BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | ATV/UTV ENGINE & COOLING ENGINE & COOLING 634 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL DESCRIPTION INTAKE LIFT INTAKE DURATION (@ 1 MM) EXHAUST LIFT EXHAUST DURATION (@ 1 MM) PART # ARCTIC CAT DVX400 04-08 (stage 2 int.) (stage 2 exh.) PART #s 0925-0693 and 0925-0694 are designed to be used as a set. These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs, if installed in DVX400 you must install DR-Z400 valve springs. 9.07 mm 238.5 - - 0925-0693 PART #s 0925-0693 and 0925-0694 are designed to be used as a set.These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs, if installed in DVX400 you must install DR-Z400 valve springs. - - 9.07 mm 238 0925-0694 HONDA TRX400EX 99-08,TRX 400X 09/12-14 (stage 3) Single-cam motor. More top-end power than stage 1 with mid-range gain. Uses stock valve springs and rockers. Does not use auto-decompression mechanism. Stock starter sufficient. 9 mm 254 8.9 mm 248.5 0925-0068 TRX450ER 06-07 (stage 3) Single-cam motor. Significantly more top-end power than stage 2.Will work well for Supermoto and big bore/strokers. Uses stock auto-decompression mechanism. Uses stock valve springs. 10.4 mm 251.5 9.05 mm 265 0925-0084 TRX450R 04-09 (stage 3) Single-cam motor. Significantly more top-end power than stage 2.Will work well for Supermoto and big bore/s trokers. Uses stock auto-decompression mechanism. Uses stock valve springs. 10.4 mm 251.5 9.05 mm 265 0925-0084 KAWASAKI KFX400 03-06 (stage 2 int.) (stage 2 exh.) PART #s 0925-0693 and 0925-0694 are designed to be used as a set. These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs. 9.07 mm 238.5 - - 0925-0693 PART #s 0925-0693 and 0925-0694 are designed to be used as a set. These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs. - - 9.07 mm 238 0925-0694 KFX450R 08-14 (stage 2 int.) Dual-cam motor. Intake and exhaust cams sold separately. Good mid-range and top-end increase. Uses stock valve springs. 9.85 mm 245 - - 0925-0258 POLARIS Hawkeye 400 11-14 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Ranger 400 4x4 10-14 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Sportsman 400 4x4 08-14 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Sportsman 450 H.O. 06-07 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Ranger 500 2x4 06-09/4x4 06-07, 10-13 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Scrambler 500 4x4 04 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 Sportsman 500 4x4 01-13 (stage 1) Improved torque in the bottom 1/2 of the rpm range.Almost no loss in high-rpm power. Stock valve springs are OK. Supplied with decompression mechanism. 8.51 mm 219 8.51 mm 219 0925-0701 SUZUKI LT-Z400 03-09/12-14 (int.) (exh.) PART #s 0925-0693 and 0925-0694 are designed to be used as a set. These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs. 9.07 mm 238.5 - - 0925-0693 PART #s 0925-0693 and 0925-0694 are designed to be used as a set. These cams will provide improved full-throttle torque and horsepower at all rpm 4000 and up. Uses stock DR-Z400 valve springs. - - 9.07 mm 238 0925-0694 YAMAHA YFZ450 04-09 (stage 1 int.) Dual-cam motor. Intake and exhaust cams sold separately. Excellent mid-range and top-end increase. Uses stock valve springs. 8.86 mm 269 - - 0925-0034 YFZ450R 09-20, YZF450X 10-11 (stage 2 int.) (stage 2 exh.) Dual-cam engine. Intake and exhaust cams sold separately. Improved throttle response with mid- to top-end-rpm power increase and minimal bottom-end loss. Uses stock valve springs. 8.64 mm 239 - - 0925-1009 Dual-cam engine. Intake and exhaust cams sold separately. Improved throttle response with mid- to top-end-rpm power increase and minimal bottom-end loss. Includes auto-decompression mechanism. Uses stock valve springs. - - 9.14 mm 262 0925-1010 HOT CAMS •High-performance cams •No core required; keep your old camshaft •Designed for use with stock valve springs and rockers in most applications •Made in the U.S.A. 0925-0693
RkJQdWJsaXNoZXIy NDI5NTY=