Street Bikes Brake pads should be fitted by experienced mechanics in accordance with the motorcycle manufacturer’s service manual. New pads require bedding-in (80% contact area) before maximum performance is achieved. This may take up to 150 miles (250kms). Until then use brakes gently, only braking severely in an emergency. Replace pads when thickness of material reaches 2mm. Fitness For Purpose The DP brake pads listed in this fitments guide are warranted to be of merchantable quality and fit for the purpose they are supplied i.e. motor vehicles as described herein. Advice should be obtained in writing from the company if alternative uses are proposed for the product. All DP Brakes friction material is asbestos free. Aftermarket Discs/Rotors DP Brakes have been extensively developed and tested for use with original equipment discs/rotors. Advice should be obtained in writing from the company if alternative discs/ rotors are intended to be used. IMPORTANT NOTES 591 www.dp-brakes.com | All information in this application guide is © Phil Ayliff Products Ltd 2025.
RkJQdWJsaXNoZXIy NDI5NTY=