BOLD MAGENTA part numbers are new for 2025 PARTSCANADA.COM 2025 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS SERVICE & MAINTENANCE TOOLS 368 DESCRIPTION PART # Fork seal bullet set (36, 41, 43, 45, 46, 47, 48 and 49 mm) 3805-0193 36 mm bullet MP08-0273 41 mm bullet 876909 43 mm bullet MP08-0275 DESCRIPTION PART # 45 mm bullet MP08-0276 46 mm bullet MP08-0277 47 mm bullet MP08-0278 48 mm bullet 3805-0001 49 mm bullet 3805-0171 FORK SEAL BULLET TOOLS •Protects the fork seal and wiper of inverted forks from damage by the bushing groove during installation •Saves time by eliminating the need to wrap the fork tube with tape •Available in sets or separately •Each size is a different color DESCRIPTION PART # Fork seal cleaner (ea.) 876972 Fork seal cleaner (card of 12) 0364-0006 SEALMATE™ FORK SEAL CLEANER •Easy way to keep your fork seals clean and debris free •Extracts dirt and debris trapped between fork seal and tube •Works on conventional and upside-down forks •Sold to dealer on a card of 12; sold to consumer as each DESCRIPTION PART # Pre-load adjustment tool SW-1700 PRE-LOAD ADJUSTMENT TOOL •Easily adjusts single shock pre-load rings •Eliminates the hammer-and-punch method •Vinyl-dipped handle for sure grip DESCRIPTION PART # Pre-load spanner wrench SW-783 PRE-LOAD SPANNER WRENCH •The easy way to adjust shock absorber pre-load •Fits 3/8” drive ratchet DESCRIPTION PART # Shock spanner punch 3805-0097 SHOCK SPANNER PUNCH •Ideal tool for turning hard-to-reach lock ring and preload ring on rear shocks, without the need to disassemble the subframe •Long shaft to reach hard-to-get-at shocks •Angled brass tip gives secure bite and protects ring from damage •Heavy-duty construction DESCRIPTION PART # Shock spanner wrench P529 SHOCK COLLAR SPANNER WRENCH •Heat-treated alloy steel • Fits many street, off-road and ATV single shock applications •Sized for 68 and 87 mm OD lock rings with an 8 mm notch DESCRIPTION PART # Shock spanner 3805-0038 STAINLESS STEEL SHOCK SPANNER •Allows adjustment of shock preload •Compatible with majority of shock makes •Constructed of stainless steel; very strong and won’t corrode •Small enough to fit into a tool kit •Made in the U.S.A. DESCRIPTION PART # WP shock clevis jam nut socket 3805-0207 WP SHOCK CLEVIS JAM NUT SOCKET •Designed for removal of oval-profile clevis jam nut common on WP shock absorbers •Open-end design allows for removal of clevis and service to rebound adjuster without disassembly of shock •Durable heat-treated alloy steel construction •Black oxide finish DESCRIPTION PART # Shock spanner wrench OH00710-02 SHOCK SPANNER WRENCH •C-spanner wrench allows you to adjust spring preload •For Öhlins shocks that do not have a hydraulic preload adjuster
RkJQdWJsaXNoZXIy NDI5NTY=