NOTES 37 1 Also fits 35kW version 2 Fits with original panniers 3 Fits with original center stand 4 Compatible both with stock exhaust and LeoVince slip-on 5 Attention! On vehicles equipped with dual lambda sensors, removing the original catalytic converter may cause the "Check Engine" light to come on 6 ATTENTION! FITMENT NOTICE FOR NON-EUROPEAN COUNTRIES: Please verify the following before purchase! Scrambler model years are based on euro models. NON-EUROPEAN models can have one of two types of OEM exhaust, one with a spring attaching the stock muffler and one without [uses a clamp]. If your exhaust uses a spring, please purchase part number 15206, 15206B, 15206C, 15206FB or 14118. If it has a clamp [and no spring] please purchase part number 15250, 15250B, 15250C, 15250FB or 14399 7 Compatible with original exhaust 8 Compatible with original under cowl 9 Warning! The stock indicators have to be removed in order to install the exhaust. 10 US model only 11 Do not fit with original center stand 12 Do not fit with center stand 13 Warning! For some versions from 2021 onwards, fitting kit 3014314602R may be required, if not included in the package, must be ordered separately 14 Fits with original skid plate, engine guard and center stand 15 Fits with original panniers and center stand 16 Not compatible with Husqvarna Passenger Footpeg removal Kit Art.28505988000 17 Replaces the stock pre-silencer and eliminates the catalyst 18 NOTICE: stainless steel muffler mounting bracket (not carbon fiber) 19 Replaces the stock heat shield, compatible both with stock and LeoVince exhaust 20 Also fits 33kW version 21 Not compatible with Z 250 SL 22 Pre-silencer delete pipe, original catalyst is maintained 23 Also compatible for model with double oxygen sensor, VIN number starts with ML5EX650S... 24 Also compatible for model with double oxygen sensor, VIN number starts with ML5LE650JJDA... 25 Also compatible for model with double oxygen sensor, VIN number starts with ML5ER650S... 26 Not compatible with 35kW & 70kW versions 27 Also fits 35kW & 70kW versions 28 US model only, do not fit with panniers 29 Not compatible with original panniers 30 Low & high mount 31 ATTENTION! FITMENT NOTICE FOR NON-EUROPEAN COUNTRIES: Please verify the following before purchase! Duke 390 model years are based on euro models. NON-EUROPEAN models can have one of two types of OEM exhaust, one with a flange-type connection and one with a conventional slip-fit. If your exhaust uses a flange-type connection, please purchase part number 8086, 15116, 15116U, 14183E, 14184E, 14185E, 14186E, 15263U, 15263BU, 15263FBU, 15502U, 15502EU or 15502MU. If it has conventional slip-fit, please purchase part number 3399, 3399U, 3399E, 3399EU, 3399M, 3399MU, 14393E, 14393EB, 14394E, 14395E, 14395EU, 14396E, 14396EU, 15249, 15249U, 15249B, 15249BU, 15249C, 15249FB or 15249FBU 32 Also fits 32kW version 33 ATTENTION: US market motorcycles have larger rear turn signals than the European versions and owners will need to either remove the OEM rear turn signals or use smaller aftermarket signals when mounting this exhaust to provide adequate clearance 34 Fits with rails for original and Givi panniers 35 35kW & 70kW 36 Short tail pipe 37 Compatible with original under cowl Part # 94400-25810-000 38 Warning! Not compatible with original under cowl Part # 99F00-SAB8S-QU1 39 Also fits 660cc model, 35/70kW versions 40 Fitting with original under cowl requires optional kit LeoVince Art.80051 41 Warning! ECU must be remapped 42 Black painted header pipes 43 Fitment on Euro 5 model requires optional lambda wire extension harness ART.208194R 44 FITMENT NOTICE FOR NON-EUROPEAN COUNTRIES: Wire extension harness is required only if your O2 sensor is near the exhaust ports on motor, see product user manual. 45 Homologation is valid only if catalytic converter in installed! 46 Warning! Fitting kit 3014372602R is required, if not included in the package due to old stock, must be ordered separately
RkJQdWJsaXNoZXIy NDI5NTY=