BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | STREET ELECTRICAL & GAUGES 624 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # Hi-Lux 2.0 wiring harness and switch kit 2050-0547 HI-LUX 2.0 WIRING HARNESS AND SWITCH KIT • State-of-the-art, high amperage, plug-and-play wiring harness •Designed to provide hassle-free installation and operation with existing lighting setup • Utilizes a unique connector only compatible with Speed Demon 40” and 50” Hi-Lux 2.0 straight light bars; connector must be removed for a hard-wire installation •Features weatherproof on/o ff switch for added convenience and durability 70 WIRING HARNESSES DESCRIPTION PART # One-light wiring harness (H1) 2050-0332 One-light high-power harness (HP1) 2050-0334 DESCRIPTION PART # Two-light wiring harness (H2) 2050-0333 Two-light high-power harness (HP2) 2050-0352 DESCRIPTION PART # Two-light wiring harness for 6”, 7” and 9” high-lux round lights 2050-0370 Wireless remote switch for H1, H2, HP1, HP2 2050-0335 CONNECTORS AND ADAPTERS DESCRIPTION PART # Amp connector (harness end) 2050-0351 Amp connector (light end) 2050-0350 DT connector (harness end) 2050-0337 DT connector (light end) 2050-0336 DESCRIPTION PART # DT female amp to male DT plug adapter 2050-0339 DT female to male plug adapter 2050-0338 DT male to female extender - 3M 2050-0369 DT male to female plug extender - 1M 2050-0340 DESCRIPTION PART # Fog light wiring adapter, pr. 2050-0445 TR1 harness adapter 2050-0371 MISCELLANEOUS REPLACEMENT HARDWARE DESCRIPTION PART # 12V relay 2050-0341 DESCRIPTION PART # Replacement rocker switch for H1, H2, HP1 2050-0346 DESCRIPTION PART # Replacement waterproof rocker switch 2050-0348 WIRING HARNESSES, CONNECTORS AND MISCELLANEOUS REPLACEMENT HARDWARE DESCRIPTION PART # Coax plug battery cord 2130-0072 Coax switch cord 2130-0073 Dual coax switch cord 2130-0080 DESCRIPTION PART # Male cigarette lighter plug adapter 2130-0075 Male coax to two female coax splitter 2130-0074 SAE male to coax 2130-0110 DESCRIPTION PART # SAE to coax female adapter 2130-0077 25” extension cable 2130-0111 40” extension cable 2130-0112 GEN X CORDS,ADAPTERS AND HARNESSES •For use with GEN X-3 and GEN X-4 heated apparel •Coax plug battery cord: connects between vehicle’s 12V power source and heated clothing; 20” L and includes dust cap •Coax switch cord: connects between battery cord and heated clothing for single-output on/off selection; 30” L (expands to 45” L) •Dual coax switch cord: connects between battery cord and heated clothing for dual-output on/o ff selection (e.g. controls jacket and gloves separately); 22” L power cord with two 14” L output cords; features LED on/o ff display for both switches •Male coax to two female coax splitter: connects to battery cord and splits to allow connection of two separate articles of heated clothing; 5” L •Male cigarette lighter plug adapter: connects between heated clothing and cigarette lighter plug; fits large (auto) or small (BMW, KTM,Triumph,Victory and Ducati) outlets; 5” L •SAE to coax female adapter: converts GEN X-2 battery cord or battery tender SAE lead to female coax; 5” L; adapter should not be used to power GEN X-2 series gloves with GEN X-3/4 jacket or glove connection points •SAE to coax male adapter: connects the output wires of GEN X-3/4 temperature controller (single or dual) to GEN X-2 heated clothing (or other brands of clothing with SAE connectors); connects GEN X-3/4 gloves to other brands of heated jackets with SAE glove connection plugs coming out of the sleeves; can be used in front of GEN X-3/4 battery cord for connecting your battery chargers with a SAE plug connection •Extension cables: heavy-duty extension cables extend power output location of small battery cord output to the front of the vehicle; useful for connecting GPS or other 12V accessory near the handlebar; available in 25” and 40” lengths DESCRIPTION PART # H1 wiring harness and switch kit 2050-0515 4’ H1 WIRING HARNESS AND SWITCH KIT •Plug-and-play one-light wiring harness engineered for seamless integration with existing lighting setup • Perfect for use where 8’ wiring may be too long and you don’t want to cut/splice wires •Features a weatherproof on/off switch •Designed to provide hassle-free installation and operation •For use with light equipped with a Deutsch (DT) connector 2130-0072 2130-0073 2130-0074 2130-0075 2130-0077 2130-0080 2130-0110 2130-0112
RkJQdWJsaXNoZXIy NDI5NTY=