfort and unparalled freedom of movement + High-performance synthetic leather on knee for heat resistance, grip and comfort + Ratchet closure for a secure, personalized fit + Comfort mesh lining for superior breathability + Available in men’s sizes 28-40; please see size chart on pages 74-76 before ordering PRICE: 149.95 SIZE: 28 - 40 FLUID LURV
O F F R O A D 7 ALPINESTARS MOTORCYCLING COLLECTION SIZE A - BLACK YELLOW FLUO B - MARS RED WHITE C - MUD BLACK S 2910-7821 2910-7826 2910-7841 M 2910-7822 2910-7827 2910-7842 L 2910-7823 2910-7828 2910-7843 XL 2910-7824 2910-7829 2910-7844 2X 2910-7825 2910-7830 2910-7845 B C A + Advanced 180g poly-fabric construction is lightweight, moisture-wicking and durable + Cut longer in the rear area for greater coverage when riding + Sport collar neck construction for superior rider comfort + Compatible with Alpinestars MX pants + Available in men’s sizes S-2X; please see size chart on pages 74-76 before ordering PRICE: 49.95 SIZE: S - 2XL FLUID LURV
8 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION + Offers optimized levels of comfort and performance in the riding position + 600D poly-fabric main chassis construction that is PU-coated for strength with a technical yearn for durability + Stretch fabric panels on crotch, knees and rear waist for enhanced rider comfort + 3D pattern construction for additional rider comfort and unparalled freedom of movement + High-performance synthetic leather on knee for heat resistance, grip and comfort + Ratchet closure for a secure, personalized fit + Comfort mesh lining for superior breathability + Available in men’s sizes 28-40; please see size chart on pages 74-76 before ordering + Advanced 180g poly-fabric construction is lightweight, moisture-wicking and durable + Cut longer in the rear area for greater coverage when riding + Sport collar neck construction for superior rider comfort + Compatible with Alpinestars MX pants + Available in men’s sizes S-2X; please see size chart on pages 74-76 before ordering SIZE BLACK SILVER S 2910-7866 M 2910-7867 L 2910-7868 XL 2910-7869 2XL 2910-7870 3XL 2910-7871 SIZE BLACK SILVER 28 2901-11365 30 2901-11366 32 2901-11367 34 2901-11368 36 2901-11369 38 2901-11370 40 2901-11371 42 2901-11372 44 2901-11373 PANTS JERSEYS PRICE: PANTS: 149.95 // JERSEYS: 49.95 SIZE: PANTS: 28 - 44 // JERSEYS: S - 3XL FLUID GRAPHITE
O F F R O A D 9 ALPINESTARS MOTORCYCLING COLLECTION B C A SIZE A - BLACK WHITE B - BLUE RAY WHITE C- BLUE RAM HOT ORANGE S 2910-7846 2910-7856 2910-7861 M 2910-7847 2910-7857 2910-7862 L 2910-7848 2910-7858 2910-7863 XL 2910-7849 2910-7859 2910-7864 2X 2910-7850 2910-7860 2910-7865 SIZE A - BLACK WHITE B - BLUE RAY WHITE C- BLUE RAM HOT ORANGE 28 2901-11337 2901-11351 2901-11358 30 2901-11338 2901-11352 2901-11359 32 2901-11339 2901-11353 2901-11360 34 2901-11340 2901-11354 2901-11361 36 2901-11341 2901-11355 2901-11362 38 2901-11342 2901-11356 2901-11363 40 2901-11343 2901-11357 2901-11364 PANTS JERSEYS PRICE: PANTS: 149.95 // JERSEYS: 49.95 SIZE: PANTS: 28 - 40 // JERSEYS: S - 2XL FLUID LUCENT
10 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION SIZE A - BLACK WHITE B - WHITE TURQUOISE PANTS 26 2902-0363 2902-0368 28 2902-0364 2902-0369 30 2902-0365 2902-0370 32 2902-0366 2902-0371 34 2902-0367 2902-0372 JERSEYS XS 2911-0300 2911-0305 S 2911-0301 2911-0306 M 2911-0302 2911-0307 L 2911-0303 2911-0308 XL 2911-0304 2911-0309 + Optimized for a women's performance fit + Advanced poly-fabric construction is lightweight, moisture-wicking and durable + Cut longer in the rear area for greater coverage when riding + Sport collar neck construction for superior comfort + Compatible with Alpinestars MX pants + Please see size chart on pages 74-76 before ordering + Optimized for a women's performance fit + Offers optimized levels of comfort and performance in the riding position + 600D poly-fabric main chassis construction that is PU-coated for strength with a technical yearn for durability + Stretch fabric panels on crotch, knees and rear waist for enhanced rider comfort + 3D pattern construction for additional rider comfort and unparalleled freedom of movement + High-performance synthetic leather on knee area for heat resistance, grip and comfort + Ratchet closure for a secure, personalized fit + Comfort mesh lining for superior breathability + Please see size chart on pages 74-76 before ordering A B PRICE: PANTS: 149.95 // JERSEYS: 49.95 SIZE: PANTS: 28 - 34 // JERSEYS: XS - XL STELLA FLUID JERSEYS PANTS
O F F R O A D 11 ALPINESTARS MOTORCYCLING COLLECTION YOUTH RACER JERSEY + Specially designed and developed for an optimized youth fit + Poly-fabric construction is lightweight, moisture-wicking and durable + Cut longer in the rear area for compatibility with Alpinestars’ MX pants + Stretch collar neck construction for fit and comfort + Fade-resistant sublimated graphics + Fitted wrist cuff + Please see size chart on pages 74-76 before ordering YOUTH RACER PANTS 2024 + Advanced highly resistant 600D poly-fabric main chassis construction is PU coated for strength with a technical yarn for durability + Micro rip-stop stretch fabric panels on crotch, knees and rear waist for enhanced rider comfort + 3D pattern, pre-curved ergonomic construction for additional rider comfort and superior freedom of movement + Large rear stretch panel insert provides increased comfort and flexibility to the waist and lower back + Extensive lightweight and ventilated mesh with stretch panel inserts for an optimized fit + Mesh lining for superior comfort Leather reinforced inner-leg panels for enhanced heat resistance, grip and comfort + Ratchet closure with waist adjustment straps for a secure, personalized fit + Gripper internal waist elastic band helps keep garment in position + Convenient interior hip pocket for key/coin storage + Please see size chart on pages 74-76 before ordering SIZE BLACK WHITE PANTS 22 2903-2453 24 2903-2454 26 2903-2455 28 2903-2456 JERSEYS S 2912-2434 M 2912-2435 L 2912-2436 XL 2912-2437 PRICE: PANTS: 129.95 // JERSEYS: 46.95 SIZE: PANTS: 22 - 28 // JERSEYS: S - XL YOUTH RACER LUCENT
12 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION SIZE A - BLACK YELLOW FLUO B - MARS RED WHITE PANTS 22 2903-2461 2903-2465 24 2903-2462 2903-2466 26 2903-2463 2903-2467 28 2903-2464 2903-2468 JERSEY S 2912-2442 2912-2446 M 2912-2443 2912-2447 L 2912-2444 2912-2448 XL 2912-2445 2912-2449 A B PRICE: PANTS: 129.95 // JERSEYS: 46.95 SIZE: PANTS: 22 - 28 // JERSEYS: S - XL YOUTH RACER LURV
O F F R O A D 13 ALPINESTARS MOTORCYCLING COLLECTION A B SIZE YELLOW FLUO BLUE NIGHT NAVY LIGHT GREY HOT ORANGE BLACK PANTS 22 2903-2477 2903-2481 24 2903-2478 2903-2482 26 2903-2479 2903-2483 28 2903-2480 2903-2484 JERSEYS S 2912-2458 2912-2462 M 2912-2459 2912-2463 L 2912-2460 2912-2464 XL 2912-2461 2912-2465 PRICE: PANTS: 129.95 // JERSEYS: 46.95 SIZE: PANTS: 22 - 28 // JERSEYS: S - XL YOUTH RACER HOEN
14 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION + Lightweight and with excellent comfort features, Alpinestars’ Radar Glove incorporates a single-piece stretch fabric upper and synthetic suede palm reinforcements for high levels of comfort and improved feeling with the bike’s controls. + Performance construction with a single layer palm and stretchable single layer top for optimized fit and feel + Rolling palm fingertips on external fingers for additional durability. + Localized palm perforations palm for enhanced breathability. + Strap closure for security. + Synthetic suede palm for high levels of durability. + Thumb patch reinforcement for enhanced durability. + Puller for quick and easy entry into the glove. + Stretch fourchettes for increased flexibility. + Sublimated graphic on backhand. SIZE A - BLACK B - BLACK WHITE C - MARS RED SILVER D - NIGHT NAVY WHITE E - MAGNET SILVER S 3330-7712 3330-7717 3330-7722 3330-7742 3330-7747 M 3330-7713 3330-7718 3330-7723 3330-7743 3330-7748 L 3330-7714 3330-7719 3330-7724 3330-7744 3330-7749 XL 3330-7715 3330-7720 3330-7725 3330-7745 3330-7750 2X 3330-7716 3330-7721 3330-7726 3330-7746 3330-7751 A B D C E PRICE: 44.95 SIZE: S - 2XL RADAR GLOVES 2024
O F F R O A D 15 ALPINESTARS MOTORCYCLING COLLECTION + Ergonomic padded palm for optimal comfort on the handlebar/ grips for long riding sessions + Neoprene and TPR on the knuckle area offers enhanced protection against impacts and possible branches/rock strikes when trail riding while also being supremely flexible for comfort + Upper constructed from a breathable stretch fabric for comfort and fit + Silicon print on fingertips for optimized grip with the bike’s controls + Stretch fourchettes for optimal levels of comfort and flexibility + Reinforced thumb patches for durability and abrasion resistance + Stretch cuff for an optimized fit with a strap closure + Ergonomic padded palm for optimal comfort on the handlebar/grips for long riding sessions + Neoprene and TPR on the knuckle area offers enhanced protection against impacts and possible branches/rock strikes when trail riding while also being supremely flexible for comfort + Upper constructed from a breathable stretch fabric for comfort and fit + Silicon print on fingertips for optimized grip with the bike’s controls + Stretch fourchettes for optimal levels of comfort and flexibility + Reinforced thumb patches for durability and abrasion resistance + Stretch cuff for an optimized fit with a strap closure + Performance construction with a single layer palm and stretchable single layer top for optimized fit and feel. + Rolling backhand and index finger for additional protection in a key area. + Localized palm perforations palm for enhanced breathability. + Strap closure for security. + Synthetic suede palm for high levels of durability. + Thumb patch reinforcement for enhanced durability. + Puller for quick and easy entry into the glove. + Stretch fourchettes for increased flexibility. + Sublimated graphic on backhand. SIZE BLACK S 3330-6988 M 3330-6989 L 3330-6990 XL 3330-6991 SIZE BLACK 3XS 3332-1861 2XS 3332-1816 XS 3332-1817 S 3332-1818 M 3332-1819 L 3332-1820 PRICE: 42.95 SIZE: S - 2XL PRICE: 42.95 SIZE: S - XL PRICE: 34.95 SIZE: 3XS - L FULL BORE GLOVES 2024 STELLA FULL BORE YOUTH RADAR GLOVES 2024 SIZE (A) BLACK S 3330-6935 M 3330-6936 L 3330-6937 XL 3330-6938 2X 3330-6939
16 P R O T E C T I O N ALPINESTARS MOTORCYCLING COLLECTION + The Bionic Tech V3 Protection Jacket features ultra-lightweight, detachable floating Level 2 CE and UKCA Certified Polyhedron Hybrid Technology chest and back protectors and Level 2 Nucleon Flex Pro shoulder and elbow protectors embedded in a highly breathable, race-proven stretch mesh base layer, to offer riders unsurpassed levels of ventilation and superior upper body protection against impacts. + Both the dual-zone chest and back protectors have a rigid central zone with a flexible soft compound around the perimeter and are backed by a soft biofoam padding. On the chest protector, the flexible soft surround and the bio-foam padding works as an adaptive system that molds to the chest. The central zone of the chest and back protectors directly behind the highly perforated impact grid are completely open to allow for maximum ventilation. + The chest and back protectors are securely held in place via adjustable shoulder straps. For ease of putting on and off, the removable chest protector features a quick release-lock magnetic buckle on the left shoulder while the lower securement is actioned via the adjustable V-belts which run through the ventilated rib guards. The V shape spreads the tightening force over a wider area of the back protector, resulting in a more secure and comfortable fit. The rib guards offer additional coverage in critical areas. + SHOULDER PROTECTORS: EN 1621-1:2012 Level 2 + ELBOW PROTECTORS: EN 1621-1:2012 Level 2 + BACK PROTECTOR: EN 1621-2:2014 Level 2 + CHEST PROTECTOR: EN 1621-3:2018 Level 2 + Lightest CE Level 2 Chest Protector in its class. + 17% of the protector structure consists of ventilation apertures aligned through both hybrid layers to ensure maximum ventilation. + Super ventilated with channeling of direct heat build-up away from the chest. + Anatomically profiled back protector is highly ventilated and flexible. + BNS compatible via removable puck panel and elasticated BNS pull tabs. + Chest and back protectors can be detached from the base layer for easy washing of the jacket. + Chest can be opened on the left shoulder by a convenient quickrelease magnetic buckle providing easy access to the central zipper. + V-straps on the lower forearm for ensure a customizable fit while keeping the elbow protector securely positioned. + V-straps on the back protector make for a more adaptive fit. + Strategically placed EVA foam padding on the upper arms and chest provide improved roost defense. + Race-proven breathable and stretchable textiles used for the base layer construction. + Floating Chest and Back protectors, and rib guards. + Waist strap not attached to back protector. BIONIC TECH V3 PROTECTION JACKET 2701-1266 2701-1267 2701-1268 2701-1269 2701-1270 BLACK WHITE RED S M L XL 2XL SZ PRICE: 399.95 SIZE: S - 2XL
P R O T E C T I O N 17 ALPINESTARS MOTORCYCLING COLLECTION + The Bionic Action Youth Chest Protector is an ultra-lightweight protective system offering excellent Level 1 CE/UKCA certified upper body impact protection. The chest protector features Cell Technology chest and back protectors and Level 1 CE/UKCA certified Nucleon Flex Plus shoulder protectors. Designed specifically for youth riders to offer optimum ventilation and lightweight. + Mounted on breathable padding, the open grid structure of the chest and back protectors is engineered to be both ultra-lightweight and ultra-breathable, while still guaranteeing unrivalled protective performance. The chest and back protectors are securely held in place via adjustable shoulder straps while lower securement is actioned via the easy-connect buckles and elastic side straps. + The removable shoulder protectors are mounted on a soft-touch foam padding and are attached to the main chassis with hook and loop patches. The elastic upper arm adjustment straps keep the shoulder protectors securely in place. + YNS compatibility is achieved by removing the EVA back puck panel and engaging the elasticated YNS pull tabs. + SHOULDER PROTECTORS: EN 1621-1:2012 Level 1 + BACK PROTECTOR: EN 1621-2:2014 Level 1 + CHEST PROTECTOR: EN 1621-3:2018 Level 1 + All-new Cell Technology chest protector features a highly perforated shell for high levels of ventilation and protection. + The flexible side wings of the chest protector adapt to the rider’s body shape. + Features a new Cell Technology back protector with a flexion channel for enhanced mobility. + Extended padding offers more protection against tire roost without obstructing arm movement. + The protectors are perforated for maximum breathability and cooling ventilation. + Elastic closure system features newly designed, quick and easy-to-use buckles that fit a broad range of rider body sizes. + Padded chassis for optimized levels of comfort and a close-to-body fit. + Adjustable shoulder straps for an optimal fit. + YNS compatibility with removable back puck and YNS pull tabs. 2701-1262 2701-1263 BLACK RED S/M L/XL SZ PRICE: 139.95 SIZE: S/M - L/XL BIONIC ACTION YOUTH CHEST PROTECTOR
18 P R O T E C T I O N ALPINESTARS MOTORCYCLING COLLECTION 2701-1264 2701-1265 BLACK RED 4/6 7/9 SZ + Alpinestars’ Kickstart line is dedicated to the young champions of the future, designed for kids aged 4-9 years old. Protective, lightweight, and adaptive, the Kids Bionic Kickstart Chest, back, and shoulder Guards features semi-rigid TPR guards on the back and chest, plus shoulder cups with floating bicep guards, providing the widest coverage on the market. + The semi-floating chest guard has an adaptive V-shaped base construction that adapts to chest volume and movement, and really improves the comfort and fit for kids of different sizes. The Bionic Kickstart Chest Guard incorporates a large, full-length hook and loop closure straps that offer a wide range of elasticated adjustment on the chest and on the biceps. A wide-opening, padded comfort collar provides premium comfort and ease of donning to young riders. + Wide comfort collar for easy on/easy off. + Lightweight and vented construction. + Floating shoulder cups and bicep guards. + Wide TPR semi-floating chest guard. + V-shaped base construction below chest guard for adaptability. + Wide range elasticated adjustment at waist and biceps. + Full length adjustable stretch closure. BIONIC ACTION KICKSTART CHEST GUARD PRICE: 69.95 SIZE: 4/6 YEARS / 7/9 YEARS
P R O T E C T I O N 19 ALPINESTARS MOTORCYCLING COLLECTION 2704-0686 BLACK RED OS SZ + Alpinestars’ Kickstart line is dedicated to the young champions of the future, designed for kids aged 4-9 years old. The Bionic Kickstart Knee Guards feature a lightweight and protective articulated knee and shin guard, plus a double strap elasticated closure. The Kids Bionic Kickstart knee guards offers a full range of adjustment as the rider grows. + Articulated knee and shin construction. + Double elasticated closure. + Full range adjustment. BIONIC ACTION KICKSTART KNEE GUARD PRICE: 28.95 SIZE: ONE SIZE 2706-0342 2706-0343 BLACK RED 4/6 7/9 SZ + Alpinestars’ Kickstart line is dedicated to the young champions of the future, designed for kids aged 4-9 years old. The Kids Bionic Kickstart Elbow Guards are protective, lightweight, and soft, featuring a flexible construction with an elasticated double strap elasticated closure that provides a full range of adjustment as the rider grows. + Flexible construction. + Double elasticated closure. + Full range adjustment. BIONIC ACTION KICKSTART ELBOW GUARD PRICE: 21.95 SIZE: 4/6 YEARS / 7/9 YEARS
20 P R O T E C T I O N ALPINESTARS MOTORCYCLING COLLECTION + CE-certified against EN 1621-1:2012 (Level 1) + Lightweight hybrid knee protection with high comfort and maximum breathability + Shell is constructed from a highperformance polymeric material blend for optimal flexibility and light weight + Shell is highly perforated for maximum air ventilation + Single-injected compound shells constructed with a back-integrated grip structure that absorbs and dissipates impact forces + Soft bridge connector on the middle of the shell for flexibility and adaptation + Internal rounded thermoformed padding with additional viscoelastic foam for a perfect fit and better protection of the rotula + Dual strap closure system designed to offer more comfort and adjustment with the top strap mounted above the knee and lower strap position for an ergonomic fit + Abrasion-resistant microfiber on the bike side (inner side part) + Soft, impact-absorbing padding on the side outer part for more protection + Technical elastane main construction is highly breathable and maintains shape + Sold each SEQUENCE KNEE PROTECTORS SEQUENCE ELBOW PROTECTORS PRICE: 109.95 SIZE: S - 2XL PRICE: 89.95 SIZE: S - 2XL SIZE BLACK S/M 2704-0452 L/XL 2704-0453 2X 2704-0454 SIZE BLACK/RED S/M 2706-0183 L/XL 2706-0184 2X 2706-0185 + Lightweight hybrid elbow protection with high comfort and maximum breathability for all riding styles + Shell is constructed from a highperformance polymeric material blend for optimized flexibility and weight-saving properties + Single-injected shells are constructed with a back-integrated grid structure which absorbs and dissipates impact forces + Shell is highly perforated for maximum breathability and air ventilation + Soft protective structure on the upper arm and soft bridge connectors on the middle of the shell to allow flexibility and adaptation + Internal rounded thermoformed padding with an additional perforated viscoelastic foam for a perfect fit and positioning and better protection of the olecranon bone + Dual strap closure system specifically designed to offer more comfort and adjustment + Technical elastane main construction is highly breathable and retains shape + CE-certified against EN 1621-1:2012 (Level 1) + Sold each
PERFECT I ON THROUGH I NNOVAT I ON BOOT 10 ALPINESTARS MOTORCYCLING COLLECTION 21
22 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. + Construction uses a highly breathable, perforated microfiber. + TPU features is combined with ventilation zones and a new air flow system sole for breathability and superior ventilation. + Evolutionary new shin plate design with ventilation windows strategically positioned to allow more ventilation without compromising the impact protection. + Air vents on the TPU lateral calf plus breathable mesh insert improve comfort and reduce fatigue on short and long rides. + New performance double pivot motion control system features: + Medial and lateral double pivot system for improved levels of flexibility and precision control. + Engineered bi-density front flexion control is strategically positioned over the mesh area, combined with a dual front blade system and shock absorber insert to offer mechanical progressive force release to dampen and absorb impact energies. + Re-designed dual density TPU rear blade system is engineered to prevent hyper-extension while offering improved flex control and impact resistance. + Built into the Tech 10’s unique and lightweight single-piDOT / ECE co-injected foot chassis is the patented Dynamic Heel Compression Protector (DHCP), an innovative safety feature which includes a fully integrated collapsible heel area with expanded polyfoam to absorb high impact energies during a crash. + DCHP features a directional impact protection system which significantly reduces the effect of excessive, potentially injury-causing energy being transferred to the ankle and lower leg. + DHCP has been developed and tested in the demanding circuits of professional Supercross and Motocross. + Co-injected for strength and structure, the exclusive TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance. + The contoured calf protector ergonomically wraps around the rear leg and is constructed from a dual density compound rear blade system to offer progressive dampening of excessive torsional forces. + Shin plate features a new anatomic design for reduced surface area and weight-saving. + Completely re-designed sole with proprietary grip sculpturing to improve foot-peg performance, grip and mud and water run-off. + Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. The sole offers superior durability, grip and feel while riding, and improved performance on the shifter. + The central sole insert features a micro grip and side hooking grip design. It is easily replaceable and Alpinestars offers a full sole replacement and boot repair service. + Anatomically optimized for weight-saving and ergonomics, the new mechanical buckle closure system features a nylon and fiberglass compound for improved durability and strength. + The new slim-line buckle closure system includes high-impact bridge closures which are cold forged for precision and strength. + The buckle closure system features a memory and a quick release/locking system with self-aligning design for easy, precise closure and improved riding performance and security. All buckles are easily replaceable. + Innovative, lightweight upper combines advanced lightweight microfiber with an impact and abrasion resistant TPU shell. + The foot shell features five different compounds in a single lightweight piDOT / ECE to offer strength while maintaining flexibility and structural integrity. + The foot shell incorporates heel and toe protection and is highly resistant against abrasion and impact while adding to the boot’s overall durability. + The foot shell also includes an integrated shank for support and structural integrity. + Frontal protection features a dual closure system with an internal microfiber flap, plus hook and loop fasteners for a precise fit closure attached securely with a microadjustable, easy to operate, lightweight buckle. + The shin incorporates a unique TPU blade system engineered to prevent frontal hyperextension and offer greater flex control. + Soft microfiber gaiter helps seal out excessive water and dirt entry, while the 3D mesh lining ensures improved air circulation and comfort. + 3D mesh lining incorporates anti-sliding suede on heel area to keep the foot located inside the boot. + Highly ventilated perforated padding for optimized ventilation and airflow. TECH 10 SUPERVENTED BOOT PRICE: $ 899.95/ $ 929.95 SIZE: 8 - 13
O F F R O A D 23 ALPINESTARS MOTORCYCLING COLLECTION SIZE A - WHITE B - BLACK C - NIGHT NAVY WHITE RAINBOW D - BLACK ENAMEL BLUE PURPLE WHITE E - WHITE BRIGHT RED 8 3410-2303 — — — — 9 3410-2304 3410-2645 3410-3009 3410-2785 3410-2793 10 3410-2305 3410-2646 3410-3010 3410-2786 3410-2794 11 3410-2306 3410-2647 3410-3011 3410-2787 3410-2795 12 3410-2307 3410-2648 3410-3012 3410-2788 3410-2796 13 3410-2308 3410-2649 — — — TECH 10 SUPERVENTED BOOT CONT’D A C B D E
24 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION TECH 10 BOOT + Performance double pivot motion control system features: + Medial and lateral double pivot system for improved levels of flexibility and precision control. + Engineered front flexion control offered by a dual front blade system plus shock absorber insert to offer mechanical progressive force release which dampens and absorbs impact energies. + Redesigned dual density TPU rear blade system engineered to prevent hyperextension while offering improved flex control and impact resistance. + Built into the Tech 10’s unique and lightweight single-piece co-injected foot chassis is the patented Dynamic Heel Compression Protector (DHCP), an innovative safety feature which includes a fully integrated collapsible heel area with expanded poly-foam to absorb high impact energies during a crash. DCHP features a directional impact protection system which significantly reduces the effect of excessive, potentially injury-causing energy being transferred to the ankle and lower leg. DHCP has been developed and tested in the demanding circuits of professional Supercross and Motocross. + Co-injected for strength and structure exclusive TPU and rubber compound panels provide superb levels of grip contact, durability and heat resistance. Innovative material construction ensures panels are lighter, anatomically profiled and reduced in thickness. + The contoured calf protector ergonomically wraps around rear leg and is constructed from a dual density compound rear blade system to offer progressive dampening of excessive torsional forces. + Shin plate features an anatomic design for reduced surface area and weight-saving. + Completely redesigned sole with proprietary grip sculpturing to improve foot-peg performance, grip and mud and water run-off. Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support. The sole offers superior durability, grip and feel while riding and improved performance on shifter. The central sole insert features micro grip and side hooking grip design. It is easily replaceable and Alpinestars offers a full sole replacement and boot repair service. + Anatomically optimized redesigned for weight-saving and ergonomics mechanical buckle closure system feature a nylon and fiberglass compound for improved durability and strength. Slim-line buckle closure system includes high-impact bridge closures which are cold forged for precision and strength. The buckle closure system features a memory and a quick release/locking system with selfaligning design for easy, precise closure and improved riding performance and security. All buckles are easily replaceable. + Innovative, lightweight upper combines advanced lightweight microfiber and impact and abrasion resistant TPU shell. + Footshell features five different compounds in a single lightweight piece to offer strength while maintaining flexibility and structural integrity. Foot shell incorporates heel and toe protection is highly resistant to abrasion and impact, and adds to the boot’s overall durability. Foot shell also includes integrated shank for support and structural integrity. + Frontal protection features a dual closure system with an internal microfiber flap, plus hook and loop fasteners for a precise fit closure attached securely with a micro-adjustable, easy to operate, lightweight buckle. Shin incorporates a unique TPU blade system engineered to prevent frontal hyperextension and offer greater flex control. + Soft microfiber gaiter helps seal out excessive water and dirt entry. + Poly-fabric lining with 3D open cell foam incorporates anti-sliding suede on heel area to keep foot located inside the boot. + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. PRICE: $ 849.95/ $ 879.95 SIZE: 7 - 13 9 10 11 12 SZ 3410-2993 3410-2994 3410-2995 3410-2996 ULTRAVIOLET BLACK
O F F R O A D 25 ALPINESTARS MOTORCYCLING COLLECTION SIZE A - BLACK/ WHITE B - BLACK RED C - BLACK D - WHITE E - RED G - BLACK RED FLUO F - BLACK RED FLUO ORANGE FLUO WHITE H - BLUE BLACK I - YELLOW FLUO BLACK 7 - - 3410-2522 3410-2530 - - - - - 8 3410-2451 - 3410-2523 3410-2531 - - - - - 9 3410-2452 3410-2476 3410-2524 3410-2532 3410-2637 3410-2761 3410-2769 3410-2777 3410-3001 10 3410-2453 3410-2477 3410-2525 3410-2533 3410-2638 3410-2762 3410-2770 3410-2778 3410-3002 11 3410-2454 3410-2478 3410-2526 3410-2534 3410-2639 3410-2763 3410-2771 3410-2779 3410-3003 12 3410-2455 3410-2479 3410-2527 3410-2535 3410-2640 3410-2764 3410-2772 3410-2780 3410-3004 13 - - 3410-2528 3410-2536 - - - - - TECH 10 BOOT CONT’D A B F C G D H E I
26 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION ACUMEN VISION DAYTONA SQUAD LASER 8 3410-2754 3410-2877 3410-2887 3410-2882 – 9 3410-2755 3410-2878 3410-2888 3410-2883 – 10 3410-2756 3410-2879 3410-2889 3410-2884 3410-2894 11 3410-2757 3410-2880 3410-2890 3410-2885 3410-2895 12 3410-2758 3410-2881 3410-2891 3410-2886 3410-2896 TECH 10 LIMITED EDITION BOOT PRICE: 899.95 SIZE: 8 - 12 DAYTONA ACUMEN SQUAD LASER VISION
O F F R O A D 27 ALPINESTARS MOTORCYCLING COLLECTION TECH 7 BOOT + Lightweight upper combines suede leather with lightweight microfiber for impact and abrasion resistant TPU shell. + Innovative, evolutionary TPU shin-plate construction for greater range of fitment features a reinforced hook and loop closure for comfortable, highly customized closure. + Soft microfiber gaiter helps seal out excessive water and dirt entry. + Evolutionary design for lateral flex zone provides front and rear flexion support and helps prevents torsion. + Medial-facing panel constructed from TPU with rubber insert for maximum grip contact with bike and improved heat and abrasion resistance. + Contoured TPU calf protector plate offers impact resistance. + Extensive TPU protection on toes, foot, heel, ankle, calf and shin with extra hard compounds on the toe-box, heel and achilles tendon. + Closure system includes polymer buckles plus aluminium frame with innovative self-aligning, quick release closures for customized secure fitment. + All the buckles are replaceable. + TPU lower shell is reinforced with metal shank and includes toe reinforcement for impact and abrasion resistance. + Poly fabric lining with 3D open cell foam incorporates anti-sliding suede reinforcement on heel area. + Exclusive dual compound sole is seamlessly integrated to the multi-density foot base structure with built-in support; the sole superior durability and grip. + Main flexion of the boot is supported around medial and lateral ankle by low profile pivot system which dissipates friction when bending the boot. + Shock absorbing padding on the heel and ankles plus an ultra thin and flexible forefoot area for increased sensitivity and control. + Removable anatomic footbed in lycra on top. + Replaceable footpeg insert on sole is constructed from hard compound vulcanized rubber for durability and protection. + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. PRICE: 539.95/ $579.95 SIZE: 7 - 14 SIZE A - DOUBLE PURPLE WHITE B - ALPINE BLUE NIGHT NAVY BRIGHT RED C - BLACK/ COOL GREY/ RED D - RED 8 3410-3016 3410-3024 3410-2652 3410-2660 9 3410-3017 3410-3025 3410-2653 3410-2661 10 3410-3018 3410-3026 3410-2654 3410-2662 11 3410-3019 3410-3027 3410-2655 3410-2663 12 3410-3020 3410-3028 3410-2656 3410-2664 13 – – 3410-2657 3410-2665 A C D B
28 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION TECH 7 BOOT CONT’D SIZE (A) WHITE (B) BLACK/ SILVER/ WHITE/ GOLD (C) BLACK (D) WHITE/BLACK (E) BLACK/DARK BLUE/RED/ WHITE (F) BLACK/BLUE/ YELLOW FLUO 7 3410-1125 - 3410-1137 - - - 8 3410-1126 3410-2231 3410-1138 3410-2483 3410-2800 3410-2808 9 3410-1127 3410-2332 3410-1139 3410-2484 3410-2801 3410-2809 10 3410-1128 3410-2333 3410-1140 3410-2485 3410-2802 3410-2810 11 3410-1129 3410-2334 3410-1141 3410-2486 3410-2803 3410-2811 12 3410-1130 3410-2335 3410-1142 - 3410-2804 3410-2812 13 3410-1131 - 3410-1143 - 3410-2805 3410-2813 14 3410-1132 - 3410-1144 - - - A D E F B C
O F F R O A D 29 ALPINESTARS MOTORCYCLING COLLECTION TECH 7 ENDURO BOOT + Upper construction is made from lightweight microfiber material for flexibility, durability and abrasion resistance. + Light microfiber front and rear bellow inserts offer improved comfort and flexibility in key area. + Toe box is constructed from synthetic material for abrasion performance. + Extended PU synthetic gaiter helps seal out excessive water and dirt entry. + Contoured TPU calf protector plate, TPU higher medial protector, TPU outer lateral ankle and TPU heel counter offer support and resistance to impacts. + Rear TPR gaiter patch applied on top of the TPU calf protector gives protection and comfort on rear flex. + Injected TPU shin plate connected with the TPU medial protector panel; hook and loop grip upper closure, plus TPR flap for broad ranging calf fit adjustment and support. + The TPU higher medial protector is designed with technical texture for improved grip. + Bio-mechanical medial blade system allows front rear flex giving support and protection to the ankle. + The ergonomic TPU triple buckle straps allow smooth frontal flex from the medial protector to the lateral side without compromising range of movement. + Closure system includes 3 polymer buckles with an innovative closure system. + This closure includes a micro-adjustable ratchet with memory and a quick release/ locking system with self-aligning design for easy, precise closure. All buckles are replaceable. + Innovative one-piece TPU injected dual compound foot shell, reinforced by a metal shank inside a co-injected toe reinforcement. + Soft foam surrounds the ankles and collar offering comfort and shock absorbing performance. + Entire textile interior lining for improved levels of comfort and moisture-management. + Replaceable EVA footbed with textile lining on top provides arch support and comfort. + Alpinestars’ exclusive high grip rubber compound outsole provides grip and traction on various surfaces and is profiled to provide control and feel on the bike’s footpegs. The sole is replaceable. + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. 8 9 10 11 12 13 SZ 3410-2864 3410-2865 3410-2866 3410-2867 3410-2868 3410-2869 3410-2686 3410-2687 3410-2688 3410-2689 3410-2690 3410-2691 3410-3034 3410-3035 3410-3036 3410-3037 3410-3038 3410-3039 C - BLACK RED FLUO B - BLACK DARK BROWN A - LIGHT GREY DARK GREY BRIGHT RED PRICE: 549.95 / 569.95 SIZE: 8 - 13 A B C
30 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION TECH 7 ENDURO DRYSTAR® BOOT + Upper constructed from light, innovative microfiber that is flexible and abrasion resistant. + Innovative, evolutionary TPU shin-plate construction for greater range of fitment features a reinforced hook and loop closure for a comfortable, highly customized closure. + Specifically designed sole provides Enduro riders with superior durability, grip, feel and a high level of structural rigidity. + Wide entry aperture for convenience with hook and loop upper closure TPR flap to allow a broad range of calf fit adjustment and support. + Medial-facing area constructed from one-piece TPU panel with honeycomb sculpturing for maximum grip contact with bike and improved heat and abrasion resistance. + Top rear flexion of the boot is supported around the calf by an innovative TPU sliding blade system which dissipates friction. + Ergonomic buckle system offers a secure and highly personalized closure. + Innovative TPU lateral ankle protection provides a biomechanical link between the middle lateral and the bottom lateral of the boot. The instep and Achilles accordion flex zones are constructed for superior control and support. + TPU lower shell is reinforced with a metal shank and includes toe reinforcement for impact and abrasion resistance. + Extended microfiber gaiter helps seal out excessive water and dirt entry. + New closure system includes polymer buckles plus an aluminum frame with innovative self-aligning, quick release closures for a customized secure fitment. + All buckles are easily replaceable. + Drystar® membrane subtly incorporated into chassis for 100% performance against wet penetration. + Soft polyfoam surrounds the ankles and collar to offer comfort and shock absorbing performance. + Removable anatomic footbed. + Exclusive high grip rubber double density compound outer sole. + Sole and footpeg are replaceable. + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. PRICE: 599.95 / 619.95 SIZE: 8 - 13 SIZE A - BLACK/ GREY B - BLACK/ GREY/GOLD C - GREY/ SAND D - BLACK/ WHITE E - BLACK NIGHT NAVY WARM GREY 8 3410-2321 3410-2704 3410-2848 3410-2856 3410-3042 9 3410-2322 3410-2705 3410-2849 3410-2857 3410-3043 10 3410-2323 3410-2706 3410-2850 3410-2858 3410-3044 11 3410-2324 3410-2707 3410-2851 3410-2859 3410-3045 12 3410-2325 3410-2708 3410-2852 3410-2860 3410-3046 13 3410-2326 3410-2709 3410-2853 3410-2861 3410-3047 A B C D D
O F F R O A D 31 ALPINESTARS MOTORCYCLING COLLECTION SIZE (A) BLACK (B) BLACK/ GREY/ WHITE (C) BLACK/ RED (D) BLACK/GREY/ FLUO YELLOW (E) BLACK/RED/ FLUO YELLOW (F) FLUO ORANGE/BLACK/ FLUO YELLOW (G) BLUE/ WHITE 6 3410-1291 - - - - - - 7 3410-1292 - 3410-2506 3410-2667 3410-2719 3410-2815 3410-2823 8 3410-1293 3410-2499 3410-2507 3410-2668 3410-2720 3410-2816 3410-2824 9 3410-1294 3410-2500 3410-2508 3410-2669 3410-2721 3410-2817 3410-2825 10 3410-1295 3410-2501 3410-2509 3410-2670 3410-2722 3410-2818 3410-2826 11 3410-1296 3410-2502 3410-2510 3410-2671 3410-2723 3410-2819 3410-2827 12 3410-1297 3410-2503 3410-2511 3410-2672 3410-2724 3410-2820 3410-2828 13 3410-1298 - 3410-2512 3410-2673 3410-2725 3410-2821 3410-2829 14 3410-1299 - - - - - - TECH 5 BOOT + Upper constructed from innovative and lightweight microfiber material with action leather on toe box + Redesigned instep and Achilles accordion flex zones + Contoured TPU calf protector plate, TPU higher medial protector and TPU outer lateral ankle + Injected TPU shin plate connected with the TPU medial protector panel + Hook-and-loop upper closure and TPR flap for broad-ranging calf fit adjustment and support + TPU higher medial protector is designed with technical texture for improved grip + Bio-mechanical pivot + Ergonomic TPU triple buckle straps + Incorporates innovative one-piece TPU injected dual-compound foot shell, reinforced by a metal shank inside and co-injected toe reinforcement + TPU heel patch connected with shell and lateral/medial TPU sections + Extended PU synthetic gaiter helps seal out excessive water and dirt entry + Soft polyfoam surrounds the ankles and collar + Full inner textile lining + Closure system includes four polymer buckles with an innovative closure system that includes a ratchet with memory and a quick-release/ locking system with self-aligning design for precise closure; all buckles are replaceable + Replaceable anatomic EVA footbed with textile lining on top + Exclusive high-grip rubber compound outsole + Sole is replaceable + CE-certified to 13634:2010 + Available in men’s full U.S. sizes listed; check Alpinestars size chart on page 140 before ordering PRICE: 439.95 SIZE: 6 - 14 A B E C F D G
32 O F F R O A D ALPINESTARS MOTORCYCLING COLLECTION + Upper construction is made from lightweight microfiber material for flexibility, durability and abrasion resistance. + Light microfiber front and rear bellow inserts offer improved comfort and flexibility in key area. + Toe box is constructed from synthetic material for abrasion performance. + Extended PU synthetic gaiter helps seal out excessive water and dirt entry. + Contoured TPU calf protector plate, TPU higher medial protector, TPU outer lateral ankle and TPU heel counter offer support and resistance to impacts. + Rear TPR gaiter patch applied on top of the TPU calf protector gives protection and comfort on rear flex. + Injected TPU shin plate connected with the TPU medial protector panel; hook and loop grip upper closure, plus TPR flap for broad ranging calf fit adjustment and support. + The TPU higher medial protector is designed with technical texture for improved grip. + Bio-mechanical medial blade system allows front rear flex giving support and protection to the ankle. + The ergonomic TPU triple buckle straps allow smooth frontal flex from the medial protector to the lateral side without compromising range of movement. + Closure system includes 3 polymer buckles with an innovative closure system. + This closure includes a micro-adjustable ratchet with memory and a quick release/ locking system with self-aligning design for easy, precise closure. All buckles are replaceable. + Innovative one-piece TPU injected dual compound foot shell, reinforced by a metal shank inside a co-injected toe reinforcement. + Soft foam surrounds the ankles and collar offering comfort and shock absorbing performance. + Entire textile interior lining for improved levels of comfort and moisture-management. + Replaceable EVA footbed with textile lining on top provides arch support and comfort. + Alpinestars’ exclusive high grip rubber compound outsole provides grip and traction on various surfaces and is profiled to provide control and feel on the bike’s footpegs. The sole is replaceable. + According to European statutory law the CE mark is a conformity requirement for the marketing of this product. The following standards apply: EN 13634:2017. TECH 3 BOOT PRICE: 339.95 / 349.95 SIZE: 5 - 16 SIZE (F) DARK GREY LIGHT GREY BLACK (A) BLACK (B) BLACK/ WHITE (C BLUE/ WHITE/ RED (D) WHITE BRIGHT RED DARK BLUE (E) BRIGHT RED DARK BLUE YELLOW FLUO 5 3410-1884 - - - - 6 3410-1885 - - - - 7 3410-3049 3410-1886 - - 3410-2831 3410-2839 8 3410-3050 3410-1887 3410-1911 3410-2347 3410-2832 3410-2840 9 3410-3051 3410-1888 3410-1912 3410-2348 3410-2833 3410-2841 10 3410-3052 3410-1889 3410-1913 3410-2349 3410-2834 3410-2842 11 3410-3053 3410-1890 3410-1914 3410-2350 3410-2835 3410-2843 12 3410-3054 3410-1891 3410-1915 3410-2351 3410-2836 3410-2844 13 3410-3055 3410-1892 3410-1916 3410-2352 3410-2837 3410-2845 14 3410-1893 - - - - 15 3410-1894 - - - - 16 3410-1895 - - - - F A B C D E
O F F R O A D 33 ALPINESTARS MOTORCYCLING COLLECTION TECH 3 ENDURO WATERPROOF BOOT + Upper construction is made from innovative and light microfiber material that is flexible, offering high levels of abrasion and water-resistance, durability, and improved weight-savings. + Waterproof membrane provides wet weather performance. + Light microfiber on front and rear bellow gives more comfort on the flexible area. + New innovative closure system includes an aluminum frame with self-aligning, quick-release closures incorporating a ratchet with memory for a customized, secure fit; all buckles are replaceable. + The ergonomic TPU triple buckle straps wrap the front flex from the medial protector to the lateral side without compromising the flex. + Dual compound sole is seamlessly integrated into the base structure for superior durability and performance as well as grip and feel. + Toe box is made of synthetic material for high abrasion. + Extended PU synthetic gaiter helps seal out excessive water and dirt entry. + Contoured TPU calf protector plate, TPU higher medial protector, TPU outer lateral ankle and TPU heel counter offer support and resistance to impacts. + Rear TPR gaiter patch applied on top of the TPU calf protector gives protection and comfort on rear flex. + Injected TPU shin plate connected with the TPU medial protector panel; hook and loop upper closure, plus TPR flap for broad ranging calf fit adjustment and support. + The higher TPU medial protector is designed with technical texture for improved grip. + Bio-mechanical medial blade system offers good front rear flex giving support and protection to the ankle. + Innovative, one-piece TPU injected dual compound foot shell, reinforced by a metal shank inside a co-injected toe reinforcement. + Soft foam surrounds the ankles and collar offering comfort and shock absorbing performance. + Entire textile lining for more comfort. + Replaceable EVA footbed with textile lining on top. + Exclusive high grip rubber compound outsole. The sole is replaceable. + The TECH 3 Enduro Waterproof boot is CE certified to EN 13634:2017. PRICE: 439.95 SIZE: 7 - 13 SIZE BLACK WHITE 7 3410-3057 8 3410-3058 9 3410-3059 10 3410-3060 11 3410-3061 12 3410-3062 13 3410-3063
RkJQdWJsaXNoZXIy NDI5NTY=