BOLD MAGENTA part numbers are new for 2024 HANDLEBARS & CONTROLS PARTSCANADA.COM SNOW | 2024 181 4.25”WIDE RISERS RISERS HEIGHT ARCTIC CAT YAMAHA 6” PM155301 PM155302 1 Fits Arctic Cat 00-18 models with pivot risers except those with the adjustable riser. Will also work with 94-99 flat top steering post sleds with the use of pivot adapter kit PART #15581. 2 Fits Yamaha with the use of pivot adapter kit PART #15583. PIVOT-STYLE RISERS • Machined from 6061-T6 aluminum for maximum strength; includes bolts and clamps • Use as a direct OEM pivot riser replacement to customize bar height or with PowerMadd pivot adapter kit (wide pivot riser only) • Requires “T” style steering post or flat-top steering post with PowerMadd pivot adapter kit • Wide pivot risers fit 4-4.5”W steering post • When raising bars, verify amount of slack available in throttle cable and brake lines; extended throttle cables and brakes lines are available • Allow handlebars and rider to move forward, optimizes center of gravity and improves handling and control (like the Ski-Doo MXZ-REV chassis concept) NOTE: Designed for a“T” style steering post; with the use of a Pivot Adapter Kit the Pivot-Style Riser blocks can be used on a flat steering post. NOTE: See extended-length brake lines in the Brakes section. FITS MODEL PART # Arctic Cat (all thru 99) 15581 Arctic Cat (all 00-current) 15580 Polaris 15581 FITS MODEL PART # Ski-Doo 15582 Yamaha (all 95-current) 15583 PIVOT ADAPTER KIT PIVOT-STYLE RISER BLOCK CONVERSION KIT • Machined from 6061-T6 aluminum for added strength • Raises bars an additional 1.25”; for use with PowerMadd pivot riser blocks • Choose a PowerMadd Riser Block height of 2”, 4”, 6”, 8” or 10”, or an OEM pivot-style riser block (sold separately) • Fits all snowmobiles with a flat-top steering post • Converts a flat-top steering post to a “T” style post, to use 4.25” Pivot Style Risers • Handlebars can be pivoted forward or back from original stock position • Using pivot adapter and 2” riser block will not require extending cables or wiring on most snowmobiles • Includes four C-clamps and all needed mounting hardware NOTE: Order an Arctic Cat model of the PowerMadd Pivot Riser Blocks to fit on the Yamaha pivot adapter. DESCRIPTION PART # Universal 3” Pivot Adapter/Riser 0602-0098 DESCRIPTION PART # Universal Riser Block 3” 0602-0099 UNIVERSAL PIVOT RISER SYSTEM • Works on all brands of snowmobiles with flat steering post • Raises bars 3” and can be used without additional riser blocks • Add additional riser blocks to increase bar height • Use PowerMadd’s throttle cable extension kit to lengthen the stock throttle cable, if necessary 0602-0099 NOTE: With the use of a Pivot Adapter Kit the Pivot-Style Riser Blocks can be used on flat steering post NOTE: Older Arctic Cat models with 1/4”clamp bolts and Ski-Doo Rev and Yamaha models with threaded holes require drilling of the steering plate. If you convert the sled back to stock, you must use nuts underneath the plate to secure the clamp. 15580 HOW TO ORDER 1. Does your sled have a pivot riser? If not, you need a pivot adapter. 2. How wide is your current pivot riser? 3.What brand of snowmobile do you have? 4. How tall of a riser would you like? Pivot style Riser Blocks Designed for a “T” style steering post 0602-0098 Stock caps Universal Pivot without additional riser stock Powermadd provided caps
RkJQdWJsaXNoZXIy NDI5NTY=