BOLD MAGENTA part numbers are new for 2026 LIGHTING PARTSCANADA.COM STREET | 2026 LIGHTING 581 DESCRIPTION PART # Stingerz® LED accent lights 2040-0868 STINGERZ® LED ACCENT LIGHTS • 48” wires with 30-LED panel (11.8” L) in lava color, pre-taped on three sides •Extremely versatile and flexible •Sold in pairs DESCRIPTION PART # Dual intensity side firing auxiliary LED strips (pr.) 2040-3022 DUAL INTENSITY SIDE FIRING AUXILIARY LED STRIPS • Flexible, low-profile auxiliary LED strips designed to mount under the rear fender edge •72 dual-intensity red LEDs per strip are placed at a 90° angle to shine towards the rear • Each strip is 23.5” long with 5’ wire leads to route under the seat for connections for low intensity power (run), high intensity power (brake, turn signal or brake/turn) and ground • LED strips can be cut every 6 LEDs or 1.95” to customize length for an exact fit to the rear fender • 0.310” mounting surface; 0.094” thick COLOR PART # White LED 2040-1292 INDIVIDUAL LED •Great for anywhere you need a spot of light • Great for use as shift lights, dash lights, accent lights and gauge lights • Direct 12VDC hook up, no resistor required • Includes 48” of 22ga wire covered in black sheathing •Available in white •Sold each DESCRIPTION PART # Amber 2040-0652 2.25” CHROME LED CIRCLE •Dual-intensity design with 48 LEDs •Circles can be flush-mounted when bezel is removed and used on outside of fender •Can also be mounted on the outside of fender with longer studs (included) to add a unique and clean detail to your bags or fender •Includes amber lenses •Sold each DESCRIPTION PART # Knight Riderz flashing brake light 2040-1297 KNIGHT RIDERZ FLASHING BRAKE LIGHT •Contains 21 high-power dual-intensity red LEDs •Designed for maximum visibility •Works with any 12VDC system •No load equalizer or resistors required •Sequential running light chases from left to right with running light power •Brake will flash approximately 6 seconds and then go solid until released •Dimensions: 7 1/2” L x 7/10” W x 7/10” H •Sold each • Current draw at 12.8V per 6 LEDs: 14mA rim, 38mA brake; current draw at 14.4V per 6 LEDs: 16mA run, 48mA brake • Universal design, 3-wire installation •Sold in pairs; pre-taped for mounting
RkJQdWJsaXNoZXIy NDI5NTY=