BOLD MAGENTA part numbers are new for 2026 SERVICE & MAINTENANCE TOOLS PARTSCANADA.COM TIRE & SERVICE | 2026 SERVICE & MAINTENANCE TOOLS 347 DESCRIPTION PART # 12V/1.25A charger 02101281 Repl. snap cord, black 0810-06962 DESCRIPTION PART # 25’ snap cord extension 081-0148-25 1 Has eye connectors. 2 Not for sale in California or Oregon. BATTERY TENDER® PLUS •Constantly monitors the battery without the damaging effects of trickle chargers; a trickle charger will eventually boil dry or overcharge a battery • Battery Tender® Plus voltage output compensates for temperature changes, providing additional protection •Initial charge brings battery to full charge at approximately 14.6V • After full charge is reached, converts to float charger and monitors battery at 13.2V •Although a constant charge is being applied to the battery, there is little or no current (approx. 10mA) • Periodic maintenance is recommended, but Battery Tender can monitor a battery for years without the fear of boiling or destroying the battery • 12V Battery Tender Plus has fused quick-disconnect rings with a weather cover NOTE: Earlier model Battery Tenders have a WHITE snap cord connector; later models have a BLACK snap cord connector. These snap cords are NOT interchangeable. DESCRIPTION PART # 4A selectable charger 3807-0401 BATTERY TENDER® 4A SELECTABLE CHARGER •Equipped with proper charge algorithm for charge and maintenance of 6V, 12V,AGM, lead acid or lithium batteries to ensure long-term battery health •Selectable battery chemistry – has battery chemistry selection with proper charge algorithm for lead-acid, flooded or sealed maintenance free (AGM and gel cell) and lithium batteries •Complete four-step charging program (initialization, bulk charge, absorption mode and float mode) •Automatically switches to float/maintenance voltage after fully charging the battery •If the battery voltage drops too far under load, full charger output power resumes •12V at 4A output and 120VAC at 50/60Hz input DESCRIPTION PART # Two-bank charger 3807-0019 BATTERY TENDER®TWO-BANK CHARGER •Provides 12V-1.25A per channel •Features a four-step microprocessor-controlled fully automatic charge program • Protects against sparks, short circuits and reverse polarity while also protecting marginal batteries with a 72-hour safety timer • Solid state, two-color LED indicates stage of charger •Spark-proof and reverse polarity protected • 12’ output cord 0210128 BATTERY TENDER VS SCHUMACHER 3 AMPS AND EZ –CHARGE CHARGERS VOLTAGE ( VDC ) TIME ( HOURS ) BATTERY TENDER SCHUMACHER 3 AMPS EZ –CHARGER
RkJQdWJsaXNoZXIy NDI5NTY=