BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | OFFROAD FUEL/AIR SYSTEMS FUEL/AIR SYSTEMS 864 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # 1/8” ID 3’ Length 877265 25’ Roll 877207 3/16” ID 3’ Length 877266 25’ Roll 877208 1/4” ID 3’ Length 877267 DESCRIPTION PART # 1/4” ID (CONT) 25’ Roll 877209 5/16” ID 25’ Roll 877210 3/8” ID 3’ Length 877269 25’ Roll 877211 PVC VENT LINES • Constructed of soft, flexible plasticized PVC tubing •Safe to use with any type of gasoline or alcohol-type fuel •Smooth hard bore helps prevent interior buildup •Recommended for venting and overflow lines •Flexible down to -17 °C (0 °F) •Maximum dry heat temp is 104 °C (220 °F) • Sold in 3’ lengths and 25’ rolls •Made in the U.S.A. NOTE: Not for use with fuel-injected engines. DESCRIPTION PART # FUEL LINE, 3’ 3/16”, black M62091 3/16”, clear M6209 DESCRIPTION PART # FUEL LINE, 3’ (CONT) 1/4”, black M62191 1/4”, clear M6219 DESCRIPTION PART # CARB VENT LINE, 5’ 1/8”, black M61091 1/8”, clear M6109 FUEL AND CARBURETOR VENT LINE •This quality-made fuel line will not harden or crack •Fuel line is made of premium polyurethane •Available in 1/4” and 3/16” ID; carburetor vent line available in 1/8” ID • Fuel line available in 3’ lengths • Carb vent line comes in 5’ lengths •Choice of black or clear •Made in the U.S.A. NOTE: Not to be used with fuel over 10% alcohol. DESCRIPTION PART # PLAIN – FUEL 3/16” ID x 25’ L 0706-0013 1/4” ID x 25’ L 0706-0014 5/16” ID x 25’ L 0706-0015 DESCRIPTION PART # REINFORCED CLEAR NYLON FUEL LINE 3/16” ID x 25’ L 0706-0227 REINFORCED – FUEL/OIL 1/4” ID x 25’ L 0711-0060 DESCRIPTION PART # REINFORCED – FUEL/OIL (CONT) 5/16” ID x 25’ L 0711-0061 3/8” ID x 25’ L 0711-0062 UNIVERSAL FUEL/OIL LINE • Universal, black fuel/oil line in 25’ rolls •Reinforced line is fuel- and oil-resistant NOTE: Not for use with fuel containing more than 10% alcohol. DESCRIPTION PART # 3/16” ID 3’ Length 877261 25’ Roll 877212 1/4” ID 3’ Length 877262 25’ Roll 877213 DESCRIPTION PART # 5/16” ID 3’ Length 877263 3/8” ID 3’ Length 877264 BRAIDED FUEL LINES •Nylon-reinforced vinyl fuel line •Braided nylon within the tubing wall provides added strength •Outstanding appearance for custom fuel lines •Flexible down to -3.8 °C/25 °F •Maximum operating temp is 65 °C (150 °F) • Sold in 3’ lengths and 25’ rolls •Made in the U.S.A. NOTE: Not for use with fuel-injected engines. 0706-0013 0711-0060 Clear Black 877208
RkJQdWJsaXNoZXIy NDI5NTY=