BOLD MAGENTA part numbers are new for 2024 PARTSCANADA.COM 2024 | ATV/UTV AUDIO/COMMUNICATION & MOUNTS 162 DESCRIPTION PART # M10 x 1.25 base 0636-0063 DESCRIPTION PART # M10 x 1.5 base 0636-0064 RAM MOUNT MALE-THREAD BASES WITH 1” BALL •Powdercoated marine-grade aluminum and rubber construction •Choice of M10 x 1.25 pitch or M10 x 1.50 pitch thread; both with 1” B-size rubber ball •PART #0636-0063 features M10 1.25 pitch male thread connected to a 1” rubber ball; diameter of the round flange is 14.5mm and the thread length is 10.15mm •PART #0636-0064 features M10 x 1.5 pitch male thread connected to a 1” rubber ball; diameter of the round flange is 14.3mm and the thread length is 10.5mm DESCRIPTION PART # RAM Tough-Ball™ w/ threaded stud 0636-0151 RAM TOUGH-BALL™ WITH THREADED STUD • 1” diameter rubber ball connected to a male-threaded post •High-strength composite and steel • B-size 1” rubber ball; M6-1 x 6mm threaded post DESCRIPTION PART # Fork stem w/ 1” ball 0603-0457 DESCRIPTION PART # X-Grip® mount w/ fork stem base 0603-0898 RAM MOUNT FORK STEM BASES •Cleanest way to mount small electronics •PART #0603-0898 consists of a fork stem base, short length double-socket arm and RAM X-Grip®; holder dimensions: 1.75”-4.5” W, 0.875” D •Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit DESCRIPTION PART # RAM Track Ball™ w/ T-bolt attachment 0603-0828 RAM TRACK BALL™ WITH T-BOLT ATTACHMENT • B-size, 1” rubber ball molded to a high-strength composite base •Rubber friction washer and a stainless steel T-bolt for sliding into virtually any track system • Insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten in place; twist counterclockwise to loosen DESCRIPTION PART # Tough-Track™ composite 3” track 0603-0827 RAM TOUGH-TRACK™ TOP-LOADING COMPOSITE 3”TRACK •High-strength composite •Can be drilled to any flat surface • Designed to use with #10 screws for easy installation, hardware not included • Works with a wide variety of RAM track bases to attach cameras, fishing rods, phones, etc. • Dimensions: 4.75” L x 1.75” W • Track thickness .35”, inside track length 3” 0603-0457 0603-0898 0636-0063 •Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from .5”-1.10” •Powdercoated marine-grade aluminum
RkJQdWJsaXNoZXIy NDI5NTY=