BOLD MAGENTA part numbers are new for 2026 LIGHTING PARTSCANADA.COM STREET | 2026 LIGHTING 589 DESCRIPTION PART # Illuminator Pro III 2050-0043 ILLUMINATOR PRO III METRIC •Works with Metric or European motorcycles that have non-momentary or momentary turn signal switches •Has all the features of a turn signal control module: automatic canceling, front running lights and turn signals on single-filament halogen bulbs, incandescent bulbs or LEDs • Also runs rear running lights, brake light functions, and rear turn signals on single-filament halogen bulbs, incandescent bulbs or LEDs •Two independent wires for in-dash indicators •Built-in load equalizer •Can run up to 70W per corner/station •Push-to-cancel turn signal control is maintained •Emergency flasher mode does not build up heat •For use on all Metric or European bikes except BMW models with integrated brake systems and Honda models that use the turn signal switch to turn on/off front running lights DESCRIPTION PART # LED turn signal diode kit 2050-0323 LED TURN SIGNAL DIODE KIT •Corrects turn signals that stay illuminated and do not flash as a result of switching to LEDs DESCRIPTION PART # Rear accessory harness 2120-0619 REAR ACCESSORY HARNESS FOR HONDA GL1800 GOLD WING 12-17 •Required to install Kuryakyn rear lighting accessory • Once installed, all plug-and-play rear lighting accessories can be installed with ease • Provide run, turn, brake and ground wiring connection behind the license plate center panel •Only one harness required DESCRIPTION PART # Diode kit 2050-0130 DIODE KIT •This kit is required when installing LED lights as turn signals on a motorcycle with a single turn signal indicator light • If this diode kit is not installed, power will backfeed across the indicator light and all turn signals will flash at once •One kit needed per bike DESCRIPTION PART # LED road flare light 3850-0581 LED ROAD FLARE LIGHT •White LED center flashlight •Eight red LEDs •3 emergency light modes •Built-in metal hook can be used as a stand or for hanging the light •Magnet on the back for attaching to metal surface •Operates in temperatures between -20 to 60 °C (-4 to 140 °F) •Polycarbonate lens
RkJQdWJsaXNoZXIy NDI5NTY=