BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | ATV/UTV ELECTRICAL ELECTRICAL 778 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. 3-PIN WIRE HARNESS FOR POLARIS PULSE SYSTEM •Plug and play solution • 12” pigtail wire length •14ga high-quality cross-link wire • Provides quick, easy accessory power •Plugs into Polaris pulse electrical system DESCRIPTION PART # Single 2120-1247 DESCRIPTION PART # 5 pk. 2120-1248 AUXILIARY LIGHT WIRING HARNESSES • PART #2050-0405 features 6’ long 16 AWG leads with 2-pin connectors, for 2-wire LED lights • PART #2050-0407 features 6’ long 16 AWG leads with 2-pin connectors; for two different 2-wire LED lights SWITCH WATT/FUSE PART # Round lighted On/Off switch 300W/40A 2050-0405 SWITCH WATT/FUSE PART # Round lighted On/Off switch 350W/40A 2050-0407 4’ H1 WIRING HARNESS AND SWITCH KIT •Plug-and-play one-light wiring harness engineered for seamless integration with existing lighting setup • Perfect for use where 8’ wiring may be too long and you don’t want to cut/splice wires •Features a weatherproof on/off switch •Designed to provide hassle-free installation and operation •For use with light equipped with a Deutsch (DT) connector DESCRIPTION PART # H1 wiring harness and switch kit 2050-0515 70 REVERSE LIGHT WIRING HARNESS •Effortlessly plugs into back of 7-pin trailer wiring on a vehicle •Seamlessly integrates reverse lights without needing to splice into factory wiring • Plug-and-play •Comes with a weatherproof DT connector •Works with all Speed Demon lights using a DT end •Does not work with AMP connectors •Splitter addition (sold separately) will allow a two-light setup DESCRIPTION PART # Reverse light wiring harness 2050-0516 HI-LUX 2.0 WIRING HARNESS AND SWITCH KIT • State-of-the-art, high amperage, plug-and-play wiring harness •Designed to provide hassle-free installation and operation with existing lighting setup •Utilizes a unique connector only compatible with Speed Demon 40” and 50” Hi-Lux 2.0 straight light bars; connector must be removed for a hard-wire installation •Features weatherproof on/o ff switch for added convenience and durability DESCRIPTION PART # Hi-Lux 2.0 wiring harness and switch kit 2050-0547 2050-0407 2120-1248 2120-1247
RkJQdWJsaXNoZXIy NDI5NTY=