BOLD MAGENTA part numbers are new for 2026 FUEL/AIR SYSTEMS PARTSCANADA.COM ATV/UTV | 2026 FUEL/AIR SYSTEMS 751 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. POWER-FLO™ DIRT VALVES •Provides maximum fuel for the fire – test results have shown as much as twice the fuel flow as stock fuel valves •Eliminates the stumble in long whooped-out sections •Keeps the carburetor full of fuel at all times •Ensures consistent fuel mixture under all conditions •Machined from lightweight billet aluminum; not a cast piece like the stock petcock FUEL VALVES • Features 1/4” NPT pipe thread on one end and a 1/4” barb on the other •Available with straight or with 90° outlet •Rugged steel construction with zinc plating •Viton® O-ring stands up to most commonly used fuels IN-LINE FUEL VALVES •For use with auxiliary fuel tank or other use requiring an in-line installation •Features double neoprene seals and O-rings •Smooth and positive operation FUEL LINE QUICK-DISCONNECT COUPLINGS •Single or dual shut-off valves •When connected fuel will flow and when disconnected fuel will not flow •Use dual shut-off for fuel tanks equipped with a crossover line • For fuel supply (fuel tank to carburetor), use the original quick-disconnect couplings with the single shut-off valve •Available for 1/4” and 5/16” ID fuel line FITS MODEL DESCRIPTION PART # SUZUKI LT-Z400 QuadSport 03-08 Points downward 0705-0079 YAMAHA YFS200 Blaster 98-06 Dual outlet 3110-D-AH4 FITS MODEL DESCRIPTION PART # YAMAHA (CONT) YFM350 Warrior/Raptor 87-13 Dual outlet 3110-D-AH4 YFZ350 Banshee 87-06 Dual outlet 3110-D-AH4 DESCRIPTION PART# 90° 878123 DESCRIPTION PART# Straight outlet 877242 DESCRIPTION PART # For 3/16” fuel line P537 For 1/4” x 5/16” fuel line 877249 DESCRIPTION PART # For 1/4” fuel line P12-035 For 5/16” fuel line P12-036 DESCRIPTION PART # Single, 1/4” P12-029 Single, 5/16” P12-030 DESCRIPTION PART # Dual, 1/4” P12-037 Dual, 5/16” P12-038 DESCRIPTION PART # REPLACEMENT COMPONENTS Repl. O-ring for PART #P12-029 877283 Repl. O-ring for PART #P12-030 877284 •Capable of withstanding temperatures of -40 to 82 °C (-40 to 180 °F) • These quick-disconnect fittings utilize Viton®-type fluoroelastomer O-rings with superior chemical resistance •Made in the U.S.A. NOTE: Not for use with fuel injected engines. •PART #s P537 and 877249 are not recommended for engines over 200cc •PART #s P12-035 and P12-036 are not recommended for engines over 300cc •Lighter than the stock petcock •Uses stock mounting holes and hardware for easy bolt-on installation •Made in the U.S.A. 3110-D-AH4 0705-0079 P12-035 P12-036 P537 878123 877242 P12-029 P12-030 P12-037 P12-038
RkJQdWJsaXNoZXIy NDI5NTY=