BOLD MAGENTA part numbers are new for 2025 FUEL/AIR SYSTEMS PARTSCANADA.COM ATV/UTV | 2025 FUEL/AIR SYSTEMS 739 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # For 3/16” fuel line P537 For 1/4” x 5/16” fuel line 877249 DESCRIPTION PART # For 1/4” fuel line P12-035 For 5/16” fuel line P12-036 IN-LINE FUEL VALVES •For use with auxiliary fuel tank or other use requiring an in-line installation •Features double neoprene seals and O-rings •Smooth and positive operation •PART #s P537 and 877249 are not recommended for engines over 200cc •PART #s P12-035 and P12-036 are not recommended for engines over 300cc SIZE PART # 1/4” ID 0706-0035 SIZE PART # 5/16” ID 0706-0034 STRAIGHT-THROUGH FUEL LINE QUICK-DISCONNECT COUPLINGS •Straight through; no shut off •Available for 1/4” and 5/16” ID fuel line •Capable of withstanding temperatures of -40 to 82 °C (-40 to 180 °F) •Viton®-type fluoroelastomer O-rings provide superior chemical resistance •Made in the U.S.A. NOTE: Not for use with fuel injected engines. DESCRIPTION PART # Dual, 1/4” P12-037 Dual, 5/16” P12-038 Single, 1/4” P12-029 Single, 5/16” P12-030 DESCRIPTION PART # REPLACEMENT COMPONENTS Repl. O-ring for PART #P12-029 877283 Repl. O-ring for PART #P12-030 877284 FUEL LINE QUICK-DISCONNECT COUPLINGS •Single or dual shut-off valves •When connected fuel will flow and when disconnected fuel will not flow •Use dual shut-off for fuel tanks equipped with a crossover line • For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve •Available for 1/4” and 5/16” ID fuel line DESCRIPTION PART# 90° 878123 DESCRIPTION PART# Straight outlet 877242 FUEL VALVES • Features 1/4” NPT pipe thread on one end and a 1/4” barb on the other •Available with straight or with 90° outlet •Rugged steel construction with zinc plating •Viton® O-ring stands up to most commonly used fuels P12-035 P12-036 P537 877242 878123 0706-0034 P12-029 P12-030 P12-037 P12-038 •Capable of withstanding temperatures of -40 to 82 °C (-40 to 180 °F) • These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings with superior chemical resistance •Made in the U.S.A. NOTE: Not for use with fuel injected engines.
RkJQdWJsaXNoZXIy NDI5NTY=