WINDSHIELDS & FAIRINGS AUDIO, COMMUNICATION & MOUNTS SADDLEBAGS & LUGGAGE SEATS & SISSY BARS FUEL/AIR SYSTEMS EXHAUST TRANSMISSION & DRIVELINE ENGINE GASKETS & SEALS LIGHTING ELECTRICAL HANDLEBARS, CONTROLS & MIRRORS CABLES TANKS & OIL FILTERS BRAKES DASHES & GAUGES FENDERS & LICENSE PLATE FRAMES HARDWARE, COVERS & GENERAL FRAMES & SUSPENSION FOOTRESTS & FLOORBOARDS WHEELS & AXLES All part numbers in BLUE are new for 2026. SECTION 18 1368 See OLDBOOK For Early Model Applications PART # DESCRIPTION 1401-0194 For 99-23 FLT/FLHT/FLHX/FLHR/FLTR and H-D FL Trike WFB™ BENCHMARK FRONT FENDER FOR DRESSER •Stamped from 14-gauge U.S. steel, this 6 1/2” wide fender is E-coated to prevent rust and corrosion with the lowest paint prep in the industry •Fender is predrilled for 21” front wheels for a very radically Kustom look •Rivetless smooth sides and an extended 1.5” rear tail; fender bis a great match for any rear fender and adds a clean yet dramatic flow to your stock FL •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Installation requires use of Klock Blocks front fender mounting blocks available separately, PART #s 1410-0022 and 1410-0023 •The Benchmark fender can be paired with the WFB™ rear fender to complete the Klock Werks Kustom look •Made in the U.S.A. PART # DESCRIPTION FOR 00-17 FXS/FXST/FLST (EXCEPT SPRINGERS) AND CUSTOM APPLICATIONS 1401-0197 16”/17”/18” front wheel 1401-0195 21” front wheel PART # DESCRIPTION FOR 12-17 FLS 1401-0624 16”/17”/18”/19” front wheel (up to 140 series tire) BENCHMARK FRONT FENDERS FOR SOFTAIL •Stamped from 14-gauge U.S. steel, these 6 1/2” wide fenders are E-coated to prevent rust and corrosion with the best paint prep in the industry •The use of precision deep-draw stamping technology ensures a consistent flawless finish while minimizing body work •Fenders for FXS/FXST/FLST models are predrilled to fit 16”/17”/18”, or 21” front wheels •Fender for FLS models is predrilled to fit 16”/17”/18”/19” front wheels (up to 140 series tires) •May also be used in a variety of custom applications •No mounting blocks required •Made in the U.S.A. FOR 18-25 FLHC/FLHCS, 18-20 FLDE, 18-21 FLSL PART # DESCRIPTION 16”/17”/18”/19” FRONT WHEEL 1401-0671 Wrapper 21” FRONT WHEEL 1401-0672 Wrapper FOR 00-13 FXS/FXST/FXSTB/FXSTC, 99-05 FXDWG AND CUSTOM APPLICATIONS PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0043 OR 1410-0044) 1401-0219 Slicer 1401-0223 Wrapper FOR 00-17 FLST (ALL EXCEPT SPRINGER) PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0031 OR 1410-0032) 1401-0265 Thickster 1401-0267 Wrapper NARROW FOR 00-13 FXS/FXST/FXSTB/FXSTC, 99-05 FXDWG AND CUSTOM APPLICATIONS WITH UP TO 100/100-21 SERIES TIRES PART # DESCRIPTION 21” FRONT WHEEL (REQUIRE MOUNTING BLOCKS PART #1410-0045 OR 1410-0046) 1401-0282 Slicer FOR 99-05 FXD PART # DESCRIPTION 19” FRONT WHEEL 1401-0530 Wrapper HUGGER SERIES FRONT FENDERS •Steel fenders are thick enough to add rigidity to the front end by acting like a fork brace, but can still be cut or shaped enough for an even more Kustom appearance •All fenders come predrilled and are stamped, not spun, to ensure a consistent finish and minimize body work •E-coated to prevent rust and corrosion •16”, 17”, 18” and 19” fenders measure 6.25” outside width and will accommodate up to a 130 series tire •21” styles measure 5.875” outside width and will fit the current 120/70-21 series tires on 3.5” wide rims •21” Narrow measure 4.5” outside width and will fit models listed with the stock narrow rim and a tire up to 100/100-21 •18-23 models include satin finish fender spacers •Installation requires the use of Klock Werks Hugger mounting blocks (sold separately), see page 1379 •Made in the U.S.A. 1401-0195 1401-0624 Thickster Slicer Wrapper
RkJQdWJsaXNoZXIy NDI5NTY=