BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | OFFROAD HANDLEBARS & HAND CONTROLS 132 DESCRIPTION PART # 2” pivoting bar risers for 1 1/4” handlebars 0602-0791 2” PIVOTING BAR RISERS FOR 1 1/4” HANDLEBARS FOR BMW S1000XR 14-20, R1200/1250GS (WATER COOLED) 13-20 • 2” rise with 1 1/4” stem •Accept 1 1/4” handlebars •Pivot forward or backward depending on rider preference •Work with stock cables •The risers come with low profile caps to replace the OEM bar clamp caps •Feature clear anodized finish •Made in the U.S.A. NOTE: Always check and confirm that your machine has adequate cable and brake line length before installing handlebar risers. DESCRIPTION PART # 1 3/4” PIVOTING RISERS FOR BMW F 800/850 GS, KTM 250/300/450/500 XC-W/ EXC-F AND 690/990/1190/1290 ADVENTURE/SUPER ADVENTURE Black anodized 0602-0658 Clear anodized 0602-0438 KTM special edition orange 0602-0909 DESCRIPTION PART # 2” PIVOTING RISERS FOR BMW F 800 GT/R 1200 GS 13-18; KTM 250/300 XC, 350/450 EXC/SX-F/ XC-F/XC-W, 500 EXC/EXC-F/XC/XC-F (ALL), 690 E/R, 990 ADV/BAJA/SUPER ENDURO, 1190 ADV, 1290 SUPER ADV (ALL); TRIUMPH TIGER 800 XC/XCS 11-17,TIGER 1200 EXPLORER; YAMAHA XT1200Z SUPER TENERE THRU 13 Black anodized 0602-0653 Clear anodized 0602-0651 Natural aluminum 0602-0437 PIVOTING HANDLEBAR RISERS •Very popular addition for the BMW R 1200 GS, R 1200 GSA, HP2 and KTM 690 Enduro • Also fit many other street, offroad and dual sport models with a 1 1/8” stem clamp and a 1 1/8” handlebar •Handlebar clamps can be pivoted to desired fore and aft location to achieve ideal riding position •Engineered and tested for maximum strength and durability •CNC machined from billet 6061-T6 aluminum, then anodized for long-lasting good looks •Made in the U.S.A. NOTE: First determine if you have adequate brake line/cable length, and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0651 0602-0658 0602-0438 0602-0909 DESCRIPTION PART # ELITE RISERS FOR 7/8” BAR CLAMPS AND 7/8” OR 1 1/8” HANDLEBARS Black anodized 0602-0907 Aluminum finish 0602-0362 DESCRIPTION PART # RISERS FOR 1 1/8” BAR CLAMPS AND 1 1/8” HANDLEBARS Black anodized 0602-0985 Aluminum finish 0602-0644 ANTI-VIBRATION 2” PIVOT RISERS •Independent left and right risers adapt to any handlebar clamp width •Anti-Vibe design reduces vibration in bars and helps reduce rider fatigue •Dual rotation points allow rider to select optimum riding position for comfort and control •Rox Elite Series risers allow you to clamp 7/8” or 1 1/8” taper bars •Engineered and tested for maximum strength and durability •CNC machined from billet 6061-T6 aluminum •Made in the U.S.A. U.S. Patent # 6,920,806 BZ. NOTE: Confirm you have sufficient clearance below Anti-Vibe bolt when turned full left or right; bolt extends below OE saddle clamp 7/8”. NOTE: Longer cables may be required when installing handlebar risers. NOTE: First determine if you have adequate brake line/cable length and stem clamp clearance before installing handlebar risers. Longer cables may be required when installing handlebar risers on some models. 0602-0907 0602-0644
RkJQdWJsaXNoZXIy NDI5NTY=