BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | SNOW HEATED APPAREL SEE PAGE 4 FOR AN IMPORTANT SAFETY WARNING 80 GEN-X4 HEATED SOCKS • Extremely comfortable, made with 85% polyester and 15% Lycra® •Provide heat on the top and bottom of toes •ZEPTO® fiber heat technology covers the entire foot area, providing uniform heat •Custom-fit design for left and right feet •Fit under tall or short boots •Engineered to go with Gen-X4 leg chaps (by connecting to hideaway plugs at the bottom of pant liners or leg chaps) or can be used by themselves (using Gears battery cord, PART #2130-0072 and Gears foot warmer Y cord, PART #607437) NOTE: GEN-X3 and GEN-X4 are fully compatible. GEN-X4 FOOT WARMERS •Lightweight EVA foam construction for warmth and comfort •Anti-slip material on bottom to keep foot warmers in place •Carbon fiber heating element covers almost the entire foot area for even heat distribution •Provide 14.5W of heat while drawing 1.2A per pair •Easy to install and remove for use in any boot •Trim to fit most boot sizes •For use with GEN-X4 heated chaps liner: no additional hook-ups are required; simply plug directly into the plugs hidden in leg ends • For use with GEN-X4 Warm Tek heated jacket liner or vest: purchase Y foot warmer harness (PART #607437) • For independent use: purchase Y foot warmer harness (PART #607437) and coax plug battery cord (PART #2130-0072) •See pages 80-81 for GEN-X3 cords and controllers NOTE: The GEN-X4 line of heated clothing is NOT COMPATIBLE WITH GEN-X2 or GEN-X3 line of heated clothing (except for cords, controllers and battery packs).Any combined use will ruin the heated clothing. SIZE PART # M 3431-0255 COLOR PART # Black 3431-0252 GEN-X CORDS,ADAPTERS AND HARNESSES •For use with GEN-X3 and GEN-X4 heated apparel •Coax plug battery cord: connects between vehicle’s 12V power source and heated clothing; 20” L and includes dust cap •Coax switch cord: connects between battery cord and heated clothing for single-output on/off selection; 30” L (expands to 45” L) •Extension cables: heavy-duty extension cables extend power output location of small battery cord output to the front of the vehicle; useful for connecting GPS or other 12V accessory near the handle bar; available in 12”, 25” and 40” lengths •Male cigarette lighter plug adapter: connects between heated clothing and cigarette lighter plug; fits large (auto) or small (BMW, KTM,Triumph,Victory and Ducati) outlets; 5” L •Male coax to two female coax splitter: connects to battery cord and splits to allow connection of two separate articles of heated clothing; 5” L •SAE to coax female adapter: converts GEN-X battery cord or battery tender SAE lead to female coax; 5” L; adapter should not be used to power glove connection points DESCRIPTION PART # Coax plug battery cord 2130-0072 Coax switch cord 2130-0073 Extension cable, 12” 607438 Extension cable, 25” 2130-0111 DESCRIPTION PART # Extension cable, 40” 2130-0112 Male cigarette lighter plug adapter 2130-0075 Male coax to two female coax splitter 2130-0074 SAE to coax female adapter 2130-0077 DESCRIPTION PART # SAE to coax male adapter 2130-0110 Snap on/off glove harnesses 2130-0079 Y foot warmer cord 607437 Y glove harness 2130-0078 •SAE to coax male adapter: connects the output wires of GEN-X temperature controller (single or dual) to other brands of clothing with SAE connectors; connects GEN-X gloves to other brands of heated jackets with SAE glove connection plugs coming out of the sleeves; can be used in front of GEN-X battery cord for connecting your battery chargers with a SAE plug connection •Snap on/off glove harnesses: connect heated gloves or glove liners to the heated vest; sold in pairs; 35” L •Y foot-warmer cord: used to run Gears foot warmers or heated socks on their own, or along with one other heated clothing item; end of cord has a male coax plug that connects to the power source and a female coax plug that can be used to connect other heated clothing or gloves/glove liners, along with their required cable (if intending to use with upper clothing along with the foot warmer/ socks on the same circuit); DC connector plugs are 5.5 mm in size •Y glove harness: connects between battery cord and heated gloves or glove liners for use without heated vest/jacket; 42” cord runs from battery cord and splits into 31” L and 45” L glove connecting cords 2130-0072 2130-0112 2130-0073 607438 2130-0075 2130-0074 2130-0077 2130-0110 2130-0078 607437 2130-0079
RkJQdWJsaXNoZXIy NDI5NTY=