WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES SECTION 7 All part numbers in BLUE are new for the OldBook. 279 See FATBOOK For Late Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. SIZE BRONZE INTAKE BRONZE EXHAUST GUIDE OD GUIDE ID IN GUIDE ID EX FOR 84-99 EVOLUTION BIG TWIN Std. - 0926-0320 0.5620” 0.3098” 0.3098” +0.001” 0926-0319 0926-0321 0.5630” 0.3098” 0.3098” +0.002” 0926-0721 0926-0722 0.5640” 0.3098” 0.3098” SPECIAL SHOULDERED C630 BRONZE VALVE GUIDES •Precision-machined from nickel bronze •Nickel content of 5% produces superior resistance to wear and approximately 80% copper content delivers outstanding heat conductivity •Compatible with no-lead fuel and accept any type of valve-stem material •Overall length of both intake and exhaust is 2.10” for 84-99 Evolution Big Twin models •Accept special valve guide seals (sold separately) •Sold each •Made in the U.S.A. 0926-0320 SIZE CAST IRON INTAKE CAST IRON EXHAUST GUIDE OD GUIDE ID IN GUIDE ID EX FOR 84-99 EVOLUTION BIG TWIN Std. - 0926-0717 0.5620” 0.3098” 0.3098” +0.001” 0926-0719 0926-0720 0.5630” 0.3098” 0.3098” FOR L79-84 SHOVELHEAD +0.002” - 0926-0758 0.6270” 0.3745” 0.3745” +0.005” - 0926-1998 0.6300” 0.3745” 0.3745” FOR 66-E79 SHOVELHEAD/46-65 PANHEAD Std. - 0926-0745 0.5650” 0.3745” 0.3745” +0.002” - 0926-0749 0.5670” 0.3745” 0.3745” +0.006” - 0926-1983 0.5710” 0.3745” 0.3745” +0.008” 0926-1978 - 0.5730” 0.3745” 0.3745” SPECIAL SHOULDERED CAST IRON VALVE GUIDES •Precision-machined from cast iron •Compatible with no-lead fuel and accept any type of valve-stem material •Overall length of both intake and exhaust is 2.100” for 84-99 models; machined for 0.420” OEM-style valve seals, accept 0.600” lift cams •Overall length of both intake and exhaust is 1.855” for L79-84 models •Overall length of intake is 1.91” and exhaust is 1.855” for 66-E79 models •Accept special valve guide seals (sold separately) •Sold each •Made in the U.S.A. SIZE INTAKE EXHAUST GUIDE OD GUIDE ID IN GUIDE ID EX FOR 84-99 EVOLUTION BIG TWIN Std. 0926-0718 0926-0718 0.5620” 0.3098” 0.3098” +0.001” DS-199760 DS-199760 0.5630” 0.3098” 0.3098” +0.002” DS-199761 DS-199761 0.5640” 0.3098” 0.3098” FOR 36-47 KNUCKLEHEAD +0.002” 0926-2794 - 0.5670” 0.3085” 0.3375” FOR 57-E83 XL Std. 0926-0698 0926-0699 0.5650” 0.3085” 0.3375” +0.001” - 0926-0703 0.5660” 0.3085” 0.3375” +0.002” 0926-0706 0926-0707 0.5670” 0.3085” 0.3375” OEM-STYLE CAST IRON VALVE GUIDES •Precision-machined from cast iron •Compatible with no-lead fuel and accept any type of valve •Overall length is 2.100” intake and 2.150” exhaust for 84-99 models; machined for standard 0.420” seal and can be used for intake or exhaust guide •Overall length of intake and exhaust is 1.90” for 36-47 Knucklehead •Overall length of intake and exhaust is 1.77” for 57-E83 XL •Sold each •Made in the U.S.A. 0926-0758 0926-0703 DS-199760 NOTE: L79-84 guides accept OE seal PART #2050-2053 for 0.625” diameter guides. Machining required for 0.565” diameter seal PART #s 0926-0792 or 0926-0793. NOTE: 66-E79 guides accept OE seal PART #0926-2050 for 0.565” diameter guides and special seals PART #s 0926-0792 or 0926-0793. No machining required for installation.
RkJQdWJsaXNoZXIy NDI5NTY=