8 VENTILATION The S-R10 is equipped with extensive ventilation points: 11 ventilation ports, 7 intakes including 3 in the chinguard and 4 on the top, plus 4 exhausts, with 2 lateral ports on the chin bar, and 2 on the top rear of the helmet. Chin Vent: This is formed by two openings located at the front of the helmet at the sides of the shield lock mechanism. Each flap has a tab in the corner, which is used to open or close the vent; air entering from this point will be channeled towards the inner side of the shield, and this air effectively prevents fogging and misting. There is also a third ventilation point, located in the middle of the chin area, just below the shield lock: air entering from this point will be channeled towards the inner side of the shield to further prevent misting and fogging. This port is closeable by a rubber bung. Chin Bar Extractor Vents: These are used to extract humid air to the outside of the helmet. Rear Extractor Vents: Under the rear spoiler there are two extractor vents for effective hot air exhausting Top Vent: Activating the large Astars central slider channels air to the top of the head for superior airflow and comfort.
RkJQdWJsaXNoZXIy NDI5NTY=