BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | TIRE & SERVICE SERVICE & MAINTENANCE TOOLS SERVICE & MAINTENANCE TOOLS 376 DESCRIPTION PART # 5-in-1 damper rod bleed tool 3805-0154 5-IN-1 DAMPER ROD BLEED TOOL •Tool design allows for effortless retrieval of damping rod after spring installation • Perfect for working on Kayaba, Showa and WP inverted forks •One-piece design means no lost parts •Rod includes downward-facing bleed port to prevent oil splatter • Five thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 and M14 x 1.0 •Precision billet aluminum construction with durable blue anodized finish and laser-engraved markings DESCRIPTION PART # Damper rod fork tool MP08-117 DAMPER ROD FORK TOOL • Aids in assembly and disassembly of most 41, 43, 46 and 47 mm Kayaba and Showa inverted forks •Not required on Honda CR 91-92 models •Hardened steel with black finish DESCRIPTION PART # Damping rod holding tool 3805-0139 DAMPING ROD HOLDING TOOL •Tapered aluminum rod designed to make spinning damper rods easier to remove •Taper wedges into most damping rods, holding the rod securely in place DESCRIPTION PART # Cartridge fork holding tool TFHP01 CARTRIDGE FORK HOLDING TOOL •Makes disassembly and assembly of twin-chamber cartridge forks easier by holding cartridge rod while bottom nut is loosened or tightened FORK CARTRIDGE HOLDING TOOL FOR SHOWA BPF FORKS •Holds fork cartridges for disassembly, assembly and removal of cartridge seal head from the tube DESCRIPTION PART # Fork cartridge holding tool 3805-0077 DESCRIPTION PART # Fork damping rod tool 3805-0239 FORK DAMPING ROD HOLDER •Allows for effortless retrieval of the dampening rod after spring installation • Works on Kayaba, Showa, and WP inverted forks •Tool provides one rod with M10 x 1.0 end and 4 brass hex adaptors included: M10 x 1.0, M12 x 1.0, M12 x 1.25, and M14 x 1.0 •Rod includes covered bleed port to prevent oil splatter
RkJQdWJsaXNoZXIy NDI5NTY=