BOLD MAGENTA part numbers are new for 2026 CHEMICALS & LUBRICANTS PARTSCANADA.COM TIRE & SERVICE | 2026 CHEMICALS & LUBRICANTS 493 DESCRIPTION PART # #5 (4 L) (Similar SAE 7.5W), 4 L cs. 3609-0110 #5 (1 L) (Similar SAE 7.5W), 1 L, cs. 3609-0069 DESCRIPTION PART # #10 (1 L) (Similar SAE 20W), 1 L cs. 3609-0040 Road and Track fork oil (1 L) (Similar SAE 7.5W), 1 L, cs. OH01309-01 FORK OIL •Formulated for cartridge and damper rod forks •Excellent lubrication for radically reduced friction – wessential for forks with large sweep areas •Ultra-low foaming with a broad temperature range for stable viscosity and negligible fading under the hardest use •Use #5 for cartridge forks •#10 for use in cartridge or conventional damper-rod forks •PART #3906-0110 viscosity rating 19 cSt (centistoke) at 40 °C, PART #3609-0069 viscosity rating at 20 cSt at 40 °C and PART #3609-0040 viscosity rating 40 cSt at 40 °C • PART #s 3609-0069, 3609-0040 are 1 L plastic bottles, 12 per case • PART #3609-0110 are 4 L plastic bottles, 4 per case DESCRIPTION PART # 1 L, cs. OH00105-01 SHOCK OIL •Öhlins shock absorber fluid has a viscosity rating of 28 cSt (centistoke) at 40 °C •The high cSt rating means Öhlins shock fluid won’t thin out as heat increases •The result is negligible fade – even under the most demanding riding conditions • Available in 1 L bottles, 12 per case 3609-0110 3609-0040 DESCRIPTION PART # 400 g 3607-0042 LM 50 LITHO HT • Work-stable, water-resistant, oxidation- and corrosion-resistant, high-performance, lithium-complex soap grease •Ensures a very high standard of wear protection and a high load-carrying capacity •Broad operating temperature range •Friction and wear-reducing •Good corrosion protection •400 g cartridges come 12 per case; sold each DESCRIPTION PART # 20 L tap 3850-0380 TAP •Tap for 20 L bottles/jugs of Liqui Moly oils and lubricants ROAD AND TRACK FORK OIL •High-performance fork oil specially developed for the Road and Track forks • Stable viscosity and negligible fade, even under hard use •Designed to minimize friction and wear on fork internals for longer service intervals •PART #OH01309-01 viscosity rating 19 cSt (centistoke) at 40 °C • PART #OH01309-01 is a 1 L plastic bottle, 12 per case DESCRIPTION PART # 50 g 3607-0041 LM 48 INSTALLATION PASTE •High performance MoS2 paste for extreme demands •Prevents run-in damage and seizing marks when working on bearings and sliding guides, when pressing bolts and bearing bushings and when pulling on roller bearing rings • ”For-life” lubrication of joints and small components •Service temperature of -31 to 842 °F (-35 to 450 °C) •Outstandingly adherent •High wear resistance •Good corrosion protection and low coefficient of friction •Highly economical •Available in 50 g tube; sold each
RkJQdWJsaXNoZXIy NDI5NTY=