BOLD MAGENTA part numbers are new for 2026 PARTSCANADA.COM 2026 | TIRE & SERVICE V-TWIN TOOLS 432 FORK CAP TOOL •Used in the removal and installation of fork caps on 1948 and later Wide Glide models •Reduces the risk of damage to the fork caps during removal and installation •1/2” square drive •Machined from 6061-T6 aluminum with durable blue anodizing and laser engraved markings PART # DESCRIPTION 3805-0318 For 48-later Wide Glide FORK CAP INSTALLER •Used to install fork tube caps without removing the fork legs from the bike •Made in the U.S.A. PART # DESCRIPTION 3805-0158 For 49 mm fork tubes CASTLENUT SOCKET FOR INVERTED FORKS •For removing and installing internal castlenut on inverted forks •Made in the U.S.A. PART # DESCRIPTION 3805-0189 For 18-20 FLSB/FXFB models MASTER CYLINDER BRAKE BLEEDING SOLUTION •Cleaner way to purge system of air with less fluid used and a reduced chance of cosmetic damage due to brake fluid spillage •Consists of vacuum-bleed device with a transparent cap, which forms a tight seal to the master cylinder and has a fitting to attach a vacuum pump •Master kit includes five different caps and gaskets (vacuum pump not included) •Made in the U.S.A. PART # DESCRIPTION 3850-0296 Master kit for 96-21 Big Twin and 96-03 XL COMBO AXLE WRENCHES •These wrenches are designed for Harley-Davidson models that have 36 mm and 34 mm axles •Ordinary wrenches are simply too large and heavy to carry with you, so we developed updated combo wrenches to handle most make and model combinations •Wrenches are high strength and sport a polished chrome finish to give your fanny pack a little bling PART # DESCRIPTION 3811-0133 34 mm PART # DESCRIPTION 3811-0132 36 mm SADDLEBAG LATCH AND HINGE RIVET TOOL •Secures saddlebag latches and hinges with rivets, while providing a clean factory look •Made in the U.S.A. PART # DESCRIPTION 3850-0247 Saddlebag latch and hinge rivet tool REAR AXLE NUT TORQUE ADAPTER •Adjusts the drive belt tension or rear wheel alignment •Saves time by eliminating need to remove mufflers •1/2” drive receiver hole (compatible with 1/2” torque wrench) •Made in the U.S.A. PART # DESCRIPTION 147748 For 08-13 FLHT/FLHR/FLHX/FLTR, 05-13 V-Rod THIRD HAND AXLE LOCKER TOOL •Prevents axle from moving while torquing down the axle nut after setting belt tension •Eliminates the need for a helper or trying to blindly hold the axle from the other side of the tire •Made in the U.S.A. PART # DESCRIPTION 3805-0070 For 02-21 FLHT/FLHR/FLTR/FLHX AXLE HEX ADAPTER •14 mm x 16 mm axle adapter • Developed for front axle removal on Scout, Chief, Chieftain and Roadmaster motorcycles •Made from heat-treated carbon steel PART # DESCRIPTION 3811-0106 For Indian Scout, Chief, Chieftain and Roadmaster 3811-0132
RkJQdWJsaXNoZXIy NDI5NTY=