BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS SERVICE & MAINTENANCE TOOLS 364 DESCRIPTION PART # 5-in-1 damper rod bleed tool 3805-0154 5-IN-1 DAMPER ROD BLEED TOOL •Tool design allows for effortless retrieval of damping rod after spring installation • Perfect for working on Kayaba, Showa and WP inverted forks •One-piece design means no lost parts •Rod includes downward-facing bleed port to prevent oil splatter • Five thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0 •Precision billet aluminum construction with durable blue anodized finish and laser-engraved markings DESCRIPTION PART # Fork cartridge holding tool 3805-0077 FORK CARTRIDGE HOLDING TOOL FOR SHOWA BPF FORKS • Holds fork cartridges for disassembly, assembly and removal of cartridge seal head from the tube DESCRIPTION PART # Cartridge fork holding tool TFHP01 CARTRIDGE FORK HOLDING TOOL •Makes disassembly and assembly of twin-chamber cartridge forks easier by holding cartridge rod while bottom nut is loosened or tightened DESCRIPTION PART # Cartridge bleeding tool kit 3805-0004 CARTRIDGE BLEEDING TOOL KIT •Easily threads onto the damping rod to facilitate cartridge fork bleeding when changing fork oil •Baffled to eliminate the mess normally encountered when bleeding cartridges • Kit includes adapters for 10 mm L x 1.0 mm, 12 mm L x 1.0 mm, 12 mm L x 1.25 mm and 14 mm L x 1.0 mm damping rods •Zinc coated DESCRIPTION PART # Damping rod holding tool 3805-0139 DAMPING ROD HOLDING TOOL •Tapered aluminum rod designed to make spinning damper rods easier to remove •Taper wedges into most damping rods, holding the rod securely in place DESCRIPTION PART # Damper rod fork tool MP08-117 DAMPER ROD FORK TOOL • Aids in assembly and disassembly of most 41, 43, 46 and 47 mm Kayaba and Showa inverted forks •Not required on Honda CR 91-92 models •Hardened steel with black finish
RkJQdWJsaXNoZXIy NDI5NTY=