BOLD MAGENTA part numbers are new for 2026 EXHAUST PARTSCANADA.COM STREET | 2026 EXHAUST 11 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. FITS MODEL DESCRIPTION PART # EMIS* SUZUKI (CONT) GSX1300R Hayabusa 21-24 4-into-1 header w/ titanium muffler and carbon end cap 1810-2873 3 GSX1300R Hayabusa 25 4-into-1 header w/ titanium muffler and carbon end cap (race) 1810-3253 3 Optional noise damper for PART #1810-3253 1861-1580 3 TRIUMPH Daytona 660 24-25 3-into-1 header w/ black titanium muffler and stainless end cap (race) 1810-3205 3 Black stainless steel heat shield w/ Akrapovic logo (does not fit w/ Triumph paddock stand bobbins; will fit w/ Triumph belly pan) 1861-1646 N/A Mandatory fitting kit 1861-1778 3 Tiger Sport 660 24-25 3-into-1 header w/ black titanium muffler and stainless end cap (race) 1810-3205 3 Black stainless steel heat shield w/ Akrapovic logo (does not fit w/ Triumph paddock stand bobbins; will fit w/ Triumph belly pan) 1861-1646 N/A Mandatory fitting kit 1861-1779 3 Trident 660 21-25 3-into-1 header w/ black titanium muffler and stainless end cap (race) 1810-3205 3 Black stainless steel heat shield w/ Akrapovic logo (does not fit w/ Triumph paddock stand bobbins; will fit w/ Triumph belly pan) 1861-1646 N/A Mandatory fitting kit 1861-1786 3 YAMAHA YZF-R3 15-21 2-into-1 header w/ stainless muffler and stainless end cap 1810-2297 3 MT-03 20-25,YZF-R3 15-25 2-into-1 header w/ carbon muffler and carbon end cap (can use both M12 and M18 lambda sensors) 1810-3234 3 YZF-R6 08-25 4-into-1 header w/ titanium muffler and carbon end cap 1810-2519 3 MT-07/FZ-07 14-16 2-into-1 header w/ titanium muffler and titanium end cap 1810-2225 3 MT-07/FZ-07 14-20, XSR700 16-20 2-into-1 header w/ titanium muffler and carbon end cap 1810-2398 3 MT-07 21-24, XSR700 21-24 2-into-1 header w/ titanium muffler and carbon end cap (catalytic converter included within the system; no re-mapping required; will not fit w/ optional Yamaha engine protectors) 1811-4620 3 MT-07 21-25, XSR700 21-25 2-into-1 header w/ carbon muffler and carbon end cap (race) (will fit w/ Yamaha hard cases) 1810-3229 3 MT-07 21-25 2-into-1 header w/ stainless muffler and stainless end cap (shaped using high-end technology and constructed in one piece from high-grade stainless steel; catalytic converter inside header; finished w/ carbon fiber cover and honeycomb outlet exhaust protection; will fit w/ original Yamaha center stand and engine guards) 1810-3261 3 YZF-R7 21-25 2-into-1 header w/ titanium muffler and titanium end cap (catalytic converter included) 1810-3052 3 2-into-1 header w/ titanium muffler and titanium end cap (race) 1810-3053 3 Optional aluminum muffler bracket (must order if passenger pegs are removed) 1861-1618 N/A MT-09/FZ-09 14-16, FJ-09/Tracer 900 15-16 3-into-1 header w/ titanium muffler and titanium end cap 1810-2230 3 MT-09/FZ-09 14-20, XSR900 16-21 3-into-1 header w/ carbon muffler and carbon end cap (cannot be installed if motorcycle’s central stand is used) 1810-2216 3 MT-09/FZ-09 14-20, XSR900 16-21, FJ-09/Tracer 900 15-20 3-into-1 header w/ titanium muffler and carbon end cap 1810-2410 3 MT-09 21-25 3-into-1 header w/ carbon muffler and titanium end cap (race) 1810-3214 3 MT-09 24-25 3-into-1 header w/ titanium muffler and carbon end cap (catalytic converter included within the system; no re-mapping required; compatible w/ Yamaha hard cases and center stand) 1810-3198 3 MT-09 21-23 Mandatory fitting kit for PART #1810-3214 (includes muffler clamp, bracket and mounting material) 1861-1784 3 MT-09 24-25 Mandatory fitting kit for PART #1810-3214 (includes muffler clamp, bracket and mounting material) 1860-2525 3 Tracer 9/GT/GT+ 21-25 3-into-1 header w/ carbon muffler and titanium end cap (race) (check engine light will appear during installation and ECU re-mapping is mandatory; includes carbon fiber heat shield; will fit w/ Yamaha hard cases/c entral stand; must order fitting kit separately) 1810-3230 3 Tracer 9/GT 21-23 Mandatory fitting kit (includes muffler bracket, cable extension and mounting material; fits models w/ one lambda sensors) 1861-1815 3 Tracer 9/GT+ 24-25 Mandatory fitting kit (includes muffler bracket, cable extension and mounting material; fits models w/ two lambda sensors) 1860-2572 3 XSR900/GP 22-25 3-into-1 header w/ titanium muffler and titanium end cap (catalytic converter included within the system; no re-mapping required; black muffler bracket/h eat shields included; will not fit w/ Yamaha original saddlebags) 1810-3187 3 YZF-R9 25 3-into-1 header w/ titanium muffler and titanium end cap (catalytic converter included within the system; no re-mapping required; aluminum muffler bracket included) 1810-3236 3 3-into-1 header w/ titanium muffler and titanium end cap (race) (ECU re-mapping is mandatory; two different noise inserts and aluminum muffer bracket included) 1810-3237 3 Optional stainless steel link pipe w/ resonator (ECU re-mapping is mandatory; for use on racetracks where lower noise levels are required) 1812-0602 3 YZF-R1/R1M 15-25 4-into-1 header w/ titanium muffler and titanium end cap 1810-2758 3 RACING LINE COMPLETE EXHAUST SYSTEMS (CONT) 1810-2873 1810-3205 1810-3230
RkJQdWJsaXNoZXIy NDI5NTY=