WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2026. SECTION 17 1324 See OLDBOOK For Early Model Applications PART # DESCRIPTION INCLUDED FORK SPRINGS/RATE STROKE LENGTH 0414-07621 For 17-24 FLHT/FLHX/FLHR/ FLTRX w/ conventional forks 12 N/m and 13 N/m 4.567” 0413-0185 For 17-22 FLHXSE, 18-22 FLTRXSE, 22 FLTRK and 17-22 FLHTCUTG 12 N/m and 13 N/m 3.583” 0413-0159 For 14-16 FLHT/FLTR/FLHX 12 N/m and 13 N/m 4.567” 0413-0171 For 18-23 FLFB/FLFBS 9.5 N/m, 10 N/m and 13 N/m 5.118” PART # DESCRIPTION INCLUDED FORK SPRINGS/RATE STROKE LENGTH 0413-0189 For 18-19/23 FXBR, 18-20 FXLR/FXBRS, 18-21 FLSL, 18-23 FXBB/FXBBS/FLHC/FLHCS, 20-23 FXLRS/FXLRST, 22 FXRST 9 N/m, 10 N/m and 11 N/m 5.118” 0413-01882 For 06-10 FXD/FXDL, 06-14 FXDC, 06-17 FXDB, 07 FXDSE, 10 FXDFSE2 10 N/m and 11 N/m 5.039” 1 Includes 1” lowering kit. Not for use with 21” front wheel. Requires 2 qts. of fork oil (PART #OH01309-01, sold separately). 2 Not for use with FLD/FXDWG/FXDLS or FXDF. NIX 22 FORK CARTRIDGE KITS •Öhlins NIX technology separates compression and rebound damping circuits allowing adjustments to one circuit without affecting the other, unlike many other systems •External compression and rebound adjustment •External preload adjustment •Fork springs included (see chart for spring rates) •1” lowering kit included •22 mm piston diameter 0413-0185 0413-0171 PART # DESCRIPTION INCLUDED FORK SPRINGS/RATE STROKE LENGTH 0413-0186 For 23-25 FLHXSE/FLTRXSE, 24-25 FLTRXSTSE 12 N/m, 13 N/m, 14 N/m 4.528” PART # DESCRIPTION INCLUDED FORK SPRINGS/RATE STROKE LENGTH 0413-0183 For 20-24 FXLRS, 20-23 FXFBS 9.5 N/m, 10 N/m, 11 N/m 5.118” 0413-0190 For 18-21 FLSB 9.5 N/m, 10 N/m, 11 N/m 5.118” NIX 30 FORK CARTRIDGE KITS •Öhlins NIX Technology •30 mm internal piston diameter •External preload adjustment •External compression and rebound adjustment 0413-0186 PART # DESCRIPTION STANDARD KITS 0414-0534 For 17-24 FLHR/FLHT/FLHX/FLTRX/FLTRU/FLTRK 0414-0370 For 99-13 FLT/FLHT/FLHR/FLHX/FLTR (except H-D FL Trike) 0414-0386 For 00-17 FLST 0414-0387 For 00-10 FXST 0414-0452 For 10-15 XL883N 0414-0450 For 07 XL50 0414-0450 For 04-10 XL883/C 0414-0452 For 07-10 XL883L 0414-0450 For 06-07 XL883R 0414-0450 For 04-10 XL1200C PART # DESCRIPTION STANDARD KITS (CONT) 0414-0452 For 07-12 XL1200N 0414-0450 For 04-09 XL1200R 0414-0452 For 10-15 XL1200X LOWERING KITS 0416-0103 For 17-24 FLHR/FLHT/FLHX/FLTRX/FLTRU/FLTRK 0416-0097 For 14-16 FLHT/FLHX/FLHR/FLTRX/C 0414-0380 For 97-13 FLT/FLHT/FLHR/FLTR (except H-D FL Trike) 0414-0388 For 00-17 FLST 0416-0099 For 16-21 XL883N MONOTUBE FORK CARTRIDGE KITS •Converts dual damper rod forks to high-performance cartridge forks •Contains high-performance, gas-charged monotube fork cartridges and custom-tuned fork springs •Improves resistance to front brake dive, front end stability, cornering and bottoming control •No modification for forks required PART # DESCRIPTION 0414-0744 For 17-24 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX (except 23 FLHXSE/FLTRXSE) 0414-0743 For 14-16 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX PART # DESCRIPTION 0414-0745 For 02-13 FLHT/FLHX/FLHR/FLTRU/FLTRK/FLTRX 0414-0460 For 06-17 FXD (except for FXDWG/FXDF) MONOTUBE CARTRIDGE FORK KITS •Asymmetrical design places a preload adjuster over a progressive-rate spring in one leg and an aluminum-bodied, sealed cartridge damper on the other; providing superior damping and ride control combined with tunable preload and a new benchmark for high-performance suspension •Improves resistance to front brake dive, front end stability, cornering and bottoming control •Adjustable to standard length or to lower the front end up to 1” •Complete fork internal replacement kit •No modification for forks required •Made in the U.S.A. •Come with fork springs (see chart for spring rates) NOTE: R ecommended rider weight: minimum 150 lbs., maximum 350 lbs. 0416-0097 0414-0388 •Lowering kits lower the front end up to 2” •Made in the U.S.A. NOTE: Lowering kits are not for use on LOW models. •Öhlins setting databank helps achieve the ride you want NOTE: Recommended rider weight: minimum 150 lbs., maximum 350 lbs. 0414-0460 0414-0744
RkJQdWJsaXNoZXIy NDI5NTY=