BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | ATV/UTV AUDIO/COMMUNICATION & MOUNTS 162 DESCRIPTION PART # M10 x 1.25 base 0636-0063 DESCRIPTION PART # M10 x 1.5 base 0636-0064 RAM® MOUNT MALE-THREAD BASES WITH 1” DIAMETER B-SIZE BALL •Powdercoated marine-grade aluminum and rubber construction •Choice of M10 x 1.25 pitch or M10 x 1.50 pitch thread; both with 1” B-size rubber ball •PART #0636-0063 features M10 1.25 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.5 mm and the thread length is 10.15 mm •PART #0636-0064 features M10 x 1.5 pitch male thread connected to a 1” rubber ball; the diameter of the round flange is 14.3 mm and the thread length is 10.5 mm DESCRIPTION PART # RAM® Tough-Ball™ w/ 6 mm threaded stud 0636-0151 RAM® TOUGH-BALL™ WITH THREADED STUD • 1” diameter B-size rubber ball connected to a M6 - 1 x 6 mm threaded post •High-strength composite and steel DESCRIPTION PART # RAM® Track Ball™ w/ T-Bolt attachment 0603-0828 RAM® TRACK BALL™ WITH T-BOLT ATTACHMENT • B-size, 1” diameter rubber ball molded to a high-strength composite base • Rubber friction washer and a stainless steel T-Bolt for sliding into virtually any track system • Insert or slide the Track Ball™ into your track and twist the ball clockwise to tighten in place; twist counterclockwise to loosen DESCRIPTION PART # X-Grip® mount w/ fork stem base 0603-0898 Fork stem base w/ 1” diameter B-size ball 0603-0457 RAM® MOUNT MOTORCYCLE FORK STEM BASE WITH 1” DIAMETER B-SIZE BALL •Cleanest way to mount small electronics on your motorcycle •Slide the assembly into the hole of the stem and tighten the machine screw to create a tight fit •Designed to fit into the cylindrical bore wall of fork stems and will work with stems that measure from 0.5” to 1.10” •Powdercoated marine-grade aluminum NOTE: Certain motorcycles require adding electrical tape to the area of the plug that has the largest diameter until it fits snugly in the stem. DESCRIPTION PART # Tough-Track™ composite 3” track 0603-0827 RAM® TOUGH-TRACK™ TOP-LOADING COMPOSITE 3”TRACK •High-strength composite •Can be drilled to any flat surface •Designed to use with #10 screws for easy installation, hardware not included •Works with a wide variety of RAM® track bases to attach cameras, fishing rods, phones, etc. • Track thickness 0.35”, inside track length 3” • Dimensions: 4.75” L x 1.75” W 0636-0063 0603-0457
RkJQdWJsaXNoZXIy NDI5NTY=