BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | STREET EXHAUST EXHAUST 10 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL DESCRIPTION PART # EMIS* APRILIA RS 660 21-24,Tuono 660 21-24 2-into-1 header w/ carbon muffler and carbon end cap (catalytic converter located in front part of pre-muffler; no re-mapping required) 1810-2881 3 RS 660 21-25,Tuono 660 21-25 2-into-1 header w/ carbon muffler and carbon end cap (ECU re-mapping is mandatory) 1810-3276 3 BMW G 310 GS 17-24, G 310 R 17-24 1-into-1 header w/ stainless muffler and carbon end cap (catalytic converter included) 1810-3054 3 Optional carbon fiber heat shield to replace stock heat shield 1861-1620 N/A S 1000 RR 20-25, M 1000 RR 20-24, S 1000 R/M 1000 R 21-25 4-into-1 header w/ titanium muffler and carbon end cap (ECU is re-mapping recommended; carbon muffler bracket included if passenger pegs are removed) 1810-2899 3 Optional carbon fiber heat shield 1861-1355 N/A HONDA CBR650F 14-18, CB650F 14-18, CBR650R 19-20, CB650R 19-20 4-into-1 header w/ titanium muffler and carbon end cap 1810-2680 3 CBR650R 19-23, CB650R 19-23 Mandatory fitting kit (includes extension harness for stock lambda cable and lambda plug; fits models w/ one lambda sensor) 1861-1828 3 CBR650R 24-25, CB650R 24-25 Mandatory fitting kit (includes extension harness for stock lambda cable; fits models w/ two lambda sensors) 1860-2473 3 CBR1000RR-R Fireblade SP 24-25 4-into-1 header w/ titanium muffler and titanium end cap (ECU re-mapping is mandatory; carbon muffler bracket included if passenger pegs are removed) 1810-3281 3 CRF1100L Africa Twin 20-25 2-into-1 header w/ titanium muffler and titanium end cap (race) (ECU re-mapping is recommended; includes carbon fiber clamp; will fit w/ original Honda center stand, engine guard and pannier stays) 1810-3203 3 CRF1100L Africa Twin Adventure Sports 20-25 2-into-1 header w/ titanium muffler and titanium end cap (race) (ECU re-mapping is recommended; includes carbon fiber clamp; will fit w/ original Honda center stand, engine guard and pannier stays) 1810-3204 3 KAWASAKI ZX400 Ninja ZX-4R/RR 23-25 4-into-1 header w/ carbon muffler and carbon end cap 1810-3159 3 ZX600 Ninja ZX-6R 23-25 4-into-1 header w/ carbon muffler and carbon end cap 1810-3166 3 Optional carbon fiber muffer bracket w/ clamp (must order if passenger footrests are removed) 1861-1737 N/A EX650 Ninja 650 17-20, Z650 17-20 2-into-1 header w/ titanium muffler and carbon end cap 1810-2770 3 EX650 Ninja 650 17-25, Z650 17-25 2-into-1 header w/ titanium muffler and titanium end cap (ECU re-mapping is required; fits models w/ two lambda sensors only) 1810-3170 3 Ninja 1000/Z1000SX 14-20 4-into-1 header w/ carbon muffler and carbon end cap (will not fit w/ side cases) 1810-2206 3 ZX1000 Ninja ZX-10R 16-20, ZX-10RR 17-20, ZX-10R SE 18-20 4-into-1 header w/ carbon muffler and carbon end cap (ECU re-mapping is required) 1810-2367 3 ZX1000 Ninja ZX-10R 21-25, ZX-10RR 21-25 4-into-1 header w/ carbon muffler and titanium end cap (ECU re-mapping is required) 1810-2872 3 Optional stainless steel link pipe w/ resonator (for mounting w/ muffler/h eader set from PART #1810-2872; for use on racetracks where lower noise levels are required) 1812-0510 3 Optional aluminum muffler bracket for PART #1810-2872 1861-1579 N/A SUZUKI GSX-8R/S 22-24 2-into-1 header w/ carbon muffler and titanium end cap (no re-mapping required; will fit w/ Suzuki soft side cases) 1810-3139 3 GSX-8R/S 25 2-into-1 header w/ carbon muffler and titanium end cap (check engine light will appear during installation, re-mapping ECU is mandatory; includes carbon fiber heat shield; will fit w/ Suzuki soft side case set) 1810-3231 3 2-into-1 header w/ stainless muffler and stainless end cap (shaped using high-end technology and constructed in one piece from high-grade stainless steel; catalytic converter welded inside muffler; finished w/ carbon fiber cover and honeycomb outlet exhaust protection; will fit w/ Suzuki soft side case set) 1810-3247 3 RACING LINE COMPLETE EXHAUST SYSTEMS •A complete high-quality stainless steel exhaust system made with close attention to detail •Unique design enables it to obtain the maximum output for each specific model of motorcycle while significantly reducing overall weight for top performance in everyday riding or even in the most challenging races •Headpipes/collector/link pipe are made of stainless steel • Muffler sleeves constructed from titanium, carbon fiber or stainless steel • End caps constructed from titanium, carbon fiber or stainless steel •Optional muffler brackets available separately for some models 1810-2872 1810-2899 1810-3203 1810-3231
RkJQdWJsaXNoZXIy NDI5NTY=