BOLD MAGENTA part numbers are new for 2026 V-TWIN TOOLS PARTSCANADA.COM TIRE & SERVICE | 2026 421 PART # DESCRIPTION 3801-0066 For 06 Dyna and all 07-17 Twin Cam CAM ASSEMBLY TOOL •Holds both cams in an upright position while lowering cam support plate over both guides and cam journal guides •Made from a non-marring material that will not damage cam surface •Made in the U.S.A. PART # DESCRIPTION 3801-0160 For 99-17 Twin Cam CAM BEARING INSTALLATION TOOL •Used to install the two inner cam bearings •Designed to press from the letter side of the inner cam bearing to eliminate any damage to the bearings, cam or case • Will set bearings 0.023” to 0.028” below case surface •Made in the U.S.A. PART # DESCRIPTION DS-196196 For 99-06 Twin Cam (except 06 Dyna) CAM CHAIN TENSIONER TOOL •Designed to unload the pressure on the primary and secondary chain tensioners •Also checks spring loads on chain tensioners •Includes instructions •Made in the U.S.A. PART # DESCRIPTION 3801-0310 For M-Eight,Twin Cam and Evolution lifter bores LIFTER BORE MEASURING KIT •A set of precision-ground steel balls to accurately measure lifter bore diameter and bore roundness • Feuling recommends a lifter to lifter bore clearance of 0.001” to 0.0015” for optimum lifter performance • Includes sizes 0.8430”, 0.8435”, 0.8440”, 0.8445” and 0.8450” •Made in the U.S.A. PART # DESCRIPTION 3801-0060 For 06 Dyna and all 07-17 Twin Cam PART # DESCRIPTION DS-196201 For 99-06 Twin Cam (except 06 Dyna) CAM/CRANK SPROCKET LOCK TOOLS •Designed to lock the camshafts and crankshaft sprockets when removing, replacing and torquing the sprocket bolts •Made of non-marring Delrin® •Instructions included •Made in the U.S.A. PART # DESCRIPTION 3801-0434 For 23-24 VVT CVO models CAM PHASER TOOL •Required service tool for accessing the cam chest on VVT engines •Holds the cam phaser assembly in place to allow removal of the spool valve bolt •Lets you get access to the cam plate, oil pump and the cam •CNC machined from 4130 steel DS-196201
RkJQdWJsaXNoZXIy NDI5NTY=