BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | STREET EXHAUST EXHAUST 34 DISCLAIMER: *EMIS (EMISSIONS CATEGORIZATION CODE). SEE PAGES 4-6 FOR CATEGORY CODES, IMPORTANT EPA/CARB EMISSION DEFINITIONS AND REGULATORY COMPLIANCE AND NOTICE REGARDING NOISE REGULATIONS. PRODUCTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES IF NOT CATEGORIZED AS “1” OR “4”. DESCRIPTION PART # EMIS* Stainless steel 1811-2785 3 UNDERBODY SLIP-ON FOR KAWASAKI ER-6N/EX650 NINJA 06-11 •A replacement version aiming to provide high performance • Made of AISI 304 stainless steel, and its internal structure provides a calibration that is tailored to each individual engine •The outer cladding is sanded with stainless steel sand to get the “titanium look” •An end cap with carbon-fiber protection channels exhaust gases out and provides a “barrier effect” against radiated heating of the tire FITS MODEL DESCRIPTION PART # EMIS* HONDA CBR250R 11-13 GP Corsa/Carbon fiber 1811-2781 3 CBR500R 13-15 GP Corsa/Carbon fiber 1811-28301 4 CB500F/R 16-18 GP Corsa Evo/Carbon fiber 1811-32091 4 CB500F/CBR500R/ NX500 19-25 GP Corsa/Carbon fiber 1811-3892 4 GP Corsa Evo/Carbon fiber 1811-3893 4 FITS MODEL DESCRIPTION PART # EMIS* KAWASAKI EX300 Ninja 300 R 13-16 GP Corsa/Carbon fiber 1810-2268 4 EX400/500 Ninja 400/500 18-25, Z400/500 19-25 GP Corsa/Carbon fiber 1811-3535 4 GP Corsa Evo/Carbon fiber 1811-3536 4 1 Does not fit with center stand. GP CORSA SLIP-ONS • GP CORSA features a stainless steel mounting bracket, a gloss finish on the carbon fiber muffler sleeve and stainless steel end cap • GP CORSA EVO features a stainless steel mounting bracket, a gloss finish on the carbon fiber muffler sleeve and a Technopolymer end cap •Maximum horsepower boost across the rpm range (linear power) •Stainless steel internal muffler construction •A deeper race-tuned tone •Removable sound insert for more aggressive tone •Machine-specific tuning to work with stock fuel settings •The geometrical development of the muffler is specific for each engine model, aimed to enhance the torque and maximum power, meeting the required parameters set by EU standards (97/24/EC of June 17, 1997) •Made in Europe •The geometrical development of the muffler is specific for each engine model, aimed to enhance the torque and maximum power •Made in Europe 1811-3535 1811-3893
RkJQdWJsaXNoZXIy NDI5NTY=