BOLD MAGENTA part numbers are new for 2025 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2025 SERVICE & MAINTENANCE TOOLS 367 DESCRIPTION PART # Heavy-duty pin spanner 3805-0211 HEAVY-DUTY PIN SPANNER •Designed for removal and installation of shock reservoirs, screw-in seal heads, fork caps and bearing retainers •Freely pivoting arms span a range of 10.5 mm to 150 mm • Interchangeable 3 mm, 4 mm and 5 mm hardened steel pins (replacement pin set available separately) •3/8” square drive for use with a breaker bar or torque wrench • Curved, low-profile arms easily fit tight areas •Billet heat-treated steel construction for increased strength, rigidity and durability •Durable black oxide finish with laser-engraved markings •Maximum torque rating of 70 lb.-ft. DESCRIPTION PART # Pin spanner wrench 3850-0324 PIN SPANNER WRENCH •Unique curved billet aluminum arms provide clearance and ease of use •Stainless steel shoulder bolt pivot •Replaceable hardened tool steel pins •Includes 4 mm and 3 mm pins •Low-profile pins provide added clearance on fork caps •Durable blue anodized finish with laser-engraved markings •Designed for use on many forks and shock absorbers DESCRIPTION PART # KYB fork compression body removal tool 3805-0145 KYB FORK COMPRESSION BODY REMOVAL TOOL •Fits inside the fork for easy removal of the compression body from the cartridge •One side is 35 mm to fit cartridge and the other is 19 mm for socket or box wrench DESCRIPTION PART # Compression bolt removal tool 3801-0111 COMPRESSION BOLT REMOVAL TOOL FOR KTM •Fits 07-17 KTM with WP 4860 MXMA CC forks •For removing and installing the compression valve assembly from the fork cap •17 mm hex head •Made from billet 6061-T6 aluminum •Anodized finish with laser engraving CAUTION: Fork cap assembly under pressure! Always wear safety glasses and refer to the fork manufacturers for correct assembly and disassembly procedures. DESCRIPTION PART # Fork compression valve removal tool 3805-0022 FORK COMPRESSION VALVE REMOVAL TOOL • For Honda CRF250R 10-12, CRF450R 09-12, Kawasaki KX250F 11-13, KX450F 09-12,Yamaha YZ125/250 05-18, YZ250F/450F 06-18,YZ250FX 06-18 and YZ450FX 16-18 •For removing the compression valve from the fork cartridge •19 mm drive hex; 36 mm octagon •Manufactured from billet 6061-T6 aluminum • Replaces Yamaha OEM YM-01500 and Honda 070MB-MENA100 DESCRIPTION PART # Air fork hex tool (22 mm) 3805-0125 AIR FORK HEX TOOL FOR SHOWA SFF FORKS •Removes the 22 mm lower sealing bolt from Showa SFF Air Fork •Nonmarking 6061 billet aluminum construction •Anodized finish •Made in the U.S.A. DESCRIPTION PART # Fork clicker adjuster tool 3805-0026 FORK CLICKER ADJUSTER TOOL •The easy way to adjust hard-to-reach fork clickers •Tool is made of anodized billet aluminum and is flat enough to fit between the bars and fork tubes on almost any setup
RkJQdWJsaXNoZXIy NDI5NTY=