BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | SNOW HANDLEBARS & CONTROLS HANDLEBARS & CONTROLS 188 PIVOT ADAPTER KIT PIVOT-STYLE RISER BLOCK CONVERSION KIT •Machined from 6061-T6 aluminum for added strength •Raises bars an additional 1.25”; for use with PowerMadd pivot riser blocks • Choose a PowerMadd Riser Block height of 2”, 4”, 6”, 8” or 10”, or an OEM pivot-style riser block (sold separately) •Fits all snowmobiles with a flat-top steering post • Converts a flat-top steering post to a “T” style post, to use 4.25” Pivot Style Risers •Handlebars can be pivoted forward or back from original stock position • Using pivot adapter and 2” riser block will not require extending cables or wiring on most snowmobiles •Includes four C-clamps and all needed mounting hardware UNIVERSAL PIVOT RISER SYSTEM •Works on all brands of snowmobiles with flat steering post • Raises bars 3” and can be used without additional riser blocks •Add additional riser blocks to increase bar height an additional 3” • 3.5” W • Use PowerMadd’s Throttle Cable Extension Kit to lengthen the stock throttle cable, if necessary NOTE: Before installing handlebar risers verify proper cable length and routing. RISER KIT FOR POLARIS PROTAPER BARS • Kit includes a 2” riser block and replacement bolts that work with one-piece top clamp •Extended length brake lines and throttle extensions may be needed, sold separately NOTE: The maximum height allowed to raise bars without extending cables will change with the PROTAPER bar height. Check before purchasing riser kit. FITS MODEL PART # Arctic Cat (all thru 99) 15581 Arctic Cat (all 00-current) 15580 FITS MODEL PART # Polaris 15581 Ski-Doo 15582 DESCRIPTION PART # Universal 3” Pivot Adapter/Riser 0602-0098 DESCRIPTION PART # Universal Riser Block 3” 0602-0099 NOTE: With the use of a pivot adapter kit the Pivot-style Riser Blocks can be used on a flat steering post. NOTE: Order an Arctic Cat model of the PowerMadd Pivot Riser Blocks to fit on the Yamaha pivot adapter. NOTE: Older Arctic Cat models with 1/4” clamp bolts and Ski-Doo Rev and Yamaha models with threaded holes require drilling of the steering plate. If you convert the sled back to stock, you must use nuts underneath the plate to secure the clamp. 15580 0602-0098 Powermadd provided caps Universal pivot without additional riser stock Stock caps FITS MODEL PART # POLARIS 800 SKS 16-18 0602-0767 800 SKS 155 19 0602-0767 Dragon RMK 09-10 0602-0767 FITS MODEL PART # POLARIS (CONT) Pro RMK 11-19 0602-0767 RMK Assault 09-18 0602-0767 RMK Assault 155 19 0602-0767 FITS MODEL PART # POLARIS (CONT) Switchback Assault 11-17 0602-0767
RkJQdWJsaXNoZXIy NDI5NTY=