WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for the OldBook. SECTION 17 See FATBOOK For Late Model Applications 756 STANDARD APPLICATION COLOR 11” 11.5” 12” 12.5” 13” 13.5” 14.25” For 84-98 FLT/FLHT/FLHR/FLTR w/o cover Chrome - - PS4049C - PS4002C PS4003C - Black - DS-310034 PS4049B - PS4002B PS4003B - For 91-98 Dyna w/o cover Chrome DS3100611 - DS310060 DS310038 - - - Black DS3100261 - - 1310-0661 - - - For 91-98 Dyna w/ cover Chrome - - DS310036 - - - - Black - - 1310-0704 - - - - For 87-94 FXR w/o cover Chrome - - PS4049C - - DS-222002 DS-310059 Black - DS-310034 PS4049B - - DS-222012 DS-310057 For 73-84 FL/FLH, 85-86 FX/FXWG w/o cover Chrome - - DS-222004 - - - - Black 1310-0703 - 1310-0701 - - - - For 73-84 FL/FLH, 85-86 FX/FXWG w/ cover Chrome - - DS-310089 - - - - For 79-85 XL, 77-78 XLCR w/o cover Chrome - - PS4049C - - DS-222002 DS-310059 Black - DS-310034 PS4049B - - DS-222012 DS-310057 For 53-78 XL Chrome - - - - - DS-222009 DS-222003 1 Fender on FXDWG must be modified - see diagram. HEAVY-DUTY APPLICATION COLOR 11” 11.5” 12” 12.5” 12.6” 13” 13.5” For 84-98 FLT/FLHT/FLHR/FLTR w/o cover Chrome - - - - - 1310-0702 PS4021C Black - - PS4050B PS4124019B - PS4020B 1310-0885 For 66-72 FL/FLH w/ cover Chrome - - - - - - DS-310087 For 91-98 Dyna w/o cover Chrome - - - - PS4048C - - Black - - DS310068 - PS4048B - - For 91-98 Dyna w/ cover Chrome - - PS4046C - - - - Black - - 1310-0705 - - - - For 87-94 FXR w/o cover Chrome - - - - - PS4002C PS4003C Black PS4022B 1310-0663 PS4050B PS4001B - PS4002B PS4003B For 79-85 XL, 77-78 XLCR w/o cover Chrome - - - - - PS4002C PS4003C Black PS4022B 1310-0663 PS4050B PS4001B - PS4002B PS4003B 412 SERIES SHOCKS •Manufactured from the finest materials available •Designed specifically for Harley-Davidson models •The 412’s simple, durable design makes them a cost-effective improvement to your motorcycle’s suspension performance •A five-position cam-style spring-load pre-load adjuster lets you easily dial in your ride •Available with either a standard or heavy-duty progressive spring rate •Multiple style options available •Sold in pairs NOTE: All shocks are measured center-of-eyelet to center-of-eyelet. NOTE: A shock which is slightly longer than stock may alter the head angle slightly and provide somewhat quicker steering. NOTE: A shock which is slightly shorter than stock may alter the head angle slightly and provide somewhat slower steering. NOTE: Heavy-Duty Applications are recommended for bikes that are operated at or near the manufacturer’s maximum load rating over 50% of the time. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact. To use the 11” or 11.5” shocks on FXDWG models, the fender must be modified as follows: When the shock is compressed, the belt guard will hit the fender edge (see Figure 1). Trim the fender as shown in Figure 1 inset. After the fender is trimmed, install one shock with springs removed and compress shock to verify that belt guard clearance is sufficient. Chrome w/ covers Black Chrome Black w/ covers
RkJQdWJsaXNoZXIy NDI5NTY=