2025-2026 Parts Canada OldBook

EVOLUTION BIG TWIN • SHOVELHEAD • PANHEAD KNUCKLEHEAD • FLATHEAD • IRONHEAD XL OldBook 2025-2026 TM Canadian Catalogue

A 1999 FLSTF Fat Boy transformed from stock to stunning is the 2025-2026 Drag Specialties OldBook cover bike. It was designed and built by Shannon Reinhart of EDZ Motorcycle Service & Repair, a oneman motorcycle repair and customizing shop. “The idea behind this bike is ‘less is more,’” said Reinhart. “I looked at the overall bike design and tried to keep it simple – if it didn’t need something, I took it off. I wanted that classic bobber style, a lean, muscular look.” Reinhart stressed that this build really is something you can put together using the Drag Specialties OldBook. “The focus when working with Drag Specialties is using what is available in the catalogue,” Reinhart said. “After the initial discussion I had about undertaking the build, I opened up the book, and just started to make a list of what I thought would result in a neat final bike.” Reinhart said it is typical the Drag team will give some direction or suggest certain parts get used in a build. “But when I submitted my initial parts list suggestion, they said ‘Hey, this should turn out great! You made our job a lot easier,’” laughed Reinhart. “They really didn’t change anything I suggested as far as vendor or product choices.” Parts list approved, the work began. “It really only took a couple of months to complete it,” Reinhart said. “The original deadline was for September, and that got moved back to August, so there was a little added pressure. But it worked out OK.” The front end is raked out using a set of Arlen Ness triple trees, with a Drag Specialties headlight nacelle kit to keep it clean and simple. “I put the headlight nacelle on as way to incorporate the front turn signals into the design for a strong, simple-looking front end.” The rear of the bike features a Russ Wernimont custom fender for an abbreviated, hot-rod look. “The rear has a custom-mount license plate frame with all the lighting incorporated into it – again, to keep it ON THE COVER Builder: Shannon Reinhart EDZ Motorcycle Service & Repair Paint: Nathan Bowers Paint Studio LLC

simple and tidy,” Reinhart said. The motor is an 80” Evolution Big Twin with the stock bore/stroke, enhanced with classic upgrades from S&S Cycle: a new intake manifold, a Super E carburetor, and a complete air cleaner kit. The bike’s soundtrack comes from a 2-into-1 exhaust system from Bassani. The seat was the one area that required a mid-build change of plan. “I originally was going to go with a frame-mounted seat,” Reinhart said. “But the rear fender kit eliminated the stock fender struts for a tighter look. That moved the fender in closer on the frame so a stock-style seat wouldn’t fit any more. I switched the design to use a spring-style solo seat. And it turned out pretty good!” A small but important detail some builders overlook is the engine hardware. Reinhart swapped out all the stock fasteners for quality 12-point hardware from the OldBook. “So many people put a lot of effort into the motor finishes and nice paint, then keep the stock fasteners. They often start to corrode pretty quickly. Quality hardware – like the Feuling 12-point bolt kits - are a great upgrade to any build.” The paint is a beautiful silver leaf PPG Brandywine over black and clearcoat and the Drag Specialties logo is silver leaf with orange pinstripe. And the 3” primary drive belt has a hand-painted Drag Specialties logo. All this cool custom paint work was laid down at Nathan Bowers Paint Studio in Decatur, Indiana. And it is a runner. “I rode the bike from Sturgis to Rapid City for the final delivery,” Reinhart said. “It ran a steady 75 mph down the interstate no problem.” “This build was a lot of fun,” Reinhart said. “I wanted to design and build a bike that anybody, with time and effort, could make.” dragspecialties.com | #SINCE1968 WE SUPPORT THE SPORT ®

14.Brakes............................ 645-685 15. Tanks & Oil Filters. . . . . . . . . . . . . . . . . . . . 686-712 16.Dashes&Gauges. ................... 713-729 17. Frames & Suspension.. . . . . . . . . . . . . . . . . 730-763 18. Fenders & License Plate Frames. . . . . . . . . . 764-784 19. Footrests & Floorboards. . . . . . . . . . . . . . . . 785-821 20.Wheels&Axles...................... 822-828 21. Hardware, Covers & General.. . . . . . . . . . . . 829-854 OEM Cross Reference.. . . . . . . . . . . . . . . . . . . . 855-872 VINGuide............................. 873-876 Drag Specialties Quick Reference Chart.. . . . . . . 877-878 Index................................ 879-905 1. Windshields & Fairings.. . . . . . . . . . . . . . . . . . . 8-50 2. Audio, Communication & Mounts.. . . . . . . . . . . 51-84 3. Saddlebags & Luggage.. . . . . . . . . . . . . . . . . 85-152 4. Seats & Sissy Bars.. . . . . . . . . . . . . . . . . . . 153-190 5.Exhaust. .......................... 191-228 6.Fuel/AirSystems..................... 229-257 7.Engine............................ 258-316 8. Transmission & Driveline.. . . . . . . . . . . . . . . 317-373 9.Gaskets&Seals...................... 374-395 10.Electrical........................... 396-460 11.Lighting............................ 461-534 12. Handlebars, Controls & Mirrors.. . . . . . . . . . 535-612 13.Cables............................ 613-644 OldBook 20252-20263 TM Please Note: All Evolution Sportsters are in the 2025 FatBook™. All Evolution Big Twins are in THIS catalogue are in THIS catalogue.

5 IMPORTANT INFORMATION: EMISSIONS REGULATIONS NOTE: The California Air Resources Board (“CARB”) does not permit the use of aftermarket emissions-related part(s) that alter the performance of OEM emissions-related devices unless CARB has issued an Executive Order, other than on racing vehicles on closed courses. Check your local laws and manufacturer’s information. More California exhaust information is available at www.arb.ca.gov/. NOTE: Parts designated as “Race Only” are for use only on vehicles used for competition racing and are not for use on vehicles registered for use on public roads. Sale and/or installation of “Race Only” parts in any way inconsistent with this warning is prohibited and may result in enforcement by the U.S. EPA under the federal Clean Air Act. “RACE ONLY” PARTS ARE NOT LEGAL FOR SALE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES. NOTE: Aftermarket products, including but not limited to exhausts, catalytic converters, oxygen sensors, fuel/air controller modules, air filter kits, camshafts, O2 eliminators, and carburetors and jet kits which alter, modify, or replace emission control devices or systems of an originally compliant highway motorcycle, are not legal for sale or street use in California unless they have been issued a CARB Executive Order. Aftermarket emissions-related products which have not been issued an Executive Order or which are not aftermarket Replacement Parts, as defined in Title 13, California Code of Regulations, Section 1900(b)(2), are authorized for closed circuit race use only. Products shown may be designed, manufactured, intended and sold for closed circuit race use only and use of the same on public roads or lands may be a violation of local, state and/or federal laws. See manufacturer’s information and state and local laws to determine what is authorized for your use on your vehicle. The following emissions-related defined terms are used in this catalogue (PARTS WITH THE FOLLOWING DESIGNATIONS IN THIS CATALOGUE ARE NOT ILLEGAL FOR SALE IN CALIFORNIA UNDER CARB REGULATIONS): • “CARB E.O.” means the specified Executive Order issued by CARB. An Executive Order constitutes an exemption by CARB from CA Vehicle Code 27156 and 38391, for sale of the part number for the make/model/year fitment(s) specified in the Executive Order. • “Replacement Part” means any aftermarket part intended to replace an original equipment emissions-related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part. • “Qualified Manufacturer Declared Replacement Part” means any aftermarket part intended to replace an original equipment emissions related part and which is functionally identical to the original equipment part in all respects which in any way affect emissions (including durability), or a consolidated part, that has been evaluated and declared by the manufacturer to meet this definition and carry this categorization and designation label. This manufacturer has declared in writing that it has documentation, based upon sound engineering judgment, indicating the replacement part does not reduce the effectiveness of any required emission control device and it does not cause the modified vehicle/engine/equipment to exceed applicable emissions standards for that make/model/year fitment(s) advertised. In addition, for 49-State compliance, the following term applies: • “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” (Not legal for sale or use in California) means any aftermarket part intended to replace an original equipment emissions-related part and that meets all EPA emission regulations by installing the element of design in all emissions-related respects to the certified configuration of the vehicle, engine, or piece of equipment. This manufacturer has declared in writing that it has fully documented the emissions testing of an appropriate test vehicle, engine, or piece of equipment that had been identically altered and that the part meets all applicable emissions standards for that make/model/year fitment(s) advertised.

6 IMPORTANT INFORMATION: EMISSIONS PRODUCT CATEGORIZATION This catalog implements use of a categorization system developed by SEMA to identify emission products’ classifications and any corresponding restrictions on sales of those products. The products will be identified as fitting one of the following categories, as determined by the vendor/manufacturer. The categorization system is set forth below. The applicable product classification is displayed under the “EMIS” column in the catalog. Category Meaning Sales Restrictions 1 This Product is covered under a CARB EO and is legal for sale and use in all 50 states. See “CARB EO” definition on page 5. No USA Territory Restrictions. 2 This product is covered under a SEMA Certified Emissions certification or has otherwise met the requirements of the EPA’s Tampering Policy and is legal for sale in states that do not mandate an EO. See “Qualified Manufacturer Declared 49-State Federal Emissions Compliant Part” definition on page 5. Blocked from sales into California. 3 This product is not legal for street use on an emissions-controlled vehicle. It may be used on dedicated competition or pre-pollution-controlled vehicles only. See “Race Only” Note on page 5. *Products for which vendors did not supply classification information are by default coded as “3.” Blocked from sales in ALL states unless dealer signs acknowledgment of dealer’s obligation to ensure sales or installation of such parts are on “Competition Use” only vehicles and not for highway use. 4 This product does not require an EO in California. By nature of its design, it is legal for sale and use in all 50 states. Replacement parts included. See “Qualified Manufacturer Declared Replacement Part”definition on page 5. No USA Territory Restrictions. N/A Product not subject to emissions control regulations. No USA Territory Restrictions SEMA CATEGORIZATION LABELS

7 IMPORTANT INFORMATION: SALES OF RACE ONLY PARTS The federal Environmental Protection Agency’s policies related to tampering and defeat devices are publicly available at the following sites: https://www.epa.gov/sites/production/files/2020-12/documents/ epatamperingpolicy-enforcementpolicyonvehicleandenginetampering.pdf https://www.epa.gov/sites/production/files/2020-12/documents/ tamperinganddefeatdevices-enfalert.pdf https://www.epa.gov/sites/production/files/2021-01/ documents/caatitleiivehicleenginepenaltypolicy011821.pdf The EPA has taken civil and criminal enforcement action against companies and individuals for violations of the Clean Air Act’s tampering and defeat device prohibitions. By ordering “Race Only” parts from LeMans Corporation, d/b/a Parts Unlimited® and Drag Specialties® (“LeMans”), you as the selling retailer expressly acknowledges and assumes all the responsibility for ensuring and documenting information to verify that the sale or installation of every “Race Only” part is for competition racing vehicle use only. Examples of such documentation include: • Require that the buyer of the part(s) sign an acknowledgement that the part is for “Race Use Only.” The acknowledgement would contain enough information (i.e., invoice number, purchase date, purchaser name, part number, etc.) to be able to track the part to its ultimate installation. • Evidence that the vehicle is not registered in any State for highway use. • The detailed owner or operator information and vehicle VIN are recorded. • The vehicle is being used in only closed course competition events like King of the Baggers®, BRL Bagger Racing League®, SUPPER HOOLIGAN®, AMA FLAT TRACK®, or one of the hundreds of similar competition racing use only events throughout the US (road race, flat track, drag racing and land speed). If you have questions regarding the information that you should collect as evidence that the part purchased from LeMans and sold or installed by you/your company will be used only on a “Race Only” vehicle as intended, please refer to your legal counsel or racing trade association. This notice is a material condition of LeMans’ willingness to sell the product to you. By accepting the terms: 1. You are solely responsible to verify and document that use of “Race Only” parts will be limited to competition racing use consistent with the terms of this notice on each individual sales transaction; 2. You will provide LeMans with copies of the documentation that shows evidence of the use of “Race Only” parts purchased from LeMans upon request; and 3. You consent to the disclosure of your identity to any governmental entity responsible for regulating emissions and/or enforcing emissions laws, if requested. NOISE REGULATIONS A number of jurisdictions/states have exhaust noise laws. Exhaust products advertised might not be legal for sale or use on highway vehicles in such jurisdictions/states. Check applicable laws and regulations.

8 Windshields.. . . . . . . . . . . . . . . . . . . 9-17, 19-32 Fairings.. . . . . . . . . . . . . . . . . . 18, 33-42, 44-45 Brackets And Mounts.. . . . . . . . . . . . 22-23, 46-47 Fairing Pouches/Windshield Bags.. . . . . . . . . . . 29 FairingTrim..................... 43,45-46 Windscreen Fasteners/Well Nuts.. . . . . . . . . 46-47 Windshield/Handlebar Bags.. . . . . . . . . . . . 48-50 WINDSHIELDS & FAIRINGS

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 11 See FATBOOK For Late Model Applications FLARE® WINDSHIELDS •Pro Touring style available •The Pro Touring Flare® is a wider, more full-coverage option for riders and passengers looking for greater wind protection during long-haul touring, yet is stylish enough for use around town •The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare® kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management PRO-TOURING FLARE® PART # DESCRIPTION FOR 98 FLTR/FLTRX 2310-0482 14” dark smoke 2310-0481 14” tint 2310-0749 12” dark smoke 2310-0748 12” tint SPORT FLARE® PART # DESCRIPTION FOR 98 FLTR/FLTRX/FLTRU 2310-0358 12” dark smoke 2310-0194 12” tint 2310-0196 8” black 2310-0214 8” dark smoke 2310-0207 8” tint ICE KOLOR FLARE® WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Windshields are made from acrylic and have a vibrant fluorescent edge to give your motorcycle a little extra pop •All are predrilled for easy mounting using stock windshield hardware •Pink Ice windshields were previously cataloged as Red Ice •Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192. PART # DESCRIPTION FOR 96-98 FLHT/FLHTC 2310-0737 6.5” blue 2310-0736 6.5” green 2310-0733 6.5” orange 2310-0735 6.5” pink 2310-0734 6.5” yellow PART # DESCRIPTION FOR 96-98 FLHT/FLHTC (CONT) 2310-0760 3.5” blue 2310-0759 3.5” green 2310-0756 3.5” orange 2310-0758 3.5” pink 2310-0757 3.5” yellow PART # DESCRIPTION FOR 98 FLTR/FLTRX 2310-0722 8” blue 2310-0721 8” green 2310-0718 8” orange 2310-0720 8” pink 2310-0719 8” yellow •Made of Lexan® Polycarbonate with FMR hard coating on both sides of the shield for unmatched durability •All are predrilled for easy mounting using stock windshield hardware •Made in the U.S.A. NOTE: The black version may not be suitable for shorter riders as it’s an opaque material. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0194 2310-0749 2310-0748 2310-0737 2310-0759 2310-0733 2310-0757 2310-0735 2310-0719 2310-0721

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 14 See FATBOOK For Late Model Applications KOLOR FLARE® 9” WINDSHIELDS •Wind tunnel designed and tested, the “hips” provide added downforce while the flip at the tip directs air over the rider to help eliminate the swirl of air found in front of the rider on standard windshields •Windshields are made from acrylic •All are predrilled for easy mounting using stock windshield hardware PART # DESCRIPTION FOR FXRP-STYLE FAIRINGS (W/ STANDARD BOLT PATTERN) 2310-0778 Blue 2310-0830 Bronze 2310-0776 Green 2310-0775 Orange PART # DESCRIPTION FOR FXRP-STYLE FAIRINGS (W/ STANDARD BOLT PATTERN) (CONT) 2310-0829 Purple 2310-0777 Red 2310-0828 Yellow KOLOR SPORT FLARE® WINDSHIELDS •The Kolor Sport Flare® is streamlined and offers radical curves and a sportier stance; it complements the lines of the new fairing with a more aggressive profile and adds stability and handling with improved air management •The patented design features “hips” at the sides that re-route air away from the rider while adding downforce to the front end to improve stability and handling compared to the stock windshield design (the stock design creates lift) •The “flip” at the top of the Flare® kicks air up and over the rider creating cleaner, less turbulent air for the rider and passenger •Wind tunnel tested and designed for maximum performance and air management PART # DESCRIPTION FOR 96-98 FLHT/FLHTC 2310-0819 6.5” blue 2310-0818 6.5” green 2310-0815 6.5” orange 2310-0820 6.5” purple 2310-0817 6.5” red 2310-0816 6.5” yellow PART # DESCRIPTION FOR 96-98 FLTR 2310-0813 8” blue 2310-0812 8” green 2310-0809 8” orange 2310-0814 8” purple 2310-0811 8” red 2310-0810 8” yellow •Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S and also under International Patents: 324093, 324094, 325192 2310-0829 2310-0828 2310-0830 •Windshields are made from acrylic •All are predrilled for easy mounting using stock windshield hardware •Made in the U.S.A. The Klock Werks Flare® Windshields are protected under United States Patents: D632235S, D586274S, D586275S, D633017S, D626046S, D633018S. And also under International Patents: 324093, 324094, 325192. 2310-0819 2310-0815 2310-0817 2310-0816 2310-0809 2310-0812 2310-0814

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 16 See FATBOOK For Late Model Applications PART # DESCRIPTION 2313-0054 17” tall MEMPHIS FATS WITH BIG HEADLIGHT CUTOUT •Features a 9.5” cutout with a custom shape that is designed for a perfect fit on the large nacelle headlights made by Arlen Ness, Rick Doss and others •Popular American styling in clear •Made from Lucite® for excellent optics and durability •22” W •Windshield straps are polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see page 17 •Optional Lowers available for additional windshield coverage, see page 19 •Made in the U.S.A. PART # DESCRIPTION FOR 5 3/4”-7” HEADLIGHT CUTOUTS 13” TALL MEM3110 Clear MEM3119 Solar 15” TALL 2313-0064 Clear 2313-0072 Solar 17” TALL MEM3210 Clear MEM3219 Solar 19” TALL MEM3310 Clear MEM3319 Solar 21” TALL MEM3410 Clear MEM3419 Solar FOR 7” HEADLIGHT CUTOUTS 13” TALL 2311-0100 “Night Shades” clear PART # DESCRIPTION FOR 7” HEADLIGHT CUTOUTS (CONT) 13” TALL (CONT) 2311-0101 “Night Shades” dark black smoke 2311-0102 “Night Shades” black smoke 15” TALL 2311-0103 “Night Shades” clear 2311-0104 “Night Shades” dark black smoke 2311-0105 “Night Shades” black smoke 17” TALL 2311-0106 “Night Shades” clear 2311-0107 “Night Shades” black smoke 19” TALL 2311-0108 “Night Shades” clear 2311-0109 “Night Shades” black smoke PART # DESCRIPTION FOR 7” HEADLIGHT CUTOUTS (CONT) 21” TALL 2311-0110 “Night Shades” clear 2311-0111 “Night Shades” black smoke FOR 9” HEADLIGHT CUTOUTS 13” TALL 2313-0305 “Night Shades” clear 2313-0306 “Night Shades” dark black smoke 2313-0307 “Night Shades” black smoke 15” TALL 2313-0073 Clear 2313-0081 Solar 2313-0308 “Night Shades” clear 2313-0309 “Night Shades” dark black smoke 2313-0310 “Night Shades” black smoke PART # DESCRIPTION FOR 9” HEADLIGHT CUTOUTS 17” TALL MEM3620 Clear 2313-0311 “Night Shades” clear 2313-0312 “Night Shades” black smoke 19” TALL MEM3710 Clear MEM3719 Solar 2313-0313 “Night Shades” clear 2313-0314 “Night Shades” black smoke 21” TALL MEM3810 Clear MEM3819 Solar 2313-0315 “Night Shades” clear 2313-0316 “Night Shades” black smoke MEMPHIS FATS •Features traditional American styling available in clear, solar (a light tint with 72% visible light transmission), “Night Shades” black smoke (a black tint with 40% visible light transmission) and “Night Shades” dark black smoke (a black tint with 25% visible light transmission) •Made from Lucite® for excellent optics and durability •22” W with five standard heights to choose from •Windshield straps are available in polished stainless steel with CNC-machined billet aluminum fittings and stainless steel socket-head screws or the “Night Shades” black version which is a gradient black windshield with black E-coated stainless steel straps, fittings and hardware for a black-on-black sinister look •No-Tool detachable Trigger-Lock mounting hardware must be ordered separately; available in polished or “Night Shades” black, see page 17 •Optional Lowers available for additional coverage; see page 19 •Made in the U.S.A. 2311-0107 MEM3110 MEM3219 2313-0306 MEM3419

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 1 22 See FATBOOK For Late Model Applications MEMPHIS FATS AND SLIM DESCRIPTION POLISHED BLACK FATS/SLIM LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 90-99 FLSTF/F LSTFB/FLS (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 93-96 (w/o OEM light bar) 2320-0089 2320-0091 MEM9891 For 93-96 (w/ OEM light bar) 2320-0021 2320-0044 MEM9891 For 88-99 FLSTSC/FXSTS (w/ light bar)1, 2 2320-0027 2320-0081 - For 88-65 FLSTSC/FXSTS (w/o light bar)1 2320-0027 2320-0081 - For 80-86 FXWG, 84-99 FXST 2320-0013 2320-0078 MEM9888 For 91-99 FXD, FXDL 2320-0011 2320-0077 MEM9884 For 93-98 FXDWG 2320-0013 2320-0078 MEM9888 For 80-86 FXWG and wide (111/2” to 12” wide) forks 2320-0013 2320-0078 MEM9888 For 82-94, 99-00 FXR 2320-0011 2320-0077 MEM9884 For 73-85 FX/FXE/FXS 2320-0011 2320-0077 MEM9884 For 73-85 XL (except 883L/1200X/11-16 1200C, 17 1200CX) 2320-0011 2320-0077 MEM9884 1 88-92 Springer models require headlight relocation kit PART #DS-280339. 2 Light bar must be a curve style to allow installation of the upper bolt and spool assembly. NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS •Gone are the days of fumbling with tools to remove your windshield •The revolutionary No-Tool Trigger-Lock hardware features an innovative system that allows you to quickly and easily remove your windshield without the use of any tools •A pair of latches lock the windshield down until the spring loaded “trigger locks” are intentionally disengaged, allowing the rider to remove the windshield •Hardware is fully adjustable to achieve just the right windshield angle •Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors •Kits are custom-fit to each style of bike for a truly no-hassle installation •Made in the U.S.A. Trigger-Lock Mounts let you remove or change Memphis Shades Fats or Slim Windshields in a moment’s time INDEPENDENT LOWERS KITS •Mounts Memphis Shades Lowers to most motorcycles •Each kit contains two fork clamp/mounting assemblies and all necessary hardware to mount Lowers plastic •Kits can be used with select Memphis Shades windshields and several OEM windshields •Sold in pairs; must order Lowers plastic separately 2320-0013 MEM9884 FATS/SLIM TRIGGER-LOCK MOUNT KITS

WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 1 All part numbers in BLUE are new for the OldBook. 23 See FATBOOK For Late Model Applications SPORTSHIELDS DESCRIPTION POLISHED BLACK SPORTSHIELD LOWERS HARDWARE For 86-99 FLSTC (w/o OEM light bar) 2320-0020 2320-0071 MEM9891 For 86-99 FLSTC (w/ OEM light bar) 2320-0022 - MEM9891 For 90-99 FLSTF/FLSTFB/FLS (w/o OEM light bar) 2320-0020 2320-0071 MEM9891 For 90-99 FLSTF (w/ OEM light bar) 2320-0022 - MEM9891 For 93-96 FLSTN (w/o OEM light bar) 2320-0020 2320-0071 MEM9891 For 93-96 FLSTN (w/ OEM light bar) 2320-0022 - MEM9891 For 91-98 FXD/FXDL 2320-0012 2320-0069 MEM9884 For 93-98 FXDWG 2320-0014 2320-0070 MEM9888 For 80-86 FXWG and wide (111/2” to 12” wide) forks 2320-0014 2320-0070 MEM9888 For 82-94, 99-00 FXR 2320-0012 2320-0069 MEM9884 For 73-85 FX/FXE/FXS 2320-0012 2320-0069 MEM9884 For 73-85 XL (except 883L/1200X/11-17 1200C, 17 1200CX) 2320-0012 2320-0069 MEM9884 For other narrow forks 81/2” to 9” (with 35 mm to 42 mm forks) 2320-0012 2320-0069 - For other wide forks 111/2” to 12” (with 35 mm to 42 mm forks) 2320-0014 2320-0070 - 2320-0071 NO-TOOL TRIGGER-LOCK MOUNT KITS FOR MEMPHIS SHADES FATS/SLIM AND SPORTSHIELDS (CONT) SPORTSHIELDS TRIGGER-LOCK MOUNT KITS PART # DESCRIPTION MEM1719 Solar HELL CAT •Sculpted full-body shape •Measures 20” W x approximately 18” H above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamp that fits 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 11/4” handlebar clamps sold separately (PART #MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. PART # DESCRIPTION MEM2210 Clear PART # DESCRIPTION MEM2219 Solar DEMON •Measures 21” W x 18” H above headlight •Fits most round headlights •Made of Lucite® for excellent optics and durability •Available in clear or solar (a light tint with 72% visible light transmission) •Included two-point mounting hardware consists of polished billet aluminum handlebar clamps that fit 1” and 7/8” handlebars (with sizing band), aluminum rake plates and bushings, stainless steel support rods and socket-head screws •Optional 11/4” handlebar clamps sold separately (PART # MEM9950) •Made in the U.S.A. NOTE: To remove, simply loosen two socket-head screws, leaving clamps on bars for perfect reattachment of shield. MEM2210 MEM2219

Made with FlippingBook

RkJQdWJsaXNoZXIy NDI5NTY=