WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 7 282 See FATBOOK For Late Model Applications DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 5-7 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. PART # DESCRIPTION 0926-2056 For 84-99 Evolution Big Twin SIDEWINDER® 0.650” VALVE SPRING KIT •Includes springs, upper and lower collars and keys •For valve lift to 0.650” with 1.860”/178 lbs. installed height, 376 lbs. at max lift •Max 6500 rpm •Made in the U.S.A. PART # DESCRIPTION FOR 84-99 EVOLUTION BIG TWIN 0926-1467 7°,5/16” valve stem w/ stock keeper groove (includes steel retainers) 0926-3322 7°,5/16” valve stem w/ stock keeper groove (includes titanium retainers) ECONO BEEHIVE® VALVE SPRING KITS •Made from premium stress-relieved conical ovate wire •Feature extremely high-level of fatigue life •Use a much smaller and lighter weight retainer to reduce valve weight and create quicker rev and smoother motion •Designed to handle the demands of performance engines with 0.585” and smaller lift camshafts •Available for 5/16” valves •PART #0926-1467 includes Econo BeeHive® valve springs, lightweight 7° steel retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton® valve seals equipped with spring-loaded valve stem wiper system •PART #0926-3322 includes Econo BeeHive valve springs, lightweight 7° Ti retainers, machined heat-treated chromoly spring seats, seat shims, valve locks and a set of premium Viton valve seals equipped with spring-loaded valve stem wiper system •Seat lb./installed height; 183 lbs. at 1.760” (0.510” lift), 175 lbs. at 1.785” (0.535” lift), 172 lbs. at 1.803” (0.553” lift), 165 lbs. at 1.825” (0.574” lift), 163 lbs. at 1.835” (0.585” lift), 380 lbs. at 1.250” OPEN HEIGHT coil bind at 1.180” •Dyno proven and track tested •Feuling® BeeHive valve springs must be installed at the correct OPEN HEIGHT, matching max lift to the open height spec of the valve springs •Made in the U.S.A. NOTE: Econo BeeHive® kits are direct replacement with no machining or rocker box clearance required for cams up to 0.574” lift for 84-99 Evolution Big Twin. PART # DESCRIPTION DS-199729 For 48-84 Big Twin HIGH-LIFT VALVE SPRING KIT •To be used with cams with up to 0.550” lift •Includes springs and aluminum top retainers •140 lb. seat pressure •Made in the U.S.A. 0926-1467 0926-3322
RkJQdWJsaXNoZXIy NDI5NTY=